Characterization of Changes to the Mechanical Properties of Arteries due to Cold Storage Using Nanoindentation Tests

Understanding the effect of cold storage on arterial tissues is essential in various clinical and experimental practices. Cold storage techniques could significantly affect the post-cryosurgical or post-cryopreservation mechanical behavior of arteries. Previously, arteries were considered homogenous and elastic and the changes in material properties due to cold storage were inconclusive. In this study, using a custom-made nanoindentation device, changes to the local viscoelastic properties of porcine thoracic aorta wall due to three common storage temperatures (+4, −20, and −80 °C) within 24 h, 48 h, 1 week, and 3 weeks were characterized. The changes to both elastic and relaxation behaviors were investigated considering the multilayer, heterogeneous nature of the aortic wall. The results showed that the average instantaneous Young’s modulus (E) of +4 °C storage samples decreased while their permanent average relaxation amplitude (G∞) increased and after 48 h these changes became significant (10 and 13% for E and G∞, respectively). Generally, in freezer storage, E increased and G∞ showed no significant change. In prolonged preservation (>1 week), the results of −20 °C showed significant increase in E (20% after 3 weeks) while this increase for −80 °C was not significant, making it a better choice for tissue cold storage applications.

[1]  I. N. Sneddon.  The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile , 1965 .

[2]  J Baulieux,et al.  Mechanical characteristics of fresh and frozen human descending thoracic aorta. , 1996, The Journal of surgical research.

[3]  Z. Krasiński,et al.  The mechanical properties of fresh and cryopreserved arterial homografts. , 2000, European journal of vascular and endovascular surgery : the official journal of the European Society for Vascular Surgery.

[4]  R. Ogden,et al.  A New Constitutive Framework for Arterial Wall Mechanics and a Comparative Study of Material Models , 2000 .

[5]  Y. Castier,et al.  Long-term results of cryopreserved arterial allograft reconstruction in infected prosthetic grafts and mycotic aneurysms of the abdominal aorta. , 2001, Journal of vascular surgery.

[6]  Mary C. Boyce,et al.  Durometer Hardness and the Stress-Strain Behavior of Elastomeric Materials , 2003 .

[7]  L. Lambert,et al.  Immunogenicity of decellularized cryopreserved allografts in pediatric cardiac surgery: comparison with standard cryopreserved allografts. , 2003, The Journal of thoracic and cardiovascular surgery.

[8]  L. Pruitt,et al.  Nanoindentation of soft hydrated materials for application to vascular tissues. , 2004, Journal of biomedical materials research. Part A.

[9]  J. Segalés,et al.  Cryopreservation alters antigenicity of allografts in a porcine model of transplant vasculopathy. , 2004, Transplantation proceedings.

[10]  Takao Furukawa,et al.  Residual stress and strain in the lamellar unit of the porcine aorta: experiment and analysis. , 2004, Journal of biomechanics.

[11]  G. Pascual,et al.  Restoring the endothelium of cryopreserved arterial grafts: co-culture of venous and arterial endothelial cells. , 2004, Cryobiology.

[12]  P. J. Prendergast,et al.  Elastic Behavior of Porcine Coronary Artery Tissue Under Uniaxial and Equibiaxial Tension , 2004, Annals of Biomedical Engineering.

[13]  V. Barocas,et al.  Effects of Freezing and Cryopreservation on the Mechanical Properties of Arteries , 2006, Annals of Biomedical Engineering.

[14]  Dehua Yang,et al.  Nanoindentation method for determining the initial contact and adhesion characteristics of soft polydimethylsiloxane , 2005 .

[15]  M. Konerding,et al.  Freezing without surrounding cryomedium preserves the endothelium and its function in human internal mammary arteries. , 2005, Cryobiology.

[16]  Gerhard Sommer,et al.  Determination of layer-specific mechanical properties of human coronary arteries with nonatherosclerotic intimal thickening and related constitutive modeling. , 2005, American journal of physiology. Heart and circulatory physiology.

[17]  L. Pruitt,et al.  Simulated soft tissue nanoindentation: A finite element study , 2005 .

[18]  Narayan Yoganandan,et al.  Mechanics of fresh, refrigerated, and frozen arterial tissue. , 2007, The Journal of surgical research.

[19]  Da‐Wen Sun,et al.  Experimental study and analysis of mechanical properties of frozen rabbit aorta by fracture mechanics approach. , 2008, Journal of biomechanics.

[20]  Charles A. Taylor,et al.  The three-dimensional micro- and nanostructure of the aortic medial lamellar unit measured using 3D confocal and electron microscopy imaging. , 2008, Matrix Biology.

[21]  Dalin Tang,et al.  An experimental study on the ultimate strength of the adventitia and media of human atherosclerotic carotid arteries in circumferential and axial directions. , 2009, Journal of biomechanics.

[22]  B. Derby,et al.  Nanoindentation of histological specimens: Mapping the elastic properties of soft tissues , 2009, Journal of materials research.

[23]  Jessica D. Kaufman,et al.  Surface detection errors cause overestimation of the modulus in nanoindentation on soft materials. , 2009, Journal of the mechanical behavior of biomedical materials.

[24]  P. Janmey,et al.  A simple indentation device for measuring micrometer-scale tissue stiffness , 2010, Journal of physics. Condensed matter : an Institute of Physics journal.

[25]  D. Ebenstein.  Nano-JKR force curve method overcomes challenges of surface detection and adhesion for nanoindentation of a compliant polymer in air and water , 2011 .

[26]  Yanhang Zhang,et al.  Changes in the mechanical and biochemical properties of aortic tissue due to cold storage. , 2011, The Journal of surgical research.

[27]  B. Derby,et al.  Localised micro-mechanical stiffening in the ageing aorta , 2011, Mechanisms of Ageing and Development.