Mechanical model of errors of probes for numerical controlled machine tools

Abstract CNC machine tool probes are not only used to set up the workpiece before machining and to control it after machining, but also to determine volumetric errors of the machine tool. That’s why there is a necessity not only for knowledge of the complete on-machine measurement system errors, but also for the knowledge about probe’s errors in separation from machine tools. This paper presents a theoretical model of errors of probes for CNC machine tools. It takes into account such unique features of the machine tool probes as the transducer with support on the whole circumference and as wireless communication. 3 probes: RMP60, MP700 and IRP32.00-MINI were tested using moving master artifact method, out of machine tool, to verify the model described. The triggering radius values obtained experimentally were compared with values calculated using theoretical model, resulting with a compliance up to 92%.

[1]  Myeong-Woo Cho,et al.  Integrated error compensation method using OMM system for profile milling operation , 2003 .

[2]  Steven D. Phillips,et al.  Error compensation for CMM touch trigger probes , 1996 .

[3]  Soichi Ibaraki,et al.  Error Calibration for Five-Axis Machine Tools by On-the-Machine Measurement Using a Touch-Trigger Probe , 2014, Int. J. Autom. Technol..

[4]  Steven D. Phillips,et al.  Practical aspects of touch-trigger probe error compensation , 1997 .

[5]  Marek Dobosz,et al.  Metrological feasibilities of CMM touch trigger probes. Part I: 3D theoretical model of probe pretravel , 2003 .

[6]  J. Sładek,et al.  Evaluation of coordinate measurement uncertainty with use of virtual machine model based on Monte Carlo method , 2012 .

[7]  Byung-Kwon Min,et al.  Reduction of machining errors of a three-axis machine tool by on-machine measurement and error compensation system , 2004 .

[8]  M.-W. Cho,et al.  Inspection Planning Strategy for the On-Machine Measurement Process Based on CAD/CAM/CAI Integration , 2002 .

[9]  M. W. Cho,et al.  Machining error compensation using radial basis function network based on CAD/CAM/CAI integration concept , 2002 .

[10]  Michał Jankowski,et al.  Machine tool probes testing using a moving inner hemispherical master artefact , 2014 .

[11]  M. Byszewski,et al.  Setup for Triggering Force Testing of Touch Probes for CNC Machine Tools and CMMs , 2013 .

[12]  J.R.R. Mayer,et al.  Axis Location Errors and Error Motions Calibration for a Five-axis Machine Tool Using the SAMBA Method , 2014 .

[13]  Soichi Ibaraki,et al.  Error map construction for rotary axes on five-axis machine tools by on-the-machine measurement using a touch-trigger probe , 2013 .

[14]  Marek Dobosz,et al.  Influence of measured objects parameters on CMM touch trigger probe accuracy of probing , 2005 .

[15]  J.R.R. Mayer,et al.  Five-axis machine tool calibration by probing a scale enriched reconfigurable uncalibrated master balls artefact , 2012 .