Synergistic effect of natural rubber for imparting hydrophobicity in nanocellulose aerogel through one-pot synthesis and its application in oil/organic solvent sorption

[1]  A. Adeniyi,et al.  Adsorption of crude oil from aqueous solution: A review , 2022, Journal of Water Process Engineering.

[2]  Weiyao Zhu,et al.  Hydrophobic polyacrylonitrile/pitch electrospun nanofibers for oil spill cleanup: Fabrication, optimization, and kinetic investigations , 2022, Journal of Water Process Engineering.

[3]  T. Nurtono,et al.  Fabrication of Hydrophobic Cellulose Aerogels from Renewable Biomass Coir Fibers for Oil Spillage Clean-Up , 2022, Journal of Polymers and the Environment.

[4]  G. Liao,et al.  Fabrication of multifunctional biomass-based aerogel with 3D hierarchical porous structure from waste reed for the synergetic adsorption of dyes and heavy metal ions , 2022, Chemical Engineering Journal.

[5]  P. Maji,et al.  Mechanically durable green aerogel composite based on agricultural lignocellulosic residue for organic liquids/oil sorption. , 2022, Marine pollution bulletin.

[6]  Wei Li,et al.  Green approach to facilely design hydrophobic aerogel directly from bagasse , 2021 .

[7]  R. Doong,et al.  Biomass–derived cellulose nanofibrils membrane from rice straw as sustainable separator for high performance supercapacitor , 2021 .

[8]  A. Phan,et al.  Synthesis, Characteristics, Oil Adsorption, and Thermal Insulation Performance of Cellulosic Aerogel Derived from Water Hyacinth , 2021, ACS omega.

[9]  Ke-fu Chen,et al.  Mechanically Flexible Carbon Aerogel with Wavy Layers and Springboard Elastic Supporting Structure for Selective Oil/Organic Solvent Recovery. , 2021, ACS applied materials & interfaces.

[10]  Ke-fu Chen,et al.  Bottom‐Up Ecofriendly Strategy for Construction of Sustainable Bacterial Cellulose Bioaerogel with Multifunctional Properties , 2021, Advanced Materials Interfaces.

[11]  Ke-fu Chen,et al.  Isolation and rheological characterization of cellulose nanofibrils (CNFs) produced by microfluidic homogenization, ball-milling, grinding and refining , 2021, Cellulose.

[12]  P. Maji,et al.  Isolation of cellulose nanocrystals from different waste bio-mass collating their liquid crystal ordering with morphological exploration. , 2021, International journal of biological macromolecules.

[13]  M. Phisalaphong,et al.  Alginate as Dispersing Agent for Compounding Natural Rubber with High Loading Microfibrillated Cellulose , 2021, Polymers.

[14]  Ke-fu Chen,et al.  Cellulose nanofibrils (CNFs) produced by different mechanical methods to improve mechanical properties of recycled paper. , 2021, Carbohydrate polymers.

[15]  B. Noroozi,et al.  Rice straw agri-waste for water pollutant adsorption: Relevant mesoporous super hydrophobic cellulose aerogel. , 2021, Carbohydrate polymers.

[16]  S. Shi,et al.  Bioinspired interface engineering of soybean meal-based adhesive incorporated with biomineralized cellulose nanofibrils and a functional aminoclay , 2021 .

[17]  Lei Zhou,et al.  Fabrication of foam-like oil sorbent from polylactic acid and Calotropis gigantea fiber for effective oil absorption , 2021 .

[18]  Archita Sharma,et al.  Biofuel from rice straw , 2020 .

[19]  Yijun Jiang,et al.  Fire retardant cellulose aerogel with improved strength and hydrophobic surface by one‐pot method , 2020 .

[20]  Ke-fu Chen,et al.  Scalable and Robust Bacterial Cellulose Carbon Aerogels as Reusable Absorbents for High-Efficiency Oil/Water Separation. , 2020, ACS applied bio materials.

[21]  P. Tekasakul,et al.  Emission factors of ultrafine particulate matter (PM<0.1 μm) and particle-bound polycyclic aromatic hydrocarbons from biomass combustion for source apportionment. , 2020, Chemosphere.

[22]  Xueyuan Wang,et al.  Modification of Natural Rubber Latex by Graft Copolymerization of 2-Ethylhexyl Acrylate and Methacrylic Acid , 2020 .

[23]  T. Mekonnen,et al.  Reinforcement of rubber nanocomposite thin sheets by percolation of pristine cellulose nanocrystals. , 2020, International journal of biological macromolecules.

[24]  Emmanuel O. Ogunsona,et al.  Synergistic Cross-linking and Reinforcing Enhancement of Rubber Latex with Cellulose Nanocrystals for Glove Applications , 2020 .

[25]  Le Xie,et al.  Lightweight, High-Strength, and Anisotropic Structure Composite Aerogel Based on Hydroxyapatite Nanocrystal and Chitosan with Thermal Insulation and Flame Retardant Properties , 2020 .

[26]  T. Mekonnen,et al.  Investigation of the co-coagulation of natural rubber latex and cellulose nanocrystals aqueous dispersion , 2019 .

[27]  Chaodi Xu,et al.  Elastic Aerogels of Cellulose Nanofibers@Metal–Organic Frameworks for Thermal Insulation and Fire Retardancy , 2019, Nano-Micro Letters.

[28]  B. D. Mattos,et al.  Nanocellulose/bioactive glass cryogels as scaffolds for bone regeneration. , 2019, Nanoscale.

[29]  Jianzhang Li,et al.  Bioinspired interface engineering of gelatin/cellulose nanofibrils nanocomposites with high mechanical performance and antibacterial properties for active packaging , 2019, Composites Part B: Engineering.

[30]  Tao Zhang,et al.  Sustainable, Flexible, and Superhydrophobic Functionalized Cellulose Aerogel for Selective and Versatile Oil/Water Separation , 2019, ACS Sustainable Chemistry & Engineering.

[31]  Y. Mortazavi,et al.  A functionalized nano-structured cellulosic sorbent aerogel for oil spill cleanup: Synthesis and characterization. , 2019, Journal of hazardous materials.

[32]  Peng Yang,et al.  An indole-based aerogel for enhanced removal of heavy metals from water via the synergistic effects of complexation and cation–π interactions , 2019, Journal of Materials Chemistry A.

[33]  S. Riffat,et al.  Thermal conductivity, structure and mechanical properties of konjac glucomannan/starch based aerogel strengthened by wheat straw. , 2018, Carbohydrate polymers.

[34]  T. Budtova,et al.  Thermal conductivity/structure correlations in thermal super-insulating pectin aerogels. , 2018, Carbohydrate polymers.

[35]  M. Mariano,et al.  Microstructural characterization of nanocellulose foams prepared in the presence of cationic surfactants. , 2018, Carbohydrate polymers.

[36]  L. Mattoso,et al.  High-Pressure Microfluidization as a Green Tool for Optimizing the Mechanical Performance of All-Cellulose Composites , 2018, ACS Sustainable Chemistry & Engineering.

[37]  Gustav Nyström,et al.  Biopolymer Aerogels and Foams: Chemistry, Properties, and Applications. , 2018, Angewandte Chemie.

[38]  Hongbing Lu,et al.  Scalable, hydrophobic and highly-stretchable poly(isocyanurate–urethane) aerogels , 2018, RSC advances.

[39]  Wentao Gan,et al.  Mussel Adhesive-Inspired Design of Superhydrophobic Nanofibrillated Cellulose Aerogels for Oil/Water Separation , 2018, ACS Sustainable Chemistry & Engineering.

[40]  Suwadee Kongparakul,et al.  Fabrication and evaluation of nanocellulose sponge for oil/water separation. , 2018, Carbohydrate polymers.

[41]  S. V. D. Bosch,et al.  Chemicals from lignin: an interplay of lignocellulose fractionation, depolymerisation, and upgrading. , 2018, Chemical Society reviews.

[42]  Yanchan Wei,et al.  A review on characterization of molecular structure of natural rubber , 2017 .

[43]  T. Budtova,et al.  Starch Aerogels: A Member of the Family of Thermal Superinsulating Materials. , 2017, Biomacromolecules.

[44]  A. Dufresne,et al.  A novel interpenetrating polymer network of natural rubber/regenerated cellulose made by simple co-precipitation , 2017 .

[45]  N. Phan-Thien,et al.  Cotton aerogels and cotton-cellulose aerogels from environmental waste for oil spillage cleanup , 2017 .

[46]  A. Dufresne,et al.  Reinforcement of Natural Rubber: The Use of in Situ Regenerated Cellulose from Alkaline–Urea–Aqueous System , 2017 .

[47]  L. Bergström,et al.  Nanocellulose-based foams and aerogels: processing, properties, and applications , 2017 .

[48]  Jin Ge,et al.  Advanced Sorbents for Oil‐Spill Cleanup: Recent Advances and Future Perspectives , 2016, Advanced materials.

[49]  Liu Jin,et al.  Mechanical behavior and size effect of moderate high-strength RC columns under monotonic and cyclic axial compression , 2016 .

[50]  Sabu Thomas,et al.  Nanocelluloses from jute fibers and their nanocomposites with natural rubber: Preparation and characterization. , 2015, International journal of biological macromolecules.

[51]  Jérôme Sainte-Beuve,et al.  Investigating natural rubber composition with Fourier Transform Infrared (FT-IR) spectroscopy: A rapid and non-destructive method to determine both protein and lipid contents simultaneously , 2015 .

[52]  Zhenyou Li,et al.  Surface modification of bacterial cellulose aerogels' web-like skeleton for oil/water separation. , 2015, ACS applied materials & interfaces.

[53]  Abdullah Zawawi Awang,et al.  Steel strap confined high strength concrete under uniaxial cyclic compression , 2014 .

[54]  Lina Zhang,et al.  Hydrophobic modification on surface of chitin sponges for highly effective separation of oil. , 2014, ACS applied materials & interfaces.

[55]  T. Mekonnen,et al.  Thermosetting Proteinaceous Plastics from Hydrolyzed Specified Risk Material , 2013 .

[56]  J. Duval,et al.  Shell structure of natural rubber particles: evidence of chemical stratification by electrokinetics and cryo-TEM. , 2013, Langmuir : the ACS journal of surfaces and colloids.

[57]  Sabu Thomas,et al.  Green nanocomposites of natural rubber/nanocellulose: Membrane transport, rheological and thermal degradation characterisations , 2013 .

[58]  S. Deville.  Ice-templating, freeze casting: Beyond materials processing , 2013 .

[59]  G. S. Vijaya Raghavan,et al.  Feedstocks, logistics and pre-treatment processes for sustainable lignocellulosic biorefineries: A comprehensive review , 2013 .

[60]  Z. Dang,et al.  Application of cellulase for the modification of corn stalk: leading to oil sorption. , 2013, Bioresource technology.

[61]  R. Ruoff,et al.  Spongy Graphene as a Highly Efficient and Recyclable Sorbent for Oils and Organic Solvents , 2012 .

[62]  Sabu Thomas,et al.  Crosslinked natural rubber nanocomposites reinforced with cellulose whiskers isolated from bamboo waste: Processing and mechanical/thermal properties , 2012 .

[63]  P. Boonme,et al.  Formulations of Natural Rubber Latex as Film Former for Pharmaceutical Coating , 2012 .

[64]  P. Boonme,et al.  Characterization of Natural Rubber Latex Film Containing Various Enhancers , 2012 .

[65]  Anita Plazinska,et al.  Theoretical models of sorption kinetics including a surface reaction mechanism: a review. , 2009, Advances in colloid and interface science.

[66]  Yasuyuki Tanaka,et al.  Recent Advances in Structural Characterization of Natural Rubber , 2009 .

[67]  A. Barth.  Infrared spectroscopy of proteins. , 2007, Biochimica et biophysica acta.

[68]  N. Modirshahla,et al.  Kinetic study on photocatalytic degradation of C.I. Acid Yellow 23 by ZnO photocatalyst. , 2006, Journal of hazardous materials.

[69]  Lay-Theng Lee,et al.  Skim and cream natural rubber particles: colloidal properties, coalescence and film formation. , 2003, Journal of colloid and interface science.

[70]  M. C. Wilkinson,et al.  An overview of polymer latex film formation and properties. , 2000, Advances in colloid and interface science.