Seismic performance evaluation of various passive damping systems in high and medium-rise buildings with hybrid structural system

The main aim of this manuscript is to bridge existing knowledge gaps by undertaking comprehensive investigation of several high and medium-rise structures in Iran with different damping devices embedded within cut outs of shear walls. To further extend understanding of damping devices embedded within cut outs of shear walls, these structures are treated under a variety of different earthquake excitations and the results are compared in order to capture their advantages in creating efficient damping systems. The research will address the needs of local industries. It aims to carry out a comprehensive investigation on seismic mitigation of high and medium-rise structures with different damping devices embedded within cut outs of shear walls at different locations across the height of each structure. Nonlinear finite element modeling approach has been used in the current study. Keywords: Passive Damping, Seismic, Hybrid Structural System, FEM

[1]  Billie F. Spencer,et al.  Controlling Buildings: A New Frontier in Feedback , 1998 .

[2]  Izuru Takewaki.  Building Control with Passive Dampers: Optimal Performance-based Design for Earthquakes , 2009 .

[3]  Anita Shukla,et al.  Optimal Use of Viscoelastic Dampers in Building Frames for Seismic Force , 1999 .

[4]  Tomaso Trombetti,et al.  ADDED VISCOUS DAMPERS IN SHEAR-TYPE STRUCTURES: THE EFFECTIVENESS OF MASS PROPORTIONAL DAMPING , 2004 .

[5]  T. T. Soong,et al.  Seismic Design of Viscoelastic Dampers for Structural Applications , 1992 .

[6]  R. S. Jangid,et al.  Seismic analysis of structures connected with friction dampers , 2006 .

[7]  F. Manouchehri Dana,et al.  Introduction of the most suitable parameter for selection of critical earthquake , 2005 .

[8]  T. T. Soong,et al.  Viscoelastic Dampers as Energy Dissipation Devices for Seismic Applications , 1993 .

[9]  Izuru Takewaki,et al.  Optimal damper placement for minimum transfer functions , 1997 .

[10]  Henk Nijmeijer,et al.  Energy dissipation of a friction damper , 2004 .

[11]  T. T. Soong,et al.  Optimal placement of energy dissipation devices for three-dimensional structures , 1997 .

[12]  R. Clough,et al.  Dynamics Of Structures , 1975 .

[13]  O. C. Zienkiewicz,et al.  The Finite Element Method for Solid and Structural Mechanics , 2013 .

[14]  Shirley J. Dyke,et al.  Next Generation Bench-mark Control Problems for Seismically Excited Buildings , 1999 .

[15]  Kohei Fujita,et al.  OPTIMIZATION IN DAMPER PLACEMENT FOR INTERSTORY-DRIFT CONTROL OF STRUCTURES , 2010 .

[16]  James K. Wight,et al.  Strengthening existing buildings for earthquake survival , 1989 .

[17]  Andre Filiatrault,et al.  Seismic Response Control of Buildings Using Friction Dampers , 1993 .

[18]  Ersin Aydin,et al.  Optimal damper distribution for seismic rehabilitation of planar building structures , 2007 .

[19]  T. Soong,et al.  MODELING OF VISCOELASTIC DAMPERS FOR STRUCTURAL ApPLICATIONS , 1995 .

[20]  Nelson Lam,et al.  SIMPLIFIED DISPLACEMENT DEMAND PREDICTION OF TALL ASYMMETRIC BUILDINGS SUBJECTED TO LONG-DISTANCE EARTHQUAKES , 2005 .

[21]  Károly Jármai,et al.  Optimum seismic design of a multi-storey steel frame , 2006 .

[22]  Ananth Ramaswamy,et al.  OPTIMUM DESIGN OF HYBRID MASS DAMPER SVSTEM FOR VIBRATION CONTROL OF MDOF STRUCTURES , 2000 .

[23]  David P. Thambiratnam,et al.  STUDY OF PASSIVE DAMPERS CONFIGURATIONS IN THE SEISMIC MITIGATION OF STRUCTURES , 2009 .

[24]  T. T. Soong,et al.  Passive Energy Dissipation Systems in Structural Engineering , 1997 .

[25]  Fu-Kuo Chang,et al.  Encyclopedia of structural health monitoring , 2009 .

[26]  G. D. Hahn,et al.  Effects of added-damper distribution on the seismic response of buildings , 1992 .

[27]  T. Soong,et al.  Effect of Ambient Temperature on Viscoelastically damped structure , 1992 .

[28]  Shirley J. Dyke,et al.  Benchmark problems in structural control: part I—Active Mass Driver system , 1998 .

[29]  Kazuhiko Kasai,et al.  Passive Control Systems for Seismic Damage Mitigation , 1998 .