Probing the effect of abrasive wear on the grinding performance of rail grinding stones
暂无分享,去创建一个
[1] Tengfei Ma,et al. Microscopic contact pressure and material removal modeling in rail grinding using abrasive belt , 2021 .
[2] Qi-yue Liu,et al. Effects of abrasive material and hardness of grinding wheel on rail grinding behaviors , 2020, Wear.
[3] Minhao Zhu,et al. Probing the effect of grinding-heat on material removal mechanism of rail grinding , 2020 .
[4] Guijian Xiao,et al. Effects research on theoretical-modelling based suppression of the contact flutter in blisk belt grinding , 2020 .
[5] Minhao Zhu,et al. Probing the effect of abrasive grit size on rail grinding behaviors , 2020 .
[6] Qing Miao,et al. Tool wear behavior of vitrified microcrystalline alumina wheels in creep feed profile grinding of turbine blade root of single crystal nickel-based superalloy , 2020 .
[7] Wen-jian Wang,et al. Experimental investigation on material removal mechanism during rail grinding at different forward speeds , 2020, Tribology International.
[8] J. Guo,et al. Modelling and simulation of the grinding force in rail grinding that considers the swing angle of the grinding stone , 2019, Tribology International.
[9] J. Guo,et al. Influence of grinding pressure on removal behaviours of rail material , 2019, Tribology International.
[10] S. Agarwal. On the mechanism and mechanics of wheel loading in grinding , 2019, Journal of Manufacturing Processes.
[11] Jiu-hua Xu,et al. Comparative investigation on wear behavior of brown alumina and microcrystalline alumina abrasive wheels during creep feed grinding of different nickel-based superalloys , 2019, Wear.
[12] Liyun Dou,et al. Study on wear characteristics of brazed diamond sheet for rail’s composite grinding wheel under different pressures , 2019, Wear.
[13] Jianyong Li,et al. Investigation on wear modes and mechanisms of abrasive belts in grinding of U71Mn steel , 2018, The International Journal of Advanced Manufacturing Technology.
[14] Tianyu Yu,et al. Grinding of Ti2AlNb intermetallics using silicon carbide and alumina abrasive wheels: Tool surface topology effect on grinding force and ground surface quality , 2018, Precision Engineering.
[15] Z. Cai,et al. Influence of granularity of grinding stone on grinding force and material removal in the rail grinding process , 2018, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.
[16] W. J. Wang,et al. Influence of grinding parameters on surface temperature and burn behaviors of grinding rail , 2018, Tribology International.
[17] José Antonio Sánchez,et al. On the development and evolution of wear flats in microcrystalline sintered alumina grinding wheels , 2018 .
[18] Konrad Wegener,et al. A new grinding strategy to improve the acoustic properties of railway tracks , 2018 .
[19] Su Honghua,et al. Compressive Strength and Interface Microstructure of PCBN Grains Brazed with High-Frequency Induction Heating Method , 2017 .
[20] Søren Fæster,et al. Surface crack formation on rails at grinding induced martensite white etching layers , 2017 .
[21] M. Steenbergen. Rolling contact fatigue: Spalling versus transverse fracture of rails , 2017 .
[22] Yucan Fu,et al. Compressive Strength and Interface Microstructure of PCBN Grains Brazed with High-Frequency Induction Heating Method , 2017, Acta Metallurgica Sinica (English Letters).
[23] N. Fan,et al. Experimental investigation on tribological behavior of several polymer materials under reciprocating sliding and fretting wear conditions , 2016 .
[24] Yan Zhou,et al. Tribo-chemical behavior of eutectoid steel during rolling contact friction , 2016 .
[25] E. Uhlmann,et al. Influence of rail grinding process parameters on rail surface roughness and surface layer hardness , 2016 .
[26] Haiyue Yu,et al. Study on wear of the grinding wheel with an abrasive phyllotactic pattern , 2016 .
[27] Michaël J.M.M. Steenbergen,et al. Rolling contact fatigue in relation to rail grinding , 2016 .
[28] Ru Lin Peng,et al. Surface integrity of 2304 duplex stainless steel after different grinding operations , 2016 .
[29] F. Jiao,et al. Chip formation and its effects on cutting force, tool temperature, tool stress, and cutting edge wear in high- and ultra-high-speed milling , 2016 .
[30] W. Kapłonek,et al. The effect of wear phenomena of grinding wheels with sol-gel alumina on chip formation during internal cylindrical plunge grinding of 100Cr6 steel , 2016 .
[31] I. Pombo,et al. Role of frozen lubricant film on tribological behaviour and wear mechanisms in grinding , 2016 .
[32] Minhao Zhu,et al. Analysis on the effects of rotational speed of grinding stone on removal behavior of rail material , 2015 .
[33] P. Sutowski,et al. Analysis of aluminum oxynitride AlON (Abral®) abrasive grains during the brittle fracture process using stress-wave emission techniques , 2015 .
[34] Alejandro Toro,et al. Correlations between wear mechanisms and rail grinding operations in a commercial railroad , 2015 .
[35] Suping Li,et al. Comparing the influence of different kinds of zirconia on properties and microstructure of Al2O3 ceramics , 2016 .
[36] Krzysztof Nadolny,et al. State of the art in production, properties and applications of the microcrystalline sintered corundum abrasive grains , 2014 .
[37] Guoqing Chen,et al. Microstructure refinement of melt-grown Al2O3/YAG/ZrO2 eutectic composite by a new method: Melt superheating treatment , 2013 .
[38] Jiu-hua Xu,et al. Interface characteristics and fracture behavior of brazed polycrystalline CBN grains using Cu–Sn–Ti alloy , 2013 .
[39] Lijing Xie,et al. An investigation on wear mechanism of resin-bonded diamond wheel in Elliptical Ultrasonic Assisted Grinding (EUAG) of monocrystal sapphire , 2012 .
[40] Yoshikazu Kanematsu,et al. Influence of Type of Grinding Stone on Rail Grinding Efficiency , 2011 .
[41] K. Iwafuchi,et al. Effect of rail grinding on rolling contact fatigue in railway rail used in conventional line in Japan , 2008 .
[42] W. Rowe,et al. Handbook of Machining with Grinding Wheels , 2006 .
[43] F. Klocke,et al. Wear characteristics of second-phase-reinforced sol–gel corundum abrasives , 2006 .
[44] Fritz Klocke,et al. Micro-Analysis of the Contact Zone of Tribologically Loaded Second-Phase Reinforced Sol-Gel-Abrasives , 2002 .
[45] Yukio Nakata,et al. A probabilistic approach to sand particle crushing in the triaxial test , 1999 .
[46] Han Huang,et al. Weibull strength distributions and fracture characteristics of abrasive materials , 1995 .
[47] X. Hu,et al. An experimental investigation of the strengths of individual brown corundum abrasive grains , 1993 .
[48] V. Piispanen. Theory of Formation of Metal Chips , 1948 .