Abstract The increasing amount of telematic and other electronic systems in the modern motor vehicle demands higher performance and reliability in ever decreasing space. Over many years, connector technology has advanced but is still regarded as the weak link in the reliability chain. Fretting corrosion is thought to be the main failure mechanism causing intermittent high contact resistance. A low-frequency fretting apparatus is used in this study to induce fretting corrosion on contact samples. Low frequency is used to simulate the effect caused by different thermal expansion of connector components. Powering the contact interface under these fretting conditions delays the onset of high contact resistance. Joule heating is expected to accelerate surface oxidation, but electrical breakdown of films dominated at the levels studied (2 A, 12 V open circuit). Lubricating the interface also improves performance which is shown to be due to at least three contact enhancement mechanisms: wear reduction, oxidation retardation and improved debris dispersal.
[1]
M. Antler.
Tribological Properties of Gold for Electric Contacts
,
1973
.
[2]
M. Antler,et al.
Electrical effects of fretting connector contact materials: A review
,
1985
.
[3]
D.W.M. Williams.
The effect of test environment on the creep of base metal surface films over precious metal inlays
,
1988
.
[4]
J. Greenwood,et al.
The influence of dust particles on the contact of solids
,
1956,
Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.
[5]
Paul G. Slade,et al.
Electrical contacts : principles and applications
,
1999
.
[6]
M. Antler,et al.
Wear of gold electrodeposits: Effect of substrate and of nickel underplate
,
1979,
The Bell System Technical Journal.
[7]
Morton Antler,et al.
Effect of lubricants on frictional polymerization of palladium electrical contacts
,
1983
.