Mars Science Laboratory Entry, Descent, and Landing Trajectory and Atmosphere Reconstruction

On August 5th 2012, The Mars Science Laboratory entry vehicle successfully entered Mars atmosphere and landed the Curiosity rover on its surface. A Kalman filter approach has been implemented to reconstruct the entry, descent, and landing trajectory based on all available data. The data sources considered in the Kalman filtering approach include the inertial measurement unit accelerations and angular rates, the terrain descent sensor, the measured landing site, orbit determination solutions for the initial conditions, and a new set of instrumentation for planetary entry reconstruction consisting of forebody pressure sensors, known as the Mars Entry Atmospheric Data System. These pressure measurements are unique for planetary entry, descent, and landing reconstruction as they enable a reconstruction of the freestream atmospheric conditions without any prior assumptions being made on the vehicle aerodynamics. Moreover, the processing of these pressure measurements in the Kalman filter approach enables the identification of atmospheric winds, which has not been accomplished in past planetary entry reconstructions. This separation of atmosphere and aerodynamics allows for aerodynamic model reconciliation and uncertainty quantification, which directly impacts future missions. This paper describes the mathematical formulation of the Kalman filtering approach, a summary of data sources and preprocessing activities, and results of the reconstruction.

[1]  F. Abilleira,et al.  Entry, Descent, and Landing Communications for the 2011 Mars Science Laboratory , 2012 .

[2]  A. Chen,et al.  Mars Science Laboratory Entry, Descent, and Landing System Overview , 2008, 2008 IEEE Aerospace Conference.

[3]  Mau Wong,et al.  Mars Science Laboratory Interplanetary Navigation Performance , 2013 .

[4]  J. T. Findlay,et al.  Shuttle subsonic horizontal wind estimation , 1983 .

[5]  A. Poznyak Filtering, Prediction and Smoothing , 2009 .

[6]  William I. Scallion,et al.  Aerodynamic Challenges for the Mars Science Laboratory Entry, Descent and Landing , 2009 .

[7]  Gavin F. Mendeck,et al.  Post-Flight EDL Entry Guidance Performance of the 2011 Mars Science Laboratory Mission , 2013 .

[8]  W. E. Wagner,et al.  Re-entry filtering, prediction, and smoothing. , 1966 .

[9]  D. Fraser,et al.  The optimum linear smoother as a combination of two optimum linear filters , 1969 .

[10]  Walter C. Engelund,et al.  Mars Entry Atmospheric Data System Modelling and Algorithm Development , 2009 .

[11]  Christopher D. Karlgaard,et al.  The Mars Science Laboratory (MSL) Entry, Descent And Landing Instrumentation (MEDLI): Hardware Performance and Data Reconstruction , 2013 .

[12]  Paul V. Tartabini,et al.  Hyper-X Post-Flight Trajectory Reconstruction , 2004 .

[13]  Christopher D. Karlgaard,et al.  Mars Entry Atmospheric Data System Trajectory Reconstruction Algorithms and Flight Results , 2013 .

[14]  W. E. Wagner,et al.  Formulation on statistical trajectory estimation programs , 1970 .

[15]  Deepak Bose,et al.  Entry Descent and Landing Workshop Proceedings. Volume 1; The Mars Science Laboratory (MSL) Entry, Descent and Landing Instrumentation (MEDLI) Hardware , 2013 .

[16]  Christopher D. Karlgaard,et al.  Ares I-X Trajectory Reconstruction: Methodology and Results , 2013 .

[17]  Artem A. Dyakonov,et al.  Hypersonic and Supersonic Static Aerodynamics of Mars Science Laboratory Entry Vehicle , 2012 .

[18]  J. Junkins,et al.  Optimal Estimation of Dynamic Systems , 2004 .

[19]  Niels Kjølstad Poulsen,et al.  New developments in state estimation for nonlinear systems , 2000, Autom..

[20]  Ashwin R. Vasavada,et al.  Assessment of Environments for Mars Science Laboratory Entry, Descent, and Surface Operations , 2012 .

[21]  Milad Mahzari,et al.  A RECONSTRUCTION OF AEROTHERMAL ENVIRONMENT AND THERMAL PROTECTION SYSTEM RESPONSE OF THE MARS SCIENCE LABORATORY ENTRY VEHICLE , 2013 .