Design and Evaluation of 2-DOF Compliant Forceps With Force-Sensing Capability for Minimally Invasive Robot Surgery

In this paper, a novel concept of two-degree-of-freedom (2-DOF) compliant forceps is suggested for the measure of pulling and grasp forces at the tip of surgical instrument for minimally invasive surgery robot. For the design of the compliant forceps, the required compliance characteristics are first defined using a simple spring model with one linear and one torsional springs. This model may be directly realized as the compliant forceps. However, for the compact realization of the mechanism, we synthesize the spring model with two torsional springs that has equivalent compliance characteristics to the linear-torsional spring model. Then, each of the synthesized torsional springs is realized physically by means of a flexure hinge. From this design approach, direct measurement of the pulling and grasp forces is possible at the forceps, and measuring sensitivity can be adjusted in the synthesis process. The validity of the design is evaluated by finite element analysis. Further, from the measured values of bending strains of two flexure hinges, a method to compute the decoupled pulling and grasp forces is presented via the theory of screws. Finally, force-sensing performance of the proposed compliant forceps is verified from the experiments of the prototype using some weights and load cells.

[1]  John Kenneth Salisbury,et al.  The Intuitive/sup TM/ telesurgery system: overview and application , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[2]  Allison M. Okamura,et al.  Teleoperation with sensor/actuator asymmetry: task performance with partial force feedback , 2004, 12th International Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, 2004. HAPTICS '04. Proceedings..

[3]  Jaydev P. Desai,et al.  A Modular, Automated Laparoscopic Grasper with Three-Dimensional Force Measurement Capability , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[4]  J. Paros.  How to design flexure hinges , 1965 .

[5]  S. Payandeh,et al.  A micromachined piezoelectric tactile sensor for an endoscopic grasper-theory, fabrication and experiments , 2000, Journal of Microelectromechanical Systems.

[6]  Zexiang Li,et al.  Spatial stiffness realization with parallel springs using geometric parameters , 2002, IEEE Trans. Robotics Autom..

[7]  Ana Luisa Trejos,et al.  Force sensing in natural orifice transluminal endoscopic surgery , 2010, Surgical Endoscopy.

[8]  Man Bok Hong,et al.  Kinestatic Analysis of Nonsingular Lower Mobility Manipulators , 2009, IEEE Transactions on Robotics.

[9]  Blake Hannaford,et al.  The RAVEN: Design and Validation of a Telesurgery System , 2009, Int. J. Robotics Res..

[10]  J. Loncaric.  Passive realization of generalized springs , 1991, Proceedings of the 1991 IEEE International Symposium on Intelligent Control.

[11]  A. Castellanos,et al.  Force Feedback Plays a Significant Role in Minimally Invasive Surgery: Results and Analysis , 2005, Annals of surgery.

[12]  Ana Luisa Trejos,et al.  Force sensing and its application in minimally invasive surgery and therapy: A survey , 2010 .

[13]  Joseph Duffy,et al.  Statics and Kinematics with Applications to Robotics , 1996 .

[14]  Sami S. Antrazi,et al.  Analysis and implementation of a 6 DOF Steward platform-based force sensor for passive compliant robotic assembly , 1991, IEEE Proceedings of the SOUTHEASTCON '91.

[15]  T. Johansen,et al.  The Role of Tactile Feedback in Laparoscopic Surgery , 2006, Surgical laparoscopy, endoscopy & percutaneous techniques.

[16]  Charles Kim,et al.  A Building Block Approach to the Conceptual Synthesis of Compliant Mechanisms Utilizing Compliance and Stiffness Ellipsoids , 2008 .

[17]  Rodney G. Roberts,et al.  Passive compliance synthesis , 2002, Proceedings of the Thirty-Fourth Southeastern Symposium on System Theory (Cat. No.02EX540).

[18]  L.D. Seneviratne,et al.  State-of-the-Art in Force and Tactile Sensing for Minimally Invasive Surgery , 2008, IEEE Sensors Journal.

[19]  Bernhard Kübler,et al.  Sensorized and Actuated Instruments for Minimally Invasive Robotic Surgery , 2004 .

[20]  Mahdi Tavakoli,et al.  A force reflective master-slave system for minimally invasive surgery , 2003, Proceedings 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2003) (Cat. No.03CH37453).

[21]  G.S. Fischer,et al.  Ischemia and Force Sensing Surgical Instruments for Augmenting Available Surgeon Information , 2006, The First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006. BioRob 2006..

[22]  Christopher R. Wagner,et al.  The role of force feedback in surgery: analysis of blunt dissection , 2002, Proceedings 10th Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems. HAPTICS 2002.

[23]  Hongbin Liu,et al.  Miniature 3-Axis Distal Force Sensor for Minimally Invasive Surgical Palpation , 2012, IEEE/ASME Transactions on Mechatronics.

[24]  Ana Luisa Trejos,et al.  A Sensorized Instrument for Skills Assessment and Training in Minimally Invasive Surgery , 2009 .

[25]  K. H. Hunt,et al.  Kinematic geometry of mechanisms , 1978 .

[26]  Kotaro Tadano,et al.  Development of 4-DOFs forceps with force sensing using pneumatic servo system , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[27]  Won-Ho Shin,et al.  Design of a compact 5-DOF surgical robot of a spherical mechanism: CURES , 2008, 2008 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[28]  Joseph Duffy,et al.  In-Parallel Passive Compliant Coupler for Robot Force Control , 2000 .

[29]  Masakatsu G. Fujie,et al.  Integration of a Miniaturised Triaxial Force Sensor in a Minimally Invasive Surgical Tool , 2006, IEEE Transactions on Biomedical Engineering.

[30]  Jaydev P. Desai,et al.  On-site three dimensional force sensing capability in a laparoscopic grasper , 2004, Ind. Robot.

[31]  Rodney G. Roberts.  Minimal realization of a spatial stiffness matrix with simple springs connected in parallel , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[32]  Jaesoon Choi,et al.  An Implementation of Sensor-Based Force Feedback in a Compact Laparoscopic Surgery Robot , 2009, ASAIO journal.

[33]  Russell H. Taylor,et al.  A miniature microsurgical instrument tip force sensor for enhanced force feedback during robot-assisted manipulation , 2003, IEEE Trans. Robotics Autom..

[34]  Allison M. Okamura,et al.  Methods for haptic feedback in teleoperated robot-assisted surgery , 2004 .

[35]  J. M. Paros,et al.  Flexure Pivots to Replace Knife Edge and Ball Bearing , 1965 .

[36]  Shuguang Huang,et al.  The bounds and realization of spatial stiffnesses achieved with simple springs connected in parallel , 1998, IEEE Trans. Robotics Autom..

[37]  Jaydev P. Desai,et al.  Real-Time Haptic Feedback in Laparoscopic Tools for Use in Gastro-Intestinal Surgery , 2002, MICCAI.

[38]  S. Warisawa,et al.  Development of High Dexterity Minimally Invasive Surgical System with Augmented Force Feedback Capability , 2004, The First IEEE/RAS-EMBS International Conference on Biomedical Robotics and Biomechatronics, 2006. BioRob 2006..

[39]  Dong-Soo Kwon,et al.  Microsurgical telerobot system , 1998, Proceedings. 1998 IEEE/RSJ International Conference on Intelligent Robots and Systems. Innovations in Theory, Practice and Applications (Cat. No.98CH36190).

[40]  Yulun Wang,et al.  Robotic surgery - the transatlantic case , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[41]  Man Bok Hong,et al.  Screw System Approach to Physical Realization of Stiffness Matrix With Arbitrary Rank , 2009 .

[42]  N. Zemiti,et al.  Mechatronic Design of a New Robot for Force Control in Minimally Invasive Surgery , 2007, IEEE/ASME Transactions on Mechatronics.

[43]  J. M. Sackier,et al.  Robotically assisted laparoscopic surgery , 2008, Surgical Endoscopy.

[44]  Stuart T. Smith,et al.  Flexures: Elements of Elastic Mechanisms , 2000 .

[45]  Alois Knoll,et al.  The Must-Have in Robotic Heart Surgery: Haptic Feedback , 2008 .

[46]  Harvey Lipkin,et al.  SYNTHESIS OF STIFFNESSES BY SPRINGS , 1998 .

[47]  Dean Callaghan,et al.  Force Measurement Methods in Telerobotic Surgery: Implications for End-Effector Manufacture , 2008 .