Developing an airborne laser scanning dominant height model from a countrywide scanning survey and national forest inventory data

Abstract An airborne laser scanning (ALS) dominant height model was developed based on data from a national scanning survey with the aim of developing a digital terrain model (DTM) for Denmark. Data obtained in the ongoing Danish national forest inventory (NFI) were used as reference data. The data comprised a total of 2072 measurements of dominant height on NFI sample plots inventoried in 2006–2007 and their corresponding ALS data. The dominant height model included four variables derived from the ALS point cloud distribution. The variables were related to canopy height, canopy density and species composition on individual plots. The RMSE of the final model was 2.25 m and the model explained 93.9% of the variation (R 2). The model was successful in predicting dominant height across a wide range of forest tree species, stand heights, stand densities, canopy cover and growing conditions. The study demonstrated how low-density ALS data obtained in a survey not specifically aimed at forest applications may be used for obtaining biophysical forest properties such as dominant height, thereby reducing the overall forest inventory costs.

[1]  M. Maltamo,et al.  Nonparametric estimation of stem volume using airborne laser scanning, aerial photography, and stand-register data , 2006 .

[2]  R. Nelson,et al.  Determining forest canopy characteristics using airborne laser data , 1984 .

[3]  Juha Hyyppä,et al.  Effects of flight altitude on tree height estimation using airborne laser scanning , 2004 .

[4]  Tomas Brandtberg.  Detection and analysis of individual leaf-off tree crowns in small footprint, high sampling density lidar data from the eastern deciduous forest in North America , 2003 .

[5]  Erik Næsset,et al.  Effects of different flying altitudes on biophysical stand properties estimated from canopy height and density measured with a small-footprint airborne scanning laser , 2004 .

[6]  Juha Hyyppä,et al.  Study of surface brightness from backscattered laser intensity: calibration of laser data , 2005, IEEE Geoscience and Remote Sensing Letters.

[7]  K. Lim,et al.  Lidar remote sensing of biophysical properties of tolerant northern hardwood forests , 2003 .

[8]  E. Næsset.  Estimating timber volume of forest stands using airborne laser scanner data , 1997 .

[9]  Terje Gobakken,et al.  Comparing regression methods in estimation of biophysical properties of forest stands from two different inventories using laser scanner data , 2005 .

[10]  Erik Næsset,et al.  Estimating percentile-based diameter distributions in uneven-sized Norway spruce stands using airborne laser scanner data , 2007 .

[11]  E. Næsset.  Effects of different sensors, flying altitudes, and pulse repetition frequencies on forest canopy metrics and biophysical stand properties derived from small-footprint airborne laser data , 2009 .

[12]  M. Heurich,et al.  Estimation of forestry stand parameters using laser scanning data in temperate, structurally rich natural European beech (Fagus sylvatica) and Norway spruce (Picea abies) forests , 2008 .

[13]  E. Næsset.  Practical large-scale forest stand inventory using a small-footprint airborne scanning laser , 2004 .

[14]  E. Næsset,et al.  Estimating tree heights and number of stems in young forest stands using airborne laser scanner data , 2001 .

[15]  Håkan Olsson,et al.  Simulating the effects of lidar scanning angle for estimation of mean tree height and canopy closure , 2003 .

[16]  E. Næsset.  Determination of mean tree height of forest stands using airborne laser scanner data , 1997 .

[17]  W. Cohen,et al.  Surface lidar remote sensing of basal area and biomass in deciduous forests of eastern Maryland, USA , 1999 .

[18]  E. Næsset.  Predicting forest stand characteristics with airborne scanning laser using a practical two-stage procedure and field data , 2002 .

[19]  Erik Næsset,et al.  Assessing sensor effects and effects of leaf-off and leaf-on canopy conditions on biophysical stand properties derived from small-footprint airborne laser data , 2005 .

[20]  Åsa Persson,et al.  Species identification of individual trees by combining high resolution LiDAR data with multi‐spectral images , 2008 .

[21]  Alex C. Lee,et al.  Quantifying Australian forest floristics and structure using small footprint LiDAR and large scale aerial photography , 2006 .

[22]  J. Holmgren,et al.  Estimation of Tree Height and Stem Volume on Plots Using Airborne Laser Scanning , 2003, Forest Science.

[23]  S. Magnussen,et al.  Derivations of stand heights from airborne laser scanner data with canopy-based quantile estimators , 1998 .

[24]  E. Næsset,et al.  Estimating tree height and tree crown properties using airborne scanning laser in a boreal nature reserve , 2002 .

[25]  Terje Gobakken,et al.  Estimating forest growth using canopy metrics derived from airborne laser scanner data , 2005 .

[26]  N. Pfeifer,et al.  Correction of laser scanning intensity data: Data and model-driven approaches , 2007 .

[27]  Åsa Persson,et al.  Detecting and measuring individual trees using an airborne laser scanner , 2002 .

[28]  Klaus I. Itten,et al.  Assessment of the influence of flying altitude and scan angle on biophysical vegetation products derived from airborne laser scanning , 2008 .

[29]  R. Hill,et al.  Quantifying canopy height underestimation by laser pulse penetration in small-footprint airborne laser scanning data , 2003 .

[30]  E. Næsset,et al.  Classifying species of individual trees by intensity and structure features derived from airborne laser scanner data , 2009 .

[31]  Ross Nelson,et al.  Estimating forest biomass and volume using airborne laser data , 1988 .

[32]  K. Mengersen,et al.  Airborne laser scanning: Exploratory data analysis indicates potential variables for classification of individual trees or forest stands according to species , 2005 .

[33]  E. Næsset,et al.  Laser scanning of forest resources: the nordic experience , 2004 .

[34]  Steen Magnussen,et al.  Recovering Tree Heights from Airborne Laser Scanner Data , 1999, Forest Science.