Silicic acid: boric acid complexes as wood preservatives

Wood was treated with a low molecular-weight silicic acid: boric acid agent and examined for increased resistance to termites and combustion. Wood treated with silicic acid only exhibited increased termite resistance, but not to the marked extent observed after treatment with a mixture of silicic and boric acids. Increasing the quantity of boric acid also increased the termite mortality rate and shortened the time to death. Oral-toxicity tests using dyed silicic acid: boric acid suggested that the boric acid in the agent acted as a stomach poison. Field tests on stakes over three years showed that even if stakes were placed near the termite exit, those treated with silicic acid and high levels of boric acid had no attack by termites and maintained their original form. Though these specimens were installed in the field during three rainy seasons (about six months in total) in three years, the termite resistance ability of these chemicals was maintained. It became clear that this silicic acid: boric acid agent has a high water resistance ability worthy of application in the outdoors. Combustion tests showed that flame and glowing combustion times were shortened at high levels of boric acid. When a boric acid: methanol solution was added at of rate of not less than 25 ml for 100 g of colloidal silicic acid solution (CSAS), flaming and glowing combustion were not observed. Although the charring length of the wood specimen which was treated with a low molecular weight silicic acid: boric acid agent decreased to 2/3 of that of the control wood, the charring lengths were not influenced by the level of boric acid. However, the volume of smoke decreased relative to the amount of boric acid that had been added.