Effects of coarse Al2CuLi phase on the hot deformation behavior of Al–Li alloy

[1]  Guoqun Zhao,et al.  Constitutive modeling, processing map establishment and microstructure analysis of spray deposited Al-Cu-Li alloy 2195 , 2019, Journal of Alloys and Compounds.

[2]  L. Zhen,et al.  Influence of Mg content on ageing precipitation behavior of Al-Cu-Li-x alloys , 2019, Materials Science and Engineering: A.

[3]  Wen You,et al.  Characteristic constitution model and microstructure of an Al-3.5Cu-1.5Li alloy subjected to thermal deformation , 2018, Materials Characterization.

[4]  Yong-bo Xu,et al.  Strengthening mechanisms, deformation behavior, and anisotropic mechanical properties of Al-Li alloys: A review , 2017, Journal of advanced research.

[5]  B. Xiao,et al.  Hot deformation mechanisms and microstructure evolution of SiCp/2014Al composite , 2017 .

[6]  R. Logé,et al.  Recrystallization behavior of multi-directionally forged over-aged and solution treated Al-Cu-Mg alloy during non-isothermal annealing , 2017 .

[7]  Qing Liu,et al.  Hot deformation behavior and microstructure of AA2195 alloy under plane strain compression , 2017 .

[8]  Jin-feng Li,et al.  Influence of Pre-deformation on Aging Precipitation Behavior of Three Al–Cu–Li Alloys , 2017, Acta Metallurgica Sinica (English Letters).

[9]  P. Prangnell,et al.  Quantification of the influence of increased pre-stretching on microstructure-strength relationships in the Al–Cu–Li alloy AA2195 , 2016 .

[10]  Jin-feng Li,et al.  Hot deformation behavior and microstructure evolution of 1460 Al–Li alloy , 2015 .

[11]  Jin-feng Li,et al.  Dynamic restoration mechanism and physically based constitutive model of 2050 Al–Li alloy during hot compression , 2015 .

[12]  Y. Nie,et al.  Hot deformation behavior of 2060 alloy , 2015 .

[13]  Xinyun Wang,et al.  A new dynamic recrystallisation model of an extruded Al-Cu-Li alloy during high-temperature deformation , 2015 .

[14]  Z. Yin,et al.  Characterization of hot deformation behavior of as-homogenized Al–Cu–Li–Sc–Zr alloy using processing maps , 2014 .

[15]  P. Prangnell,et al.  The effect of Mn and Zr dispersoid-forming additions on recrystallization resistance in Al–Cu–Li AA2198 sheet , 2014 .

[16]  A. Mikhaylovskaya,et al.  A high-strength aluminium-based alloy with advanced superplasticity , 2014 .

[17]  L. Schultz,et al.  Dynamic recrystallisation and precipitation behaviour of high strength and highly conducting Cu–Ag–Zr-alloys , 2014 .

[18]  T. Dorin,et al.  The influence of precipitation on plastic deformation of Al-Cu-Li alloys , 2013 .

[19]  A. Deschamps,et al.  The influence of Cu/Li ratio on precipitation in Al-Cu-Li-x alloys , 2013 .

[20]  Y. C. Lin,et al.  Hot deformation and processing map of a typical Al–Zn–Mg–Cu alloy , 2013 .

[21]  R. Rioja,et al.  The Evolution of Al-Li Base Products for Aerospace and Space Applications , 2012, Metallurgical and Materials Transactions A.

[22]  B. P. Kashyap,et al.  Processing map for hot working of spray formed and hot isostatically pressed Al–Li alloy (UL40) , 2009 .

[23]  Z. Nie,et al.  Hot deformation and processing maps of an Al–5.7 wt.%Mg alloy with erbium , 2009 .

[24]  Yi Han,et al.  Hot deformation behavior of 7150 aluminum alloy during compression at elevated temperature , 2009 .

[25]  Di Zhang,et al.  Microstructure evolution of near-α titanium alloys during thermomechanical processing , 2006 .

[26]  E. A. Starke,et al.  Progress in structural materials for aerospace systems , 2003 .

[27]  H. J. McQueen,et al.  Constitutive analysis in hot working , 2002 .

[28]  S. Ahzi,et al.  Statistical continuum theory for large plastic deformation of polycrystalline materials , 2001 .

[29]  S. Zwaag,et al.  Assessment of constitutive equations in modelling the hot deformability of some overaged Al-Mg-Si alloys with varying solute contents , 1999 .

[30]  R. Rioja,et al.  Fabrication methods to manufacture isotropic Al-Li alloys and products for space and aerospace applications , 1998 .

[31]  Y. V. R. K. Prasad,et al.  Processing maps for hot working of titanium alloys , 1998 .

[32]  Y. Prasad,et al.  Modelling of hot deformation for microstructural control , 1998 .

[33]  Yellapregeda Prasad V.R.K.,et al.  Hot Working Guide: A Compendium of Processing Maps , 1997 .

[34]  H. Mcqueen,et al.  Hot deformation mechanisms of a solution-treated Al-Li-Cu-Mg-Zr alloy , 1996 .

[35]  K. Jata,et al.  Isotropic Wrought Aluminum-Lithium Plate Development Technology , 1996 .

[36]  E. Cerri,et al.  Comparative hot workability of 7012 and 7075 alloys after different pretreatments , 1995 .

[37]  E. Lee,et al.  Effect of T1 precipitate on the anisotropy of AlLi alloy 2090 , 1993 .

[38]  R. Dorward.  Zirconium vs manganese-chromium for grain structure control in an Al-Cu-Li alloy , 1987 .

[39]  P. Gregson,et al.  Microstructural control of toughness in aluminium-lithium alloys , 1985 .

[40]  S. M. Doraivelu,et al.  Modeling of dynamic material behavior in hot deformation: Forging of Ti-6242 , 1984 .

[41]  F. J. Humphreys.  Local lattice rotations at second phase particles in deformed metals , 1979 .

[42]  F. J. Humphreys.  The nucleation of recrystallization at second phase particles in deformed aluminium , 1977 .

[43]  M. J. Luton,et al.  Recovery and recrystallization of carbon steel between intervals of hot working , 1975 .

[44]  A. Rollett,et al.  Hot Deformation and Dynamic Restoration , 2017 .

[45]  R. Wanhill,et al.  Mechanical Working of Aluminum–Lithium Alloys , 2014 .

[46]  S. Medina,et al.  General expression of the Zener-Hollomon parameter as a function of the chemical composition of low alloy and microalloyed steels , 1996 .

[47]  S. Suresh,et al.  Microscopic and macroscopic aspects of fracture in lithium-containing aluminum alloys , 1987 .

[48]  S. Chattopadhyay,et al.  Kinetics of pearlite spheroidisation during static annealing and during hot deformation , 1982 .

[49]  J. H. Hollomon,et al.  Effect of Strain Rate Upon Plastic Flow of Steel , 1944 .