Low temperature sintering of Hf0.95Nb0.05B2-based ceramics with submicron-scaled grains and enhanced mechanical properties

[1]  R. M. Rocha,et al.  Microstructure and mechanical properties of (Zr,Ti)B2–SiC composites obtained by pressureless sintering of ZrB2–SiC–TiO2 powder mixtures , 2023, Ceramics International.

[2]  Shikuan Sun,et al.  Effects of group-VB transition metals diborides substitution on HfB2-based ceramics , 2022, Journal of the European Ceramic Society.

[3]  K. Edalati,et al.  Microstructure and defect effects on strength and hydrogen embrittlement of high-entropy alloy CrMnFeCoNi processed by high-pressure torsion , 2022, Materials Science and Engineering: A.

[4]  Weijia Luo,et al.  Ceramic‐based dielectric metamaterials , 2022, Interdisciplinary Materials.

[5]  K. Edalati,et al.  Microstructure and microhardness of dual-phase high-entropy alloy by high-pressure torsion: Twins and stacking faults in FCC and dislocations in BCC , 2021, Journal of Alloys and Compounds.

[6]  Yanchun Zhou,et al.  High-entropy ceramics: Present status, challenges, and a look forward , 2021, Journal of Advanced Ceramics.

[7]  Hyoung-Seop Kim,et al.  Unusual strain-induced martensite and absence of conventional grain refinement in twinning induced plasticity high-entropy alloy processed by high-pressure torsion , 2020 .

[8]  Yan Peng,et al.  High pressure induced ultra-hard twinned lath martensite in binary Fe-15wt.%Cr alloy , 2020 .

[9]  A. Mukhopadhyay,et al.  Review on ultra-high temperature boride ceramics , 2020, Progress in Materials Science.

[10]  Weiming Guo,et al.  Effects of TaB 2 and TiB 2 on the grain growth behavior and kinetics of HfB 2 ceramics during pressureless sintering , 2020 .

[11]  Weiming Guo,et al.  Selection principle of the synthetic route for fabrication of HfB 2 and HfB 2 ‐SiC ceramics , 2019, Journal of the American Ceramic Society.

[12]  Yaojun Lin,et al.  Lomer-Cottrell locks with multiple stair-rod dislocations in a nanostructured Al alloy processed by severe plastic deformation , 2019, Materials Science and Engineering: A.

[13]  Xuejian Liu,et al.  Pressurelessly densified (Zr,Hf)B2-SiC ceramics by co-doping hafnium-boron carbides , 2017 .

[14]  A. V. Lanin,et al.  Ultra-High-Temperature Ceramics Based on HfB2 – 30% SiC: Production and Basic Properties , 2017, Refractories and Industrial Ceramics.

[15]  E. Ayas,et al.  In-situ synthesis and densification of HfB2 ceramics by the spark plasma sintering technique , 2017 .

[16]  Guo‐Jun Zhang,et al.  Effect of HfC and SiC on microstructure and mechanical properties of HfB2-based ceramics , 2016 .

[17]  Yucheng Wang,et al.  Sintering boron carbide ceramics without grain growth by plastic deformation as the dominant densification mechanism , 2015, Scientific Reports.

[18]  Zhanjun Wu,et al.  Fabrication and properties of HfB2 ceramics based on micron and submicron HfB2 powders synthesized via carbo/borothermal reduction of HfO2 with B4C and carbon , 2015 .

[19]  Bala Vaidhyanathan,et al.  UHTC composites for hypersonic applications , 2014 .

[20]  T. Langdon,et al.  Processing a twinning-induced plasticity steel by high-pressure torsion , 2012 .

[21]  Guo‐Jun Zhang,et al.  Synthesis of submicrometer HfB2 powder and its densification , 2012 .

[22]  Y. Le Godec,et al.  Creation of Nanostuctures by Extreme Conditions: High‐Pressure Synthesis of Ultrahard Nanocrystalline Cubic Boron Nitride , 2012, Advanced materials.

[23]  N. Gao,et al.  The influence of stacking fault energy on the mechanical properties of nanostructured Cu and Cu-Al alloys processed by high-pressure torsion , 2011 .

[24]  Guo‐Jun Zhang,et al.  Hot Pressed HfB2 and HfB2–20 vol%SiC Ceramics Based on HfB2 Powder Synthesized by Borothermal Reduction of HfO2* , 2010 .

[25]  Guo‐Jun Zhang,et al.  Synthesis of monodispersed fine hafnium diboride powders using carbo/borothermal reduction of hafnium dioxide , 2008 .

[26]  M. Nygren,et al.  Densification and Mechanical Behavior of HfC and HfB2 Fabricated by Spark Plasma Sintering , 2008 .

[27]  N. Padture,et al.  Improved processing and oxidation-resistance of ZrB2 ultra-high temperature ceramics containing SiC nanodispersoids , 2007 .

[28]  William G. Fahrenholtz,et al.  Refractory Diborides of Zirconium and Hafnium , 2007 .

[29]  J. Zaykoski,et al.  Oxidation-based materials selection for 2000°C + hypersonic aerosurfaces: Theoretical considerations and historical experience , 2004 .

[30]  D. Van Wie,et al.  The hypersonic environment: Required operating conditions and design challenges , 2004 .

[31]  Mark M. Opeka,et al.  Mechanical, Thermal, and Oxidation Properties of Refractory Hafnium and zirconium Compounds , 1999 .

[32]  Wei‐Ming Guo,et al.  Densification, microstructure, and mechanical properties of V-substituted HfB2-based ceramics , 2021 .

[33]  J. Zou,et al.  Densification mechanism and microstructure characteristics of nano- and micro- crystalline alumina by high-pressure and low temperature sintering , 2021, Journal of the European Ceramic Society.