A review:aluminum nitride MEMS contour-mode resonator

Over the past several decades, the technology of micro-electromechanical system (MEMS) has advanced. A clear need of miniaturization and integration of electronics components has had new solutions for the next generation of wireless communications. The aluminum nitride (AlN) MEMS contour-mode resonator (CMR) has emerged and become promising and competitive due to the advantages of the small size, high quality factor and frequency, low resistance, compatibility with integrated circuit (IC) technology, and the ability of integrating multi-frequency devices on a single chip. In this article, a comprehensive review of AlN MEMS CMR technology will be presented, including its basic working principle, main structures, fabrication processes, and methods of performance optimization. Among these, the deposition and etching process of the AlN film will be specially emphasized and recent advances in various performance optimization methods of the CMR will be given through specific examples which are mainly focused on temperature compensation and reducing anchor losses. This review will conclude with an assessment of the challenges and future trends of the CMR.

[1]  T. Kenny,et al.  Investigation of energy loss mechanisms in micromechanical resonators , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[2]  F. P. Stratton,et al.  A MEMS-based quartz resonator technology for GHz applications , 2004, Proceedings of the 2004 IEEE International Frequency Control Symposium and Exposition, 2004..

[3]  Anming Gao,et al.  Parametric excitation in geometrically optimized AlN contour mode resonators , 2015, 2015 Joint Conference of the IEEE International Frequency Control Symposium & the European Frequency and Time Forum.

[4]  V.V. Felmetsger,et al.  Crystal orientation and stress in AC reactively sputtered AlN films on Mo electrodes for electro-acoustic devices , 2008, 2008 IEEE Ultrasonics Symposium.

[5]  Meng Zhang,et al.  Researching the Aluminum Nitride Etching Process for Application in MEMS Resonators , 2015, Micromachines.

[6]  Mingzhe Hu,et al.  Influence of substrate metals on the crystal growth of AlN films , 2010 .

[7]  Jan Van der Spiegel,et al.  1.5-GHz CMOS voltage-controlled oscillator based on thickness-field-excited piezoelectric AlN contour-mode MEMS resonators , 2010, IEEE Custom Integrated Circuits Conference 2010.

[8]  Robert Thalhammer,et al.  Energy loss mechanisms in SMR-type BAW devices , 2005, IEEE MTT-S International Microwave Symposium Digest, 2005..

[9]  R. Reif,et al.  Measurements of the bulk, C-axis electromechanical coupling constant as a function of AlN film quality , 2000, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[10]  A. Tazzoli,et al.  High frequency AlN MEMS resonators with integrated nano hot plate for temperature controlled operation , 2012, 2012 IEEE International Frequency Control Symposium Proceedings.

[11]  Chengjie Zuo,et al.  Super-high-frequency two-port AlN contour-mode resonators for RF applications , 2010, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[12]  Jeffrey S. Walling,et al.  Contour-Mode Ring-Shaped AlN Microresonator on Si and Feasibility of Its Application in Series-Resonant Converter , 2015, IEEE Transactions on Power Electronics.

[13]  Luke F. Lester,et al.  Selective inductively coupled plasma etching of group-III nitrides in Cl2- and BCl3-based plasmas , 1998 .

[14]  Gianluca Piazza,et al.  Ovenized high frequency oscillators based on aluminum nitride contour-mode MEMS resonators , 2011, 2011 International Electron Devices Meeting.

[15]  Chengjie Zuo,et al.  Reconfigurable CMOS Oscillator Based on Multifrequency AlN Contour-Mode MEMS Resonators , 2011, IEEE Transactions on Electron Devices.

[16]  Clark T.-C. Nguyen,et al.  Capacitive-piezoelectric AlN resonators with Q>12,000 , 2011, 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems.

[17]  Bin Peng,et al.  AlN film SAW resonator integrated with metal structure , 2015 .

[18]  Joshua E.-Y. Lee,et al.  5.4-MHz single-crystal silicon wine glass mode disk resonator with quality factor of 2 million , 2009 .

[19]  Gianluca Piazza,et al.  A 586 MHz microcontroller compensated MEMS oscillator based on ovenized aluminum nitride contour-mode resonators , 2012, 2012 IEEE International Ultrasonics Symposium.

[20]  K. M. Lakin,et al.  RF filter design using LTCC and thin film BAW technology , 2001, 2001 IEEE Ultrasonics Symposium. Proceedings. An International Symposium (Cat. No.01CH37263).

[21]  F. Calle,et al.  Synthesis of c-axis oriented AlN thin films on different substrates: A review , 2010 .

[22]  Wolfgang Brand,et al.  Piezoelectric thin AlN films for bulk acoustic wave (BAW) resonators , 2003 .

[23]  Ilesanmi Adesida,et al.  High rate etching of AlN using BCl3/Cl2/Ar inductively coupled plasma , 2002 .

[24]  Hagen Bartzsch,et al.  Sputter deposition of stress controlled piezoelectric AlN and AlScN films for ultrasonic and energy harvesting applications , 2013, 2013 IEEE International Ultrasonics Symposium (IUS).

[25]  Arnab Bhattacharya,et al.  ICP-RIE etching of polar, semi-polar and non-polar AlN: comparison of Cl2/Ar and Cl2/BCl3/Ar plasma chemistry and surface pretreatment , 2014 .

[26]  G. Piazza,et al.  Reduction of anchor losses by etched slots in aluminum nitride contour mode resonators , 2013, 2013 Joint European Frequency and Time Forum & International Frequency Control Symposium (EFTF/IFC).

[27]  R. Dekker,et al.  Materials for bulk acoustic wave (BAW) resonators and filters , 2001 .

[28]  J. Olivares,et al.  Influence of crystal quality on the excitation and propagation of surface and bulk acoustic waves in polycrystalline AlN films , 2012, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[29]  Joshua E.-Y. Lee,et al.  Design of Phononic Crystal Tethers for Frequency-selective Quality Factor Enhancement in AlN Piezoelectric-on-silicon Resonators☆ , 2015 .

[30]  He Wang,et al.  Effect of Ag on the properties of solders and brazing filler metals , 2015, Journal of Materials Science: Materials in Electronics.

[31]  Gianluca Piazza,et al.  Segmented electrode excitation of aluminum nitride contour mode resonators to optimize the device figure of merit , 2013, 2013 Transducers & Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS & EUROSENSORS XXVII).

[32]  M. K. Mikhov,et al.  Effect of pre-deposition rf plasma etching on wafer surface morphology and crystal orientation of piezoelectric AlN thin films , 2014, 2014 IEEE International Ultrasonics Symposium.

[33]  Haoshen Zhu,et al.  AlN piezoelectric on silicon MEMS resonator with boosted Q using planar patterned phononic crystals on anchors , 2015, 2015 28th IEEE International Conference on Micro Electro Mechanical Systems (MEMS).

[34]  Thierry Aubert,et al.  Investigations of AlN thin film crystalline properties in a wide temperature range by in situ x-ray diffraction measurements: Correlation with AlN/sapphire-based SAW structure performance , 2015, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control.

[35]  G. K. Ho,et al.  High-Q single crystal silicon HARPSS capacitive beam resonators with self-aligned sub-100-nm transduction gaps , 2003 .

[36]  Gianluca Piazza,et al.  Analytical and Numerical Methods to Model Anchor Losses in 65-MHz AlN Contour Mode Resonators , 2016, Journal of Microelectromechanical Systems.

[37]  Navab Singh,et al.  Molybdenum etching using an SF6, BCl3 and Ar based recipe for high aspect ratio MEMS device fabrication , 2013 .

[38]  Gianluca Piazza,et al.  Quality Factor Dependence on the Inactive Regions in AlN Contour-Mode Resonators , 2015, Journal of microelectromechanical systems.

[39]  Navab Singh,et al.  Improving aluminum nitride plasma etch process for MEMS applications , 2013 .

[40]  Ulrich Schmid,et al.  The influence of sputter deposition parameters on piezoelectric and mechanical properties of AlN thin films , 2010 .

[41]  Kazuhiro Nonaka,et al.  Influence of aluminum nitride interlayers on crystal orientation and piezoelectric property of aluminum nitride thin films prepared on titanium electrodes , 2007 .

[42]  A. Tazzoli,et al.  High power and low temperature coefficient of frequency oscillator based on a fully anchored and oxide compensated ALN contour-mode MEMS resonator , 2012, 2012 IEEE 25th International Conference on Micro Electro Mechanical Systems (MEMS).

[43]  Kazuhiro Nonaka,et al.  Local epitaxial growth of aluminum nitride and molybdenum thin films in fiber texture using aluminum nitride interlayer , 2006 .

[44]  Bing Xiong,et al.  Smooth etching of epitaxially grown AlN film by Cl2/BCl3/Ar-based inductively coupled plasma , 2015 .

[45]  M. K. Mikhov,et al.  Deposition of smooth and highly (111) textured Al bottom electrodes for AlN-based electroacoustic devices , 2012, 2012 IEEE International Frequency Control Symposium Proceedings.

[46]  Gianluca Piazza,et al.  Analysis of the impact of release area on the quality factor of contour-mode resonators by laser Doppler vibrometry , 2015, 2015 Joint Conference of the IEEE International Frequency Control Symposium & the European Frequency and Time Forum.

[47]  J. Bjurstrom,et al.  Synthesis of c-axis-oriented AlN thin films on high-conducting layers: Al, Mo, Ti, TiN, and Ni , 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[48]  Wen Zhiyu,et al.  The fabrication of vibration energy harvester arrays based on AlN piezoelectric film , 2013 .

[49]  G. Piazza,et al.  AlN Contour-Mode Vibrating RF MEMS for Next Generation Wireless Communications , 2006, 2006 Proceedings of the 32nd European Solid-State Circuits Conference.

[50]  R. J. Shul,et al.  Effect of additive noble gases in chlorine-based inductively coupled plasma etching of GaN, InN, and AlN , 1999 .

[51]  Ulrich Schmid,et al.  c-axis orientation and piezoelectric coefficients of AlN thin films sputter-deposited on titanium bottom electrodes , 2012 .

[52]  G. Piazza,et al.  Experimental study on the impact of anchor losses on the quality factor of contour mode AlN resonators , 2013, 2013 Transducers & Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS & EUROSENSORS XXVII).

[53]  C.T.-C. Nguyen,et al.  1.156-GHz self-aligned vibrating micromechanical disk resonator , 2004, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[54]  Guofeng Yang,et al.  Effect of substrate temperature and bias voltage on the properties in DC magnetron sputtered AlN films on glass substrates , 2016, Journal of Materials Science: Materials in Electronics.

[55]  Chengjie Zuo,et al.  1.05-GHz CMOS oscillator based on lateral- field-excited piezoelectric AlN contour- mode MEMS resonators , 2010, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[56]  Denis Shamiryan,et al.  Influence of crystallographic orientation on dry etch properties of TiN , 2006 .

[57]  G. Piazza,et al.  Low motional resistance ring-shaped contour-mode aluminum nitride piezoelectric micromechanical resonators for UHF applications , 2005, 18th IEEE International Conference on Micro Electro Mechanical Systems, 2005. MEMS 2005..

[58]  Robert F. Davis,et al.  High rate and selective etching of GaN, AlGaN, and AlN using an inductively coupled plasma , 1997 .

[59]  A. Pisano,et al.  Piezoelectric Aluminum Nitride Vibrating Contour-Mode MEMS Resonators , 2006, Journal of Microelectromechanical Systems.

[60]  Gianluca Piazza,et al.  Enhancement of the Quality Factor of AlN Contour Mode Resonators by Acoustic Reflection: Numerical Design and Experimental Investigation , 2014 .