An Information Acquisition Method of City Bus Integrated Control Network

An information acquisition method based on in-vehicle network is presented to ensure the optimum matching between the control modules inside the city bus with different control functions to the whole control performance optimization. A special function module for signal collecting and information processing is designed with embedded components and Controller Area Network (CAN). Hardware-In-Loop simulation by Vehicle Spy3 has been implemented to verify the reliability of the system, while performance evaluation of the system has been carried out through engine test, load test and communication test. The test results have shown its high reliability on signal processing and information acquisition.

[1]  Gangyan Li,et al.  Research on car information central control system and its rules , 2004, Fifth World Congress on Intelligent Control and Automation (IEEE Cat. No.04EX788).

[2]  Jie Zeng,et al.  Automatic Measurement and Control System for Vehicle ECU Based on CAN Bus , 2007, 2007 IEEE International Conference on Automation and Logistics.

[3]  Wanke Cao,et al.  Integrated Technology of Vehicle Network Based on CAN , 2006, 2006 6th World Congress on Intelligent Control and Automation.

[4]  E. Stipidis,et al.  What Lessons Can Controller Area Networks Learn From FlexRay , 2006, 2006 IEEE Vehicle Power and Propulsion Conference.

[5]  Xu Lei,et al.  Multi-function Intelligent Instrument of Vehicle Detection Based on Embedded System , 2006, 2006 6th World Congress on Intelligent Control and Automation.