Nanostructured zirconia–30 vol.% alumina composite coatings deposited by atmospheric plasma spraying

[1]  S. Semiatin,et al.  Thermal Conductivity of Plasma-Sprayed Monolithic and Multilayer Coatings of Alumina and Yttria-Stabilized Zirconia , 2004 .

[2]  S. Semiatin,et al.  Microstructure, texture, and thermal conductivity of single-layer and multilayer thermal barrier coatings of Y2O3-Stabilized ZrO2 and Al2O3 made by physical vapor deposition , 2004 .

[3]  A. Kobayashi,et al.  Adhesion characteristics of zirconia–alumina composite coatings by gas tunnel type plasma spraying , 2004 .

[4]  S. Chan,et al.  Microstructure-property modifications in plasma sprayed 20 wt.% yttria stabilized zirconia electrolyte by spark plasma sintering (SPS) technique , 2004 .

[5]  Christian Coddet,et al.  Improvement in wear resistance of plasma sprayed yttria stabilized zirconia coating using nanostructured powder , 2004 .

[6]  S. Chandra,et al.  Effect of substrate temperature on adhesion strength of plasma-sprayed nickel coatings , 2003 .

[7]  J. Gang,et al.  Nanostructures in thermal spray coatings , 2003 .

[8]  A. M. Limarga,et al.  Oxidation behavior of a plasma-sprayed functionally graded ZrO2/Al2O3 thermal barrier coating , 2002 .

[9]  N. Ghoniem,et al.  Plasma spraying of micro-composite thermal barrier coatings , 2002 .

[10]  C. Ding,et al.  Nanostructured zirconia coating prepared by atmospheric plasma spraying , 2002 .

[11]  M. Pasandideh-Fard,et al.  Splat shapes in a thermal spray coating process: Simulations and experiments , 2002 .

[12]  S. Sampath,et al.  Splat formation and microstructure development during plasma spraying: deposition temperature effects , 2001 .

[13]  G. Sandoval,et al.  Surface and catalytic properties of Al2O3–ZrO2 solid solutions prepared by sol–gel methods , 2000 .

[14]  H. Choi,et al.  Phase transformation and bond coat oxidation behavior of plasma-sprayed zirconia thermal barrier coating , 2000 .

[15]  M. Fukumoto,et al.  Flattening and solidification behavior of a metal droplet on a flat substrate surface held at various temperatures , 1999 .

[16]  G. Messing,et al.  Residual stresses in alumina–zirconia laminates , 1999 .

[17]  C. Berndt,et al.  Thermal spray processing of nanoscale materials—A conference report with extended abstract , 1998 .

[18]  C. Berndt,et al.  Preparation of nanophase materials by thermal spray processing of liquid precursors , 1997 .

[19]  Christopher C. Berndt,et al.  Concept of Functionally Graded Materials for Advanced Thermal Barrier Coating Applications , 1996 .

[20]  P. Fauchais,et al.  Influence of substrate roughness and temperature on the adhesion/cohesion of alumina coatings , 1996 .

[21]  A. Kobayashi.  Surface nitridation of titanium metal by means of a gas tunnel type plasma jet , 1996 .

[22]  Maurice Gell,et al.  Application opportunities for nanostructured materials and coatings , 1995 .

[23]  B. Kear,et al.  Chemical processing and applications for nanostructured materials , 1995 .

[24]  R Suryanarayanan,et al.  Plasma spraying : theory and applications , 1993 .

[25]  M. Harmer,et al.  Processing and microstructure development in Al2O3-SiC ‘nanocomposites’ , 1992 .

[26]  J. R. Brandon,et al.  Phase stability of zirconia-based thermal barrier coatings part II. Zirconia-ceria alloys , 1991 .

[27]  V. Jayaram,et al.  Characterization of Al2O3ZrO2 powders produced by electrohydrodynamic atomization , 1990 .

[28]  T. Masaki.  Mechanical properties of toughened ZrO2‐Y2O3 Ceramics , 1986 .

[29]  Arthur H. Heuer,et al.  Science and Technology of Zirconia , 1981 .

[30]  R. Mcpherson.  On the formation of thermally sprayed alumina coatings , 1980 .

[31]  H. G. Scott,et al.  Phase relationships in the zirconia-yttria system , 1975 .