Rapid, Single-Molecule Assays in Nano/Micro-Fluidic Chips with Arrays of Closely Spaced Parallel Channels Fabricated by Femtosecond Laser Machining

Cost-effective pharmaceutical drug discovery depends on increasing assay throughput while reducing reagent needs. To this end, we are developing an ultrasensitive, fluorescence-based platform that incorporates a nano/micro-fluidic chip with an array of closely spaced channels for parallelized optical readout of single-molecule assays. Here we describe the use of direct femtosecond laser machining to fabricate several hundred closely spaced channels on the surfaces of fused silica substrates. The channels are sealed by bonding to a microscope cover slip spin-coated with a thin film of poly(dimethylsiloxane). Single-molecule detection experiments are conducted using a custom-built, wide-field microscope. The array of channels is epi-illuminated by a line-generating red diode laser, resulting in a line focus just a few microns thick across a 500 micron field of view. A dilute aqueous solution of fluorescently labeled biomolecules is loaded into the device and fluorescence is detected with an electron-multiplying CCD camera, allowing acquisition rates up to 7 kHz for each microchannel. Matched digital filtering based on experimental parameters is used to perform an initial, rapid assessment of detected fluorescence. More detailed analysis is obtained through fluorescence correlation spectroscopy. Simulated fluorescence data is shown to agree well with experimental values.

[1]  Jing-Juan Xu,et al.  Large scale lithography-free nano channel array on polystyrene. , 2010, Lab on a chip.

[2]  G. Georgiou,et al.  High-throughput screening of enzyme libraries. , 2000, Current opinion in biotechnology.

[3]  S. Matsuo,et al.  Examination of Etching Agent and Etching Mechanism on Femotosecond Laser Microfabrication of Channels Inside Vitreous Silica Substrates , 2009 .

[4]  L. Davis,et al.  Monte carlo simulation of a single-molecule detection experiment. , 1998, Applied optics.

[5]  Paul I. Okagbare,et al.  Polymer‐based dense fluidic networks for high throughput screening with ultrasensitive fluorescence detection , 2010, Electrophoresis.

[6]  Franco Zappa,et al.  Ultra high-throughput single molecule spectroscopy with a 1024 pixel SPAD , 2011, BiOS.

[7]  G. Mourou,et al.  Laser ablation and micromachining with ultrashort laser pulses , 1997 .

[8]  Ethan Schonbrun,et al.  High-throughput fluorescence detection using an integrated zone-plate array. , 2010, Lab on a chip.

[9]  Chong Liu,et al.  Fabrication of planar nanofluidic channels in thermoplastic polymers by O 2 plasma etching , 2012 .

[10]  Hae Woon Choi,et al.  Femtosecond laser micromachining of dielectric materials for biomedical applications , 2008 .

[11]  William N. Robinson.  Monte Carlo Simulations of Single-Molecule Fluorescence Detection Experiments , 2011 .

[12]  Lloyd M. Davis,et al.  Machining of High-Aspect Micro/Nano-Channels with a Single Femtosecond Laser Pulse Focused to a Line , 2011, CLEO 2011.

[13]  Matthew Parrish,et al.  On femtosecond micromachining of HPHT single-crystal diamond with direct laser writing using tight focusing. , 2010, Optics express.

[14]  Ming Yu,et al.  Multilayer polymer microchip capillary array electrophoresis devices with integrated on-chip labeling for high-throughput protein analysis. , 2011, Analytical chemistry.

[15]  K. R. Williams,et al.  Etch rates for micromachining processing-Part II , 2003 .

[16]  A. Lee,et al.  1-Million droplet array with wide-field fluorescence imaging for digital PCR. , 2011, Lab on a chip.

[17]  Daniel J. Ehrlich,et al.  384-channel parallel microfluidic cytometer for rare-cell screening. , 2009, Lab on a chip.

[18]  C. Mackay,et al.  Photon counting strategies with low-light-level CCDs , 2003, astro-ph/0307305.

[19]  S A Sundberg,et al.  High-throughput and ultra-high-throughput screening: solution- and cell-based approaches. , 2000, Current opinion in biotechnology.

[20]  Don L DeVoe,et al.  Integration of isoelectric focusing with parallel sodium dodecyl sulfate gel electrophoresis for multidimensional protein separations in a plastic microfluidic [correction of microfludic] network. , 2004, Analytical chemistry.

[21]  Stephen L. Gasior,et al.  The human LINE-1 retrotransposon creates DNA double-strand breaks. , 2006, Journal of molecular biology.

[22]  G. Whitesides,et al.  Poly(dimethylsiloxane) as a material for fabricating microfluidic devices. , 2002, Accounts of chemical research.

[23]  Kenji Okamoto,et al.  Polymer nanochannels fabricated by thermomechanical deformation for single-molecule analysis. , 2005, Analytical chemistry.

[24]  Andreas E. Guber,et al.  Microfabrication of single-use plastic microfluidic devices for high-throughput screening and DNA analysis , 2002 .

[25]  Yan Li,et al.  Integration of isoelectric focusing with parallel sodium dodecyl sulfate gel electrophoresis for multidimensional protein separations in a plastic microfludic network , 2004 .

[26]  Zbigniew Sikorski,et al.  Single-pulse ultrafast-laser machining of high aspect nano-holes at the surface of SiO2. , 2008, Optics express.