Substrate Effect on the Optical Reflectance and Transmittance of Thin-Film Structures

A rigorous and consistent approach is demonstrated to develop a model of the 4M structure (the four-media structure of a film on a substrate of finite thickness). The general equations obtained for the reflectance and transmittance spectra of the 4M structure are simplified by employing a procedure of the so-called device averaging to reduce them to a succinct form convenient for processing of experimental spectra for the structures with a thick substrate. The newly derived equations are applied to two special cases: (i) an arbitrary film on highly absorbing substrates and (ii) a slightly absorbing film on transparent substrates. The reflectance and transmittance spectra represented in the simplified (with the device averaging) form have a practical application for determining the film thickness and optical constants from experimental spectra by using the known techniques.

[1]  Deposition of zirconium oxynitride films by reactive cathodic arc evaporation and investigation of physical properties , 2008 .

[2]  T. Takahashi,et al.  Effects of plasma exposure on structural and optical properties of TiO2 films deposited by off-axis target sputtering , 2002 .

[3]  Koji Takeuchi,et al.  Preparation of the TiO2 Thin Film Photocatalyst by the Dip-Coating Process , 1998 .

[4]  J. Gasiot,et al.  A simple method for the determination of the optical constants n, k and the thickness of a weakly absorbing thin film , 1976 .

[5]  Gong Zhang,et al.  Influence of annealing temperature on the properties of titanium oxide thin film , 2003 .

[6]  G. M. Rao,et al.  Effect of substrate temperature on the structural, optical and electrical properties of dc magnetron sputtered tantalum oxide films , 2008 .

[7]  Schwab S. Major,et al.  Polarized Light and Optical Measurement , 1972 .

[8]  Edward J. Wolfrum,et al.  Bactericidal mode of titanium dioxide photocatalysis , 2000 .

[9]  R. Swanepoel,et al.  Determining refractive index and thickness of thin films from wavelength measurements only , 1985 .

[10]  F. Abelès,et al.  Optical properties of metallic films , 1971 .

[11]  G. M. Rao,et al.  Tantalum oxide films prepared by unbalanced reactive magnetron sputtering , 1999 .

[12]  Anna Sytchkova,et al.  Measurement of optical constants of thin films by non conventional ellipsometry, photothermal deflection spectroscopy and plasmon resonance spectroscopy , 2008, Optical Systems Design.

[13]  N. Martin,et al.  Characterizations of titanium oxide films prepared by radio frequency magnetron sputtering , 1996 .

[14]  H. Fukuda,et al.  Structural and electrical properties of crystalline (1−x)Ta2O5−xTiO2 thin films fabricated by metalorganic decomposition , 2002 .

[15]  R. Swanepoel.  Determination of the thickness and optical constants of amorphous silicon , 1983 .

[16]  Nicholas Chako,et al.  Optics of thin films , 1960 .

[17]  Samuel Tolansky,et al.  Multiple-beam interferometry of surfaces and films , 1948 .

[18]  A. Fujishima,et al.  Photocatalytic Activity and Photo-Induced Wettability Conversion of TiO2 Thin Film Prepared by Sol-Gel Process on a Soda-Lime Glass , 2000 .

[19]  K. Geib,et al.  Effects of oxygen content on the optical properties of tantalum oxide films deposited by ion-beam sputtering. , 1985, Applied optics.

[20]  J. Hall,et al.  Optical Properties of Cadmium Sulfide and Zinc Sulfide from 0.6 Micron to 14 Microns , 1955 .

[21]  S. Tomlin.  More formulae relating to optical reflection and transmission by thin films , 1972 .

[22]  E. H. Linfoot.  Principles of Optics , 1961 .

[23]  Y. S. Chen,et al.  Refractive Indices of ZnO , ZnS , and Several Thin‐Film Insulators , 1968 .

[24]  R. Guidoin,et al.  Electrochemical and microstructural studies of tantalum and its oxide films for biomedical applications in endovascular surgery , 2002, Journal of materials science. Materials in medicine.

[25]  K. H. Jolliffee.  Optical properties of thin solid films , 1954 .