Fatigue Reliability of Maintained Welded Joints in the Side Shell of Tankers

A formulation is presented for the assessment of the reliability of a local ship hull structure regarding fatigue failure. The potential cracks are considered to occur in the side shell, in the connections between longitudinal stiffeners and transverse web frame. The analysis is performed for T-shaped stiffeners. The model accounts for the crack growth process applying linear elastic fracture mechanics. The long-term stress range acting on the elements is defined as a function of the local transverse pressure of internal cargo and outside water, combined with the stresses resulting from the longitudinal bending of the hull. The global hull loading is a combination of horizontal and vertical bending moments. The present paper analyzes the importance of including the transverse pressure loading for the process of the crack growth and also the distribution of the net section area of midship and location of stiffeners. The formulation has been applied to a tanker. The fatigue reliability is predicted by a time variant formulation and the effects of maintenance actions in updating the reliability assessment are shown.

[1]  Steven R. Winterstein,et al.  FATIGUE DAMAGE IN THE SIDE SHELLS OF SHIPS , 1995 .

[2]  C. Guedes Soares,et al.  Fatigue reliability of the ship hull girder , 1996 .

[3]  O. Ditlevsen.  Generalized Second Moment Reliability Index , 1979 .

[4]  J. N. Yang,et al.  Reliability Analysis of Aircraft Structures under Random Loading and Periodic Inspection , 1974 .

[5]  Ross B. Corotis,et al.  First Passage of Nonstationary Random Processes , 1972 .

[6]  H Paetzold,et al.  APPLICATION OF THE CYCLIC STRAIN APPROACH TO THE FATIGUE FAILURE OF SHIP STRUCTURAL DETAILS , 1987 .

[7]  P. C. Paris,et al.  A Critical Analysis of Crack Propagation Laws , 1963 .

[8]  C. Guedes Soares,et al.  Fatigue reliability of the ship hull girder accounting for inspection and repair , 1996 .

[9]  A. Naess.  Technical Note: On a rational approach to extreme value analysis , 1984 .

[10]  Ma,et al.  A REPAIR MANAGEMENT SYSTEM FOR FATIGUE CRACKS IN SHIPS , 1995 .

[11]  Espen H. Cramer,et al.  Fatigue assessment of ship structures , 1995 .

[12]  P. Packman,et al.  DEFINITION OF FATIGUE CRACKS THROUGH NONDESTRUCTIVE TESTING , 1969 .

[13]  Torgeir Moan,et al.  Model uncertainty in the long-term distribution of wave-induced bending moments for fatigue design of ship structures , 1991 .

[14]  Robert G. Bea.  Evaluation of alternative marine structural integrity programs , 1994 .

[15]  Henrik O. Madsen,et al.  Load Combinations in Codified Structural Design , 1980 .

[16]  Elmer E Lewis,et al.  Introduction To Reliability Engineering , 1987 .