Effect of the Number of Zones in a One-Dimensional Plasmonic Zone Plate Lens: Simulation and Experiment

A 1D plasmonic zone plate lens (PZPL) consisting of nano-slits within a metal film introduces a phase delay distribution across the planar device surface by a modulation of the slit widths and positions to achieve light focusing. Using the finite-difference time-domain method, the number of zones is found to be a crucial factor for a well-controlled focal length, i.e. at least three zones are necessary for a PZPL exhibiting a focal length in agreement with the design. This conclusion is confirmed by confocal scanning optical microscopy on PZPLs patterned in an aluminium film. In addition, subwavelength light focusing is demonstrated both theoretically and experimentally in a PZPL. A larger PZPL, i.e. more zones, shows a higher resolution. A full full-width half-maximum of 0.37λ in the focal plane is shown theoretically in a PZPL with seven zones. A comparison between the PZPL and the plasmonic Fresnel zone plate shows that PZPLs have a higher contrast at the focus.

[1]  Wei Zhou,et al.  Experimental Investigation of Focusing of Gold Planar Plasmonic Lenses , 2010 .

[2]  Ann Roberts,et al.  Plasmonic lenses formed by two-dimensional nanometric cross-shaped aperture arrays for Fresnel-region focusing. , 2010, Nano letters.

[3]  Raj Mittra,et al.  Resolving Power of a Zone Plate , 1967 .

[4]  Changtao Wang,et al.  Beam manipulating by metallic nano-slits with variant widths. , 2005, Optics express.

[5]  Zhijun Sun,et al.  Refractive transmission of light and beam shaping with metallic nano-optic lenses , 2004 .

[6]  L. Lim,et al.  Plasmonic microzone plate: Superfocusing at visible regime , 2007 .

[7]  N. Park,et al.  Metal slit array Fresnel lens for wavelength-scale optical coupling to nanophotonic waveguides. , 2009, Optics express.

[8]  F. Fang,et al.  Experimental investigation of superfocusing of plasmonic lens with chirped circular nanoslits. , 2010, Optics express.

[9]  Reuven Gordon,et al.  Increased cut-off wavelength for a subwavelength hole in a real metal. , 2005, Optics express.

[10]  Zhijun Sun,et al.  Beam splitting with a modified metallic nano-optic lens , 2006 .

[11]  Toralf Scharf,et al.  On the chromatic aberration of microlenses. , 2006, Optics express.

[12]  A. Roberts,et al.  Planar focusing elements using spatially varying near-resonant aperture arrays. , 2010, Optics express.

[13]  H. Lezec,et al.  Extraordinary optical transmission through sub-wavelength hole arrays , 1998, Nature.

[14]  S. Lau,et al.  Near-field focusing properties of zone plates in visible regime--new insights. , 2008, Optics express.

[15]  L. Verslegers,et al.  Planar lenses based on nanoscale slit arrays in a metallic film , 2009, 2009 Conference on Lasers and Electro-Optics and 2009 Conference on Quantum electronics and Laser Science Conference.

[16]  Byoungho Lee,et al.  The use of plasmonics in light beaming and focusing , 2010 .

[17]  Chunlei Du,et al.  Structured lens formed by a 2D square hole array in a metallic film. , 2008, Optics letters.

[18]  D. Cumming,et al.  Visible light focusing demonstrated by plasmonic lenses based on nano-slits in an aluminum film. , 2010, Optics express.

[19]  Changtao Wang,et al.  Plasmonic beam deflector. , 2008, Optics express.

[20]  Zongfu Yu,et al.  Phase front design with metallic pillar arrays , 2010, CLEO/QELS: 2010 Laser Science to Photonic Applications.

[21]  R A Linke,et al.  Beaming Light from a Subwavelength Aperture , 2002, Science.