Experimental platform tests for setting performances of distance protection installed in Biskra-Batna of the Algerian transmission line

The modern power system is equipped with protection system based on advanced technology through the use of digital multifunction relay, control system and intelligent selectivity, whose purpose is to ensure maximum security and service continuity of protection relay in the presence of various fault currents. Distance protection is an important protection required in high voltage transmission lines. In this paper, experimental platform tests have been performed and proposed for setting and evaluation the performances of distance protection named Micom P442 installed in Biskra-Batna of the Algerian transmission power system. The performances of the distance protection have been evaluated under various short circuits. In this study, experimental result based single phase fault to ground is analysed and discussed. Experimental results based on the proposed platform tests in terms of precision in detecting faults at various locations and trigger times confirm the efficiency and particularity of the proposed experimental platform tests.

[1]  Ahmed Jasim Sultan,et al.  Coordination of directional overcurrent and distance relays based on nonlinear multivariable optimization , 2020 .

[2]  Hassan Saad,et al.  DISTANCE PROTECTION RELAY PERFORMANCE ENHANCEMENT THROUGH INTEGRATED CONTROL SYSTEM , 2019 .

[3]  Majid Sanaye-Pasand,et al.  Improved zone-3 distance protection based on adjacent relays data , 2018, International Transactions on Electrical Energy Systems.

[4]  Mohd Zainal Abidin Ab Kadir,et al.  A review of adaptive overcurrent protection in distribution networks with integration of distributed energy resources , 2020 .

[5]  Bijaya Ketan Panigrahi,et al.  Qualitative Assessment of Power Swing for Enhancing Security of Distance Relay in a TCSC-Compensated Line , 2020 .

[6]  Atieh Delavari,et al.  Real-Time Modeling and Testing of Distance Protection Relay Based on IEC 61850 Protocol , 2019, 2019 IEEE Canadian Conference of Electrical and Computer Engineering (CCECE).

[7]  R.K. Aggarwal,et al.  An enhanced zone 3 algorithm of a distance relay using transient components and state diagram , 2004, IEEE Transactions on Power Delivery.

[8]  Ebrahim Mansy,et al.  Distance relay-based phasor measurements for protection of transmission lines with UPFC , 2020 .

[9]  K. H. Tseng,et al.  Load Model Effects on Distance Relay Settings , 2002, IEEE Power Engineering Review.

[10]  Jae-Eon Kim,et al.  Method for Protection of Single-Line-Ground Fault of Distribution System with DG Using Distance Relay and Directional Relay , 2020 .

[11]  M. Kezunovic,et al.  Distance Relay Application Testing Using a Digital Simulator , 1997, IEEE Power Engineering Review.

[12]  Belkacem Mahdad,et al.  An Experimental Educational Platform Based Arduino-GSM for Power System Protection , 2018, 2018 International Conference on Communications and Electrical Engineering (ICCEE).

[13]  José A. González-Cueto,et al.  A mho type phase comparator relay guideline using phase comparison technique for a power system , 2021 .

[14]  Cholleti Sriram,et al.  Three zone detection and distance relay co-ordination of power system protection , 2021 .

[15]  Mohamed A. Mehanna,et al.  Enhancing the performance of distance protection relays using interactive control system , 2019 .

[16]  Abdelaziz Chaghi,et al.  Effect of renewable energy sources integration on the optimal coordination of directional over-current relays in distribution system , 2020 .

[17]  Auday A.H. Mohamad,et al.  DESIGN A FAST DIGITAL PROTECTIVE RELAY ALGORITHM FOR HIGH VOLTAGE TRANSMISSION LINE , 2014 .

[18]  Samuel Borroy Vicente,et al.  Improved Faulted Phase Selection Algorithm for Distance Protection under High Penetration of Renewable Energies , 2020 .