Use of a soft sensor for the fast estimation of dried cake resistance during a freeze-drying cycle.

[1]  Davide Fissore,et al.  Use of soft sensors to monitor a pharmaceuticals freeze-drying process in vials , 2014, Pharmaceutical development and technology.

[2]  Davide Fissore,et al.  Freeze-Drying Monitoring Using a New Process Analytical Technology: Toward a “Zero Defect” Process , 2013 .

[3]  Davide Fissore,et al.  In-Line and Off-Line Optimization of Freeze-Drying Cycles for Pharmaceutical Products , 2013 .

[4]  Marco Parvis,et al.  Inert Thermocouple With Nanometric Thickness for Lyophilization Monitoring , 2013, IEEE Transactions on Instrumentation and Measurement.

[5]  Davide Fissore,et al.  Quality by design: optimization of a freeze-drying cycle via design space in case of heterogeneous drying behavior and influence of the freezing protocol , 2013, Pharmaceutical development and technology.

[6]  K. Kristan,et al.  Rapid exploration of curing process design space for production of controlled-release pellets. , 2012, Journal of pharmaceutical sciences.

[7]  Davide Fissore,et al.  Model-Based Framework for the Analysis of Failure Consequences in a Freeze-Drying Process , 2012 .

[8]  Alessio Carullo,et al.  Measurement uncertainty issues in freeze-drying processes , 2012 .

[9]  Davide Fissore,et al.  A Model-Based Framework to Optimize Pharmaceuticals Freeze Drying , 2012 .

[10]  M. Parvis,et al.  Sputtered thermocouple for lyophilization monitoring , 2012, 2012 IEEE International Instrumentation and Measurement Technology Conference Proceedings.

[11]  Davide Fissore,et al.  Design and validation of an innovative soft-sensor for pharmaceuticals freeze-drying monitoring , 2011 .

[12]  Davide Fissore,et al.  Advanced approach to build the design space for the primary drying of a pharmaceutical freeze-drying process. , 2011, Journal of pharmaceutical sciences.

[13]  Davide Fissore,et al.  Heat Transfer in Freeze-Drying Apparatus , 2011 .

[14]  A. Depalma.  PAT Slowly Yielding to Broader QbD , 2011 .

[15]  Steven L Nail,et al.  Controlled nucleation in freeze-drying: effects on pore size in the dried product layer, mass transfer resistance, and primary drying rate. , 2011, Journal of pharmaceutical sciences.

[16]  Lisa M. Hardwick,et al.  Product mass transfer resistance directly determined during freeze-drying cycle runs using tunable diode laser absorption spectroscopy (TDLAS) and pore diffusion model. , 2011, Pharmaceutical development and technology.

[17]  Sumit Luthra,et al.  Investigation of Design Space for Freeze-Drying: Use of Modeling for Primary Drying Segment of a Freeze-Drying Cycle , 2011, AAPS PharmSciTech.

[18]  Davide Fissore,et al.  Freeze-drying cycle optimization using model predictive control techniques , 2011 .

[19]  Davide Fissore,et al.  On the Methods Based on the Pressure Rise Test for Monitoring a Freeze-Drying Process , 2010 .

[20]  Davide Fissore,et al.  In-line optimization and control of an industrial freeze-drying process for pharmaceuticals. , 2010, Journal of pharmaceutical sciences.

[21]  Hassan Hammouri,et al.  Development of a High Gain Observer for In-Line Monitoring of Sublimation in Vial Freeze Drying , 2010 .

[22]  Marco Parvis,et al.  In-Process Temperature Mapping System for Industrial Freeze Dryers , 2010, IEEE Transactions on Instrumentation and Measurement.

[23]  Michael J. Pikal,et al.  Determination of End Point of Primary Drying in Freeze-Drying Process Control , 2010, AAPS PharmSciTech.

[24]  Michael J. Pikal,et al.  Reduced Pressure Ice Fog Technique for Controlled Ice Nucleation during Freeze-Drying , 2009, AAPS PharmSciTech.

[25]  Hassan Hammouri,et al.  In-line monitoring of the primary drying phase of the freeze-drying process in vial by means of a Kalman filter based observer , 2009 .

[26]  Michael J Pikal,et al.  Non-invasive product temperature determination during primary drying using tunable diode laser absorption spectroscopy. , 2009, Journal of pharmaceutical sciences.

[27]  Antonello Barresi,et al.  In-line control of the lyophilization process. A gentle PAT approach using software sensors , 2009 .

[28]  Marco Parvis,et al.  A low-invasive system for local temperature mapping in large freeze dryers , 2009, 2009 IEEE Instrumentation and Measurement Technology Conference.

[29]  Steven L Nail,et al.  Rapid determination of vial heat transfer parameters using tunable diode laser absorption spectroscopy (TDLAS) in response to step-changes in pressure set-point during freeze-drying. , 2009, Journal of pharmaceutical sciences.

[30]  Antonello Barresi,et al.  Dynamic Parameters Estimation Method: Advanced Manometric Temperature Measurement Approach for Freeze-Drying Monitoring of Pharmaceutical Solutions , 2008 .

[31]  H. Gieseler,et al.  Evaluation of a New Wireless Temperature Remote Interrogation System (TEMPRIS) to Measure Product Temperature During Freeze Drying , 2008, AAPS PharmSciTech.

[32]  Geoffrey Lee,et al.  Effects of Vial Packing Density on Drying Rate during Freeze-drying of Carbohydrates or a Model Protein Measured using a Vial-weighing Technique , 2008, Pharmaceutical Research.

[33]  Steven J Davis,et al.  Evaluation of tunable diode laser absorption spectroscopy for in-process water vapor mass flux measurements during freeze drying. , 2007, Journal of pharmaceutical sciences.

[34]  Julien Andrieu,et al.  Modeling of freezing step during freeze‐drying of drugs in vials , 2007 .

[35]  A. Vallan.  A Measurement System for Lyophilization Process Monitoring , 2007, 2007 IEEE Instrumentation & Measurement Technology Conference IMTC 2007.

[36]  Felix Franks,et al.  Freeze-drying of Pharmaceuticals and Biopharmaceuticals , 2007 .

[37]  Julien Andrieu,et al.  Influence of controlled nucleation by ultrasounds on ice morphology of frozen formulations for pharmaceutical proteins freeze-drying , 2006 .

[38]  Lisa M. Hardwick,et al.  Rapid determination of dry layer mass transfer resistance for various pharmaceutical formulations during primary drying using product temperature profiles. , 2006, International journal of pharmaceutics.

[39]  Marco Parvis,et al.  A PlugaPlay Architecture for Low-Power Measurement Systems , 2005, IMTC 2005.

[40]  Xiaolin Tang,et al.  Freeze-Drying Process Design by Manometric Temperature Measurement: Design of a Smart Freeze-Dryer , 2005, Pharmaceutical Research.

[41]  J. Andrieu,et al.  Determination of mass and heat transfer parameters during freeze-drying cycles of pharmaceutical products. , 2005, PDA journal of pharmaceutical science and technology.

[42]  Julien Andrieu,et al.  Optimization of the Freeze-Drying Cycle: A New Model for Pressure Rise Analysis , 2004 .

[43]  Michael J. Pikal,et al.  Heat and mass transfer scale-up issues during freeze drying: II. Control and characterization of the degree of supercooling , 2004, AAPS PharmSciTech.

[44]  G. Winter,et al.  Continuous measurement of drying rate of crystalline and amorphous systems during freeze-drying using an in situ microbalance technique. , 2001, Journal of pharmaceutical sciences.

[45]  Giorgio Rovero,et al.  Experimentation and modelling of pharmaceutic lyophilization using a pilot plant , 1991 .

[46]  C. W. Hall.  HANDBOOK OF INDUSTRIAL DRYING , 1988 .

[47]  J. Wood.  Pharmaceutical dosage forms: Parenteral medications, vol. 1. Edited by Kenneth E. Avis, Leon Lachman, and Herbert A. Lieberman. Marcel Dekker, 270 Madison Avenue, New York, NY 10016. 1984. 480 pp., 18 × 25.5 cm. $59.75 , 1985 .

[48]  M. Pikal,et al.  Use of laboratory data in freeze drying process design: heat and mass transfer coefficients and the computer simulation of freeze drying. , 1985, Journal of parenteral science and technology : a publication of the Parenteral Drug Association.

[49]  M. Pikal,et al.  Physical chemistry of freeze-drying: measurement of sublimation rates for frozen aqueous solutions by a microbalance technique. , 1983, Journal of pharmaceutical sciences.

[50]  Davide Fissore,et al.  Process Analytical Technology (PAT) in Freeze Drying , 2015 .

[51]  Davide Fissore,et al.  On the use of mathematical models to build the design space for the primary drying phase of a pharmaceutical lyophilization process. , 2011, Journal of pharmaceutical sciences.

[52]  Davide Fissore,et al.  Monitoring and controlling processes with complex dynamics using soft-sensors , 2009 .

[53]  Antonello Barresi,et al.  Development of simplified models for the freeze-drying process and investigation of the optimal operating conditions , 2008 .

[54]  Geoffrey Lee,et al.  Effect of freeze-dryer design on drying rate of an amorphous protein-formulation determined with a gravimetric technique. , 2008, Pharmaceutical development and technology.

[55]  Luca Ferrarini,et al.  Modeling, Control, Simulation and Diagnosis of Complex Industrial and Energy Systems , 2008 .

[56]  S L Nail,et al.  Evaluation of manometric temperature measurement as a method of monitoring product temperature during lyophilization. , 1997, PDA journal of pharmaceutical science and technology.

[57]  H Willemer,et al.  Measurements of temperatures, ice evaporation rates and residual moisture contents in freeze-drying. , 1992, Developments in biological standardization.

[58]  J. G. Armstrong.  Use of the capacitance manometer gauge in vacuum freeze-drying. , 1980, Journal of the Parenteral Drug Association.