Performance comparison of 10 kV#x2013;15 kV high voltage SiC modules and high voltage switch using series connected 1.7 kV LV SiC MOSFET devices

. The 10 kV to 15 kV SiC MOSFET and 15 kV SiC IGBT are state of the art high voltage (HV) devices designed by Cree Inc. These devices are expected to increase the power density of converters and are expected to replace 4.5 kV/6.5 kV Si IGBTs. However, these are not commercially available. On the other hand low voltage (LV) 1.7 kV SiC MOSFET is commercially available, and it is replacing existing 1.7 kV Si-IGBT and it can meet immediate need of medium or high voltage (MV or HV) converter applications with series connection of these devices and can replace existing 4.5 kV/6.5 kV Silicon (Si) IGBT. Therefore, 10 kV-15 kV SiC modules and series connected 1.7 kV SiC MOSFET will be competing with each other for MV and HV converter applications. Hence, to explore the capability of low voltage SiC devices for MV or HV applications, a HV switch (10 kV-15 kV) using the series connection of 1.7 kV/300 A SiC MOSFET modules has been investigated. For making HV switch using series connected 1.7 kV SiC MOSFET, a simple RC snubber method has been used for dynamic voltage sharing to offset the turn-off delays due to mismatch of device characteristics and gate signals. Experimental switching characterization with different values of RC snubbers has been carried out, and a methodology has been outlined to find the optimal RC snubber which gives minimum voltage sharing difference, snubber losses and total semiconductor losses. In addition, experimental switching characterization of 10 kV-15 kV SiC modules is presented. Furthermore, a performance comparison of HV 10 kV-15 kV SiC modules and HV switch using series connected 1.7 kV SiC MOSFETs is presented in this paper.

[1]  W. Mcmurray,et al.  Optimum Snubbers for Power Semiconductors , 1972 .

[2]  P.K. Steimer,et al.  Characterization of IGCTs for series connected operation , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[3]  J. Nasadoski,et al.  Overview of 1.2kV – 2.2kV SiC MOSFETs targeted for industrial power conversion applications , 2015, 2015 IEEE Applied Power Electronics Conference and Exposition (APEC).

[4]  David Grider,et al.  10 kV and 15 kV silicon carbide power MOSFETs for next-generation energy conversion and transmission systems , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[5]  B. Hull,et al.  High Switching Performance of 1700-V, 50-A SiC Power MOSFET Over Si IGBT/BiMOSFET for Advanced Power Conversion Applications , 2016, IEEE Transactions on Power Electronics.

[6]  S. Bhattacharya,et al.  Performance evaluation of series connected 1700V SiC MOSFET devices , 2015, 2015 IEEE 3rd Workshop on Wide Bandgap Power Devices and Applications (WiPDA).

[7]  S. Ryu,et al.  Silicon carbide power MOSFETs: Breakthrough performance from 900 V up to 15 kV , 2014, 2014 IEEE 26th International Symposium on Power Semiconductor Devices & IC's (ISPSD).

[8]  David E. Grider,et al.  10 kV, 120 A SiC half H-bridge power MOSFET modules suitable for high frequency, medium voltage applications , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[9]  Subhashish Bhattacharya,et al.  Medium voltage (≥ 2.3 kV) high frequency three-phase two-level converter design and demonstration using 10 kV SiC MOSFETs for high speed motor drive applications , 2016, 2016 IEEE Applied Power Electronics Conference and Exposition (APEC).

[10]  S. Ryu,et al.  Experimental switching frequency limits of 15 kV SiC N-IGBT module , 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).