Total sliding-mode controller for PM synchronous servo motor drive using recurrent fuzzy neural network

In this paper, the dynamic responses of a recurrent-fuzzy-neural-network (RFNN) sliding-mode-controlled permanent-magnet (PM) synchronous servo motor are described. First, a newly designed total sliding-mode control system, which is insensitive to uncertainties, including parameter variations and external disturbance in the whole control process, is introduced. The total sliding-mode control comprises the baseline model design and the curbing controller design. In the baseline model design, a computed torque controller is designed to cancel the nonlinearity of the nominal plant. In the curbing controller design, an additional controller is designed using a new sliding surface to ensure the sliding motion through the entire state trajectory. Therefore, in the total sliding-mode control system, the controlled system has a total sliding motion without a reaching phase. Then, to overcome the two main problems with sliding-mode control, i.e., the assumption of known uncertainty bounds and the chattering phenomena in the control effort, an RFNN sliding-mode control system is investigated to control the PM synchronous servo motor. In the RFNN sliding-mode control system, an RFNN bound observer is utilized to adjust the uncertainty bounds in real time. To guarantee the convergence of tracking error, analytical methods based on a discrete-type Lyapunov function are proposed to determine the varied learning rates of the RFNN. Simulated and experimental results due to periodic step and sinusoidal commands show that the dynamic behaviors of the proposed control systems are robust with regard to uncertainties.

[1]  Rong-Jong Wai,et al.  Fuzzy neural network sliding-mode position controller for induction servo motor drive , 1999 .

[2]  Faa-Jeng Lin,et al.  Slider-crank mechanism control using adaptive computed torque technique , 1998 .

[3]  Germano Lambert-Torres,et al.  A genetic-based neuro-fuzzy approach for modeling and control of dynamical systems , 1998, IEEE Trans. Neural Networks.

[4]  Weibing Gao,et al.  Variable structure control of nonlinear systems: a new approach , 1993, IEEE Trans. Ind. Electron..

[5]  Fumio Harashima,et al.  Brushless servo motor control using variable structure approach , 1988 .

[6]  Chun-Yi Su,et al.  A sliding mode controller with bound estimation for robot manipulators , 1993, IEEE Trans. Robotics Autom..

[7]  Werner Leonhard,et al.  Control of Electrical Drives , 1990 .

[8]  Faa-Jeng Lin Real-time IP position controller design with torque feedforward control for PM synchronous motor , 1997, IEEE Trans. Ind. Electron..

[9]  Weiping Li,et al.  Applied Nonlinear Control , 1991 .

[10]  Jun-ichi Imura,et al.  Adaptive robust control of robot manipulators-theory and experiment , 1994, IEEE Trans. Robotics Autom..

[11]  Kwang Y. Lee,et al.  Diagonal recurrent neural networks for dynamic systems control , 1995, IEEE Trans. Neural Networks.

[12]  Tzuen-Lih Chen,et al.  An optimal variable structure control with integral compensation for electrohydraulic position servo control systems , 1992, IEEE Trans. Ind. Electron..

[13]  Mietek A. Brdys,et al.  Dynamic neural controllers for induction motor , 1999, IEEE Trans. Neural Networks.

[14]  Toshio Fukuda,et al.  Intelligent position/force controller for industrial robot manipulators-application of fuzzy neural networks , 1997, IEEE Trans. Ind. Electron..

[15]  Liang Jin,et al.  Stable dynamic backpropagation learning in recurrent neural networks , 1999, IEEE Trans. Neural Networks.

[16]  Anthony Tzes,et al.  Neural network control for DC motor micromaneuvering , 1995, IEEE Trans. Ind. Electron..

[17]  John Y. Hung,et al.  Variable structure control: a survey , 1993, IEEE Trans. Ind. Electron..

[18]  Mohammad Teshnehlab,et al.  Self tuning of computed torque gains by using neural networks with flexible structures , 1994 .

[19]  Rong-Jong Wai,et al.  A PM synchronous servo motor drive with an on-line trained fuzzy neural network controller , 1998 .

[20]  A. Koivo Fundamentals for Control of Robotic Manipulators , 1989 .

[21]  Francesco Cupertino,et al.  Sliding mode control of an induction motor , 2000 .

[22]  Tsu-Tian Lee,et al.  On-line tuning of fuzzy-neural network for adaptive control of nonlinear dynamical systems , 1997, IEEE Trans. Syst. Man Cybern. Part B.

[23]  Tommy W. S. Chow,et al.  A recurrent neural-network-based real-time learning control strategy applying to nonlinear systems with unknown dynamics , 1998, IEEE Trans. Ind. Electron..

[24]  Jie Zhang,et al.  Recurrent neuro-fuzzy networks for nonlinear process modeling , 1999, IEEE Trans. Neural Networks.

[25]  Hideki Hashimoto,et al.  MOSFET Converter-Fed Position Servo System with Sliding Mode Control , 1985, IEEE Transactions on Industrial Electronics.

[26]  Yie-Chien Chen,et al.  A model reference control structure using a fuzzy neural network , 1995 .

[27]  T. Lipo,et al.  Vector Control and Dynamics of AC Drives , 1996 .

[28]  R. Fung,et al.  Comparison of sliding-mode and fuzzy neural network control for motor-toggle servomechanism , 1998 .

[29]  Chia-Feng Juang,et al.  A recurrent self-organizing neural fuzzy inference network , 1997, Proceedings of 6th International Fuzzy Systems Conference.

[30]  Faa-Jeng Lin,et al.  Novel sliding mode controller for synchronous motor drive , 1998 .

[31]  Chin-Teng Lin,et al.  A recurrent self-organizing neural fuzzy inference network , 1999, IEEE Trans. Neural Networks.

[32]  Li-Xin Wang,et al.  A Course In Fuzzy Systems and Control , 1996 .

[33]  Karl Johan Åström,et al.  Adaptive Control , 1989, Embedded Digital Control with Microcontrollers.

[34]  Rong-Jong Wai,et al.  A supervisory fuzzy neural network control system for tracking periodic inputs , 1999, IEEE Trans. Fuzzy Syst..

[35]  Chin-Teng Lin,et al.  Neural fuzzy systems , 1994 .