A polymeric microfluidic valve employing a pH-responsive hydrogel microsphere as an actuating source

In this paper, we propose a new fabrication method for pH-responsive microfluidic valves. Conventionally, an in situ photopolymerization method has been employed to build the micro functional structure inside a microfluidic channel. Here, we suggest a new method that allows the mass production of a stimuli-responsive microsystem through the use of a pre-made microstructure as an actuating element, like the assembly of commercial products in a factory. We have massively fabricated pH-responsive microspheres that act as an actuating component through the use of PDMS-based microfluidic apparatus and an 'on the fly' photopolymerization method. By incorporation of this microsphere into the microvalve during the fabrication process, we have produced a pH-responsive microfluidic valve in a simple way. The operation and the function of the fabricated microvalve were evaluated through diverse experiments. The microvalve was successfully fabricated, and functioned well according to the pH change.

[1]  Yoshihiro Ito,et al.  pH-sensitive thin hydrogel microfabricated by photolithography , 1998 .

[2]  Timothy J. Shepodd,et al.  Mobile Flow Control Elements for High-Pressure Micro-Analytical Systems Fabricated Using in-Situ Polymerization , 2001 .

[3]  Olivier Français,et al.  Dynamic simulation of an electrostatic micropump with pull-in and hysteresis phenomena , 1998 .

[4]  Takashi Miyata,et al.  A reversibly antigen-responsive hydrogel , 1999, Nature.

[5]  Mario Di Giovanni,et al.  Flat and Corrugated Diaphragm Design Handbook , 1982 .

[6]  Toyoichi Tanaka,et al.  Phase transition in polymer gels induced by visible light , 1990, Nature.

[7]  Dominiek Reynaerts,et al.  The 'true' power of SMA micro-actuation , 2001 .

[8]  T. Okano,et al.  Totally Synthetic Polymer Gels Responding to External Glucose Concentration: Their Preparation and Application to On−Off Regulation of Insulin Release , 1998 .

[9]  Lars Stenmark,et al.  A large stroke, high force paraffin phase transition actuator , 2002 .

[10]  Eun Kyu Lee,et al.  Continuous fabrication of biocatalyst immobilized microparticles using photopolymerization and immiscible liquids in microfluidic systems. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[11]  Robin H. Liu,et al.  Fabrication and characterization of hydrogel-based microvalves , 2002 .

[12]  Robin H. Liu,et al.  Functional hydrogel structures for autonomous flow control inside microfluidic channels , 2000, Nature.

[13]  Iulia M Lazar,et al.  Multiple open-channel electroosmotic pumping system for microfluidic sample handling. , 2002, Analytical chemistry.

[14]  M. Plötner,et al.  Photopatterning of thermally sensitive hydrogels useful for microactuators , 1999 .

[15]  G. Whitesides,et al.  Soft lithography in biology and biochemistry. , 2001, Annual review of biomedical engineering.

[16]  D. Beebe,et al.  Flow control with hydrogels. , 2004, Advanced drug delivery reviews.

[17]  Toyoichi Tanaka,et al.  Collapse of Gels in an Electric Field , 1982, Science.

[18]  Sandra M. Troian,et al.  Patterning liquid flow on the microscopic scale , 1999, Nature.

[19]  Vincent Studer,et al.  A nanoliter-scale nucleic acid processor with parallel architecture , 2004, Nature Biotechnology.

[20]  Chang Liu,et al.  Architecture of a three-probe MEMS nanomanipulator with nanoscale end-effectors , 2003, Proceedings 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2003).

[21]  Darwin R. Reyes,et al.  Micro total analysis systems. 2. Analytical standard operations and applications. , 2002, Analytical chemistry.

[22]  Peter Enoksson,et al.  A Valve-Less Diffuser Micropump for Microfluidic Analytical Systems , 2001 .

[23]  David J Beebe,et al.  Hydrodynamic microfabrication via"on the fly" photopolymerization of microscale fibers and tubes. , 2004, Lab on a chip.

[24]  D. Beebe,et al.  Control mechanism of an organic self-regulating microfluidic system , 2003 .

[25]  Curtis W. Frank,et al.  A microfluidic actuator based on thermoresponsive hydrogels , 2003 .