Thermal and electrical properties of poly(l-lactide)-graft-multiwalled carbon nanotube composites

Abstract The dispersion of the nanometer-sized carbon nanotubes in a polymer matrix leads to a marked improvement in the properties of the polymer. This approach can also be applied to biodegradable synthetic aliphatic polyesters such as poly( l -lactide) (PLLA), which has received a great deal of attention due to environmental concerns. In this study, PLLA was melt compounded with multiwalled carbon nanotubes (MWCNTs). A high degree of dispersion of the MWCNTs in the composites was obtained by grafting PLLA onto the MWCNTs (PLLA-g-MWCNTs). After oxidizing the MWCNTs by treating them with strong acids, they were reacted with l -lactide to produce the PLLA-g-MWCNTs. The morphology of the composite was observed with scanning electron microscopy. The mechanical properties of the PLLA/PLLA-g-MWCNT composite were higher than those of the PLLA/MWCNT composite. The thermal stability of the composites was studied using thermogravimetric analysis and their activation energy during thermal degradation was determined using the Kissinger and Flynn–Wall–Ozawa methods. The activation energy of PLLA/PLLA-g-MWCNT was higher than that of PLLA/MWCNT, which indicates that the composite made with the PLLA-g-MWCNTs was more thermally stable than the composite made with the MWCNTs.

[1]  R. Jeng,et al.  Carbon black-containing interpenetrating polymer networks based on unsaturated polyester/epoxyII. Thermal degradation behavior and kinetic analysis , 2002 .

[2]  A. Bhattacharyya,et al.  Morphology and electrical resistivity of melt mixed blends of polyethylene and carbon nanotube filled polycarbonate , 2003 .

[3]  Milo S. P. Shaffer,et al.  Development of a dispersion process for carbon nanotubes in an epoxy matrix and the resulting electrical properties , 1999 .

[4]  Kaushal Rege,et al.  Enzyme-Polymer-Single Walled Carbon Nanotube Composites as Biocatalytic Films , 2003 .

[5]  Bin Zhao,et al.  Continuous spinning of a single-walled carbon nanotube-nylon composite fiber. , 2005, Journal of the American Chemical Society.

[6]  P. Ajayan.  Nanotubes from Carbon. , 1999, Chemical reviews.

[7]  P. Budrugeac.  The evaluation of the non-isothermal kinetic parameters of the thermal and thermo-oxidative degradation of polymers and polymeric materials: its use and abuse , 2000 .

[8]  D. Yan,et al.  Functionalization of multiwalled carbon nanotubes by atom transfer radical polymerization and defunctionalization of the products , 2004 .

[9]  Paul Calvert,et al.  Nanotube composites: A recipe for strength , 1999, Nature.

[10]  Krishan K. Chawla,et al.  Composite Materials: Science and Engineering , 1987 .

[11]  T. Ozawa.  A New Method of Analyzing Thermogravimetric Data , 1965 .

[12]  Joseph H. Flynn,et al.  A quick, direct method for the determination of activation energy from thermogravimetric data , 1966 .

[13]  H. Choi,et al.  Nanofibrous Membranes Prepared by Multiwalled Carbon Nanotube/Poly(methyl methacrylate) Composites , 2004 .

[14]  Anil N. Netravali,et al.  Interfacial and mechanical properties of environment-friendly “green” composites made from pineapple fibers and poly(hydroxybutyrate-co-valerate) resin , 1999 .

[15]  G. Arbuckle,et al.  A Comprehensive Analysis of the Thermal Elimination Reaction in a Poly(p-phenylene vinylene) Precursor , 1999 .