A simple current control strategy for four-leg direct Matrix converter

A four-leg Matrix converter is built based on conventional Matrix converter. It is required to provide a path for the zero-sequence load current when the added midline bridge connects the neutral point of load. In this paper, a model predictive control method for a four-leg matrix converter under unbalanced load condition is described. The predictive control method is based on the optimal selection among the valid switching states of the converter by evaluating a cost function. Compared with the conventional method, the predictive control method is simple to implement without coordination transformation and duty ratio calculation. To support the theoretical analysis, the feasibility and reliability of the proposed method are verified by simulation results.

[1]  Takahiro Uchino,et al.  Development of MCs and its Applications in Industry [Industry Forum] , 2011, IEEE Industrial Electronics Magazine.

[2]  Marco Rivera,et al.  A Simple Current Control Strategy for a Four-Leg Indirect Matrix Converter , 2015, IEEE Transactions on Power Electronics.

[3]  Ji Yan-chao.  Improvement of Matrix Converter's Topology and Study on It's Control Strategy Under Unbalance Load , 2008 .

[4]  Hong-Hee Lee,et al.  The control strategy for a four-leg indirect matrix converter with unbalanced load , 2011 .

[5]  P.W. Wheeler,et al.  A Utility Power Supply Based on a Four-Output Leg Matrix Converter , 2008, IEEE Transactions on Industry Applications.

[6]  Zhu Jian-lin.  Study of Closed loop Control based on Double Synchronous Rotating Frame for Two-stage Matrix Converter Under Unbalanced Load , 2006 .

[7]  P. Wheeler,et al.  The Application of Resonant Controllers to Four-Leg Matrix Converters Feeding Unbalanced or Nonlinear Loads , 2012, IEEE Transactions on Power Electronics.

[8]  José R. Rodríguez,et al.  Matrix converters: a technology review , 2002, IEEE Trans. Ind. Electron..

[9]  R. Kennel,et al.  Direct model predictive control - a new direct predictive control strategy for electrical drives , 2005, 2005 European Conference on Power Electronics and Applications.

[10]  Gui Wei-hua.  Research on Two-stage Four-leg Matrix Converter Based on Carrier Modulation Strategy , 2009 .

[11]  Stefan Müller,et al.  New time-discrete modulation scheme for matrix converters , 2005, IEEE Transactions on Industrial Electronics.

[12]  Pablo Lezana,et al.  Predictive control of three-phase inverter , 2004 .

[13]  Roberto Cárdenas,et al.  Experimental Validation of a Space-Vector-Modulation Algorithm for Four-Leg Matrix Converters , 2011, IEEE Transactions on Industrial Electronics.