Review—Recent Advances and Remaining Challenges for Lithium Ion Battery Cathodes I. Nickel-Rich, LiNixCoyMnzO2

[1]  G. Ceder,et al.  Factors that affect Li mobility in layered lithium transition metal oxides , 2006 .

[2]  J. Dahn,et al.  Methods to obtain excellent capacity retention in LiCoO2 cycled to 4.5 V , 2004 .

[3]  Xiao‐Qing Yang,et al.  Soft X-Ray Absorption Spectroscopic Study of a LiNi0.5Mn0.5 O 2 Cathode during Charge , 2004 .

[4]  Jisuk Kim,et al.  Controlled Nanoparticle Metal Phosphates (Metal = Al , Fe, Ce, and Sr) Coatings on LiCoO2 Cathode Materials , 2005 .

[5]  Feixiang Wu,et al.  Li-ion battery materials: present and future , 2015 .

[6]  Debasish Mohanty,et al.  Correlating cation ordering and voltage fade in a lithium-manganese-rich lithium-ion battery cathode oxide: a joint magnetic susceptibility and TEM study. , 2013, Physical chemistry chemical physics : PCCP.

[7]  M. Ichimura,et al.  Characterization and cathode performance of Li1 − xNi1 + xO2 prepared with the excess lithium method , 1995 .

[8]  P. Bruce,et al.  The Layered Intercalation Compounds Li(Mn1−yCoy)O2: Positive Electrode Materials for Lithium–Ion Batteries , 1999 .

[9]  F. Schipper,et al.  Biomass-Derived Heteroatom-Doped Carbon Aerogels from a Salt Melt Sol-Gel Synthesis and their Performance in Li-S Batteries. , 2015, ChemSusChem.

[10]  H. Wiemhöfer,et al.  A detailed thermal study of a Li[Ni0.33Co0.33Mn0.33]O2/LiMn2O4-based lithium ion cell by accelerating rate and differential scanning calorimetry , 2014 .

[11]  Min Gyu Kim,et al.  A new coating method for alleviating surface degradation of LiNi0.6Co0.2Mn0.2O2 cathode material: nanoscale surface treatment of primary particles. , 2015, Nano letters.

[12]  P. Bruce,et al.  New intercalation compounds for lithium batteries: layered LiMnO2 , 1999 .

[13]  Min-Joon Lee,et al.  Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries. , 2015, Angewandte Chemie.

[14]  B. Borie,et al.  Alkali Metal-Nickel Oxides of the Type MNiO2 , 1954 .

[15]  M. Hon,et al.  Effect of Al addition on formation of layer-structured LiNiO2 , 2002 .

[16]  Haegyeom Kim,et al.  Understanding the Degradation Mechanisms of LiNi0.5Co0.2Mn0.3O2 Cathode Material in Lithium Ion Batteries , 2014 .

[17]  A. Milewska,et al.  Structural, transport and electrochemical properties of LiNi1 − yCoyMn0.1O2 and Al, Mg and Cu-substituted LiNi0.65Co0.25Mn0.1O2 oxides , 2011 .

[18]  C. Delmas,et al.  Optimization of the Composition of the Li1 − z Ni1 + z O 2 Electrode Materials: Structural, Magnetic, and Electrochemical Studies , 1996 .

[19]  J. Dahn,et al.  In Situ X-ray Diffraction Study of Layered Li-Ni-Mn-Co Oxides: Effect of Particle Size and Structural Stability of Core-Shell Materials , 2016 .

[20]  Feng Wu,et al.  Electrochemical Evaluation and Structural Characterization of Commercial LiCoO2 Surfaces Modified with MgO for Lithium-Ion Batteries , 2002 .

[21]  Masahiro Kinoshita,et al.  Capacity fade of LiAlyNi1−x−yCoxO2 cathode for lithium-ion batteries during accelerated calendar and cycle life tests (surface analysis of LiAlyNi1−x−yCoxO2 cathode after cycle tests in restricted depth of discharge ranges) , 2014 .

[22]  Feng Lin,et al.  Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteries , 2014, Nature Communications.

[23]  Tae-Joon Kim,et al.  Zero-Strain Intercalation Cathode for Rechargeable Li-Ion Cell. , 2001, Angewandte Chemie.

[24]  J. Tarascon,et al.  Mechanism for Limited 55°C Storage Performance of Li1.05Mn1.95 O 4 Electrodes , 1999 .

[25]  C. Fisher,et al.  Microstructural Changes in LiNi0.8Co0.15Al0.05O2 Positive Electrode Material during the First Cycle , 2011 .

[26]  Y. Ikuhara,et al.  STEM characterization for lithium-ion battery cathode materials , 2012 .

[27]  Peter G. Bruce,et al.  Synthesis of layered LiMnO2 as an electrode for rechargeable lithium batteries , 1996, Nature.

[28]  Evan M. Erickson,et al.  Li+‐Ion Extraction/Insertion of Ni‐Rich Li1+x(NiyCozMnz)wO2 (0.005 , 2015 .

[29]  Na Yeon Kim,et al.  Microstructural study on degradation mechanism of layered LiNi0.6Co0.2Mn0.2O2 cathode materials by analytical transmission electron microscopy , 2016 .

[30]  L. Downie,et al.  Study of the Failure Mechanisms of LiNi0.8Mn0.1Co0.1O2 Cathode Material for Lithium Ion Batteries , 2015 .

[31]  T. Nonaka,et al.  Studying the Charging Process of a Lithium-Ion Battery toward 10 V by In Situ X-ray Absorption and Diffraction: Lithium Insertion/Extraction with Side Reactions at Positive and Negative Electrodes , 2016 .

[32]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.

[33]  J. Janek,et al.  On the gassing behavior of lithium-ion batteries with NCM523 cathodes , 2016, Journal of Solid State Electrochemistry.

[34]  T. Ohzuku,et al.  Layered Lithium Insertion Material of LiCo1/3Ni1/3Mn1/3O2 for Lithium-Ion Batteries , 2001 .

[35]  Xiqian Yu,et al.  Structural changes and thermal stability of charged LiNixMnyCozO₂ cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy. , 2014, ACS applied materials & interfaces.

[36]  J. Besenhard,et al.  Cathodic reduction of graphite in organic solutions of alkali and NR4+ salts , 1974 .

[37]  D. Aurbach,et al.  Capacity fading of LixMn2O4 spinel electrodes studied by XRD and electroanalytical techniques , 1999 .

[38]  Wang Jing-ping,et al.  Improvement of LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2 Cathode Materials by Nano-MgO Doping , 2011 .

[39]  Guoying Chen,et al.  Li2CO3 in LiNi0.8Co0.15Al0.05O2 cathodes and its effects on capacity and power , 2004 .

[40]  B. Rao,et al.  The Li/TiS2 cell with LiSCN electrolyte , 1980 .

[41]  Zhixing Wang,et al.  Improved high voltage electrochemical performance of Li2ZrO3-coated LiNi0.5Co0.2Mn0.3O2 cathode material , 2015 .

[42]  J. Tarascon,et al.  CoO2, the end member of the LixCoO2 solid solution , 1996 .

[43]  Byungwoo Park,et al.  Novel LiCoO2 Cathode Material with Al2O3 Coating for a Li Ion Cell , 2000 .

[44]  Gerbrand Ceder,et al.  Structural stability of lithium manganese oxides , 1999 .

[45]  J. J. Murray,et al.  Lithium-ion cell based on orthorhombic LiMnO2 , 1995 .

[46]  M. Wohlfahrt‐Mehrens,et al.  Preparation of LiBOB via rheological phase method and its application to mitigate voltage fade of Li1.16[Mn0.75Ni0.25]0.84O2 cathode , 2015 .

[47]  Ying Shirley Meng,et al.  Electrodes with High Power and High Capacity for Rechargeable Lithium Batteries , 2006, Science.

[48]  Patrick Willmann,et al.  Effect of cobalt substitution on cationic distribution in LiNi1 − y CoyO2 electrode materials , 1996 .

[49]  J. Tarascon,et al.  Review—Li-Rich Layered Oxide Cathodes for Next-Generation Li-Ion Batteries: Chances and Challenges , 2015 .

[50]  M. Sam Mannan,et al.  Thermal Runaway in Lithium-Ion Batteries: Incidents, Kinetics of the Runaway and Assessment of Factors Affecting Its Initiation , 2016 .

[51]  J. Dahn,et al.  In situ x-ray diffraction and electrochemical studies of Li1−xNiO2 , 1993 .

[52]  Evan M. Erickson,et al.  Stabilizing nickel-rich layered cathode materials by a high-charge cation doping strategy: zirconium-doped LiNi0.6Co0.2Mn0.2O2 , 2016 .

[53]  Jeff Dahn,et al.  Rechargeable LiNiO2 / Carbon Cells , 1991 .

[54]  Debasish Mohanty,et al.  Unraveling the Voltage-Fade Mechanism in High-Energy-Density Lithium-Ion Batteries: Origin of the Tetrahedral Cations for Spinel Conversion , 2014 .

[55]  Tsutomu Ohzuku,et al.  Layered Lithium Insertion Material of LiNi1/2Mn1/2O2 : A Possible Alternative to LiCoO2 for Advanced Lithium-Ion Batteries , 2001 .

[56]  Y. Meng,et al.  Ultrathin Al2O3 Coatings for Improved Cycling Performance and Thermal Stability of LiNi0.5Co0.2Mn0.3O2 Cathode Material , 2016 .

[57]  P. Bruce,et al.  Structural transformation on cycling layered Li(Mn1−yCoy)O2 cathode materials , 1999 .

[58]  Junwei Jiang,et al.  The reactivity of delithiated Li(Ni1/3Co1/3Mn1/3)O2, Li(Ni0.8Co0.15Al0.05)O2 or LiCoO2 with non-aqueous electrolyte , 2007 .

[59]  John T. Vaughey,et al.  Synthesis, Characterization and Electrochemistry of Lithium Battery Electrodes: xLi2MnO3·(1 − x)LiMn0.333Ni0.333Co0.333O2 (0 ≤ x ≤ 0.7) , 2008 .

[60]  Yoshio Nishi,et al.  Performance of the First Lithium Ion Battery and Its Process Technology , 2007 .

[61]  G. Ceder,et al.  First-principles calculations on LixNiO2: phase stability and monoclinic distortion , 2003 .

[62]  Yunhong Zhou,et al.  Capacity Fading on Cycling of 4 V Li / LiMn2 O 4 Cells , 1997 .

[63]  H. A. Christopher,et al.  Lithium‐Aluminum Electrode , 1977 .

[64]  M. Whittingham,et al.  Electrical Energy Storage and Intercalation Chemistry , 1976, Science.

[65]  Gerbrand Ceder,et al.  Charge, Potential, and Phase Stability of Layered Li ( Ni0.5Mn0.5 ) O 2 , 2002 .

[66]  Yasunori Nishida,et al.  Synthesis and properties of gallium-doped LiNiO2 as the cathode material for lithium secondary batteries , 1997 .

[67]  D. Aurbach,et al.  Review on Li‐Sulfur Battery Systems: an Integral Perspective , 2015 .

[68]  T. Ohzuku,et al.  Comparative study of LiCoO2, LiNi12Co12O2 and LiNiO2 for 4 volt secondary lithium cells , 1993 .

[69]  T. Ohzuku,et al.  Lithium insertion material of LiNi 1/2Mn 1/2O 2 for advanced lithium-ion batteries , 2003 .

[70]  M. Whittingham,et al.  The lithium intercalates of the transition metal dichalcogenides , 1975 .

[71]  Richard T. Haasch,et al.  Surface Characterization of Electrodes from High Power Lithium-Ion Batteries , 2002 .

[72]  P. Bruce,et al.  Combined Neutron Diffraction, NMR, and Electrochemical Investigation of the Layered-to-Spinel Transformation in LiMnO2 , 2004 .

[73]  Jeff Dahn,et al.  Structure and electrochemistry of LixMnyNi1−yO2 , 1992 .

[74]  Fujio Izumi,et al.  VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data , 2011 .

[75]  Yongyao Xia,et al.  Enhancement on the Cycling Stability of the Layered Ni-Rich Oxide Cathode by In-Situ Fabricating Nano-Thickness Cation-Mixing Layers , 2016 .

[76]  M. Whittingham,et al.  Cathodic Behavior of Alkali Manganese Oxides from Permanganate , 1997 .

[77]  Changyin Jiang,et al.  Preparation and characterization of high-density spherical LiCoO2 cathode material for lithium ion batteries , 2004 .

[78]  T. Yang,et al.  Improvement of high-voltage cycling behavior of Li(Ni1/3Co1/3Mn1/3)O2 cathodes by Mg, Cr, and Al substitution , 2009 .

[79]  Yang Shao-Horn,et al.  Structural Characterization of Layered LiMnO2 Electrodes by Electron Diffraction and Lattice Imaging , 1999 .

[80]  P. Hagenmuller,et al.  Structural classification and properties of the layered oxides , 1980 .

[81]  D. D. MacNeil,et al.  Layered Cathode Materials Li [ Ni x Li ( 1 / 3 − 2x / 3 ) Mn ( 2 / 3 − x / 3 ) ] O 2 for Lithium-Ion Batteries , 2001 .

[82]  Evan M. Erickson,et al.  Synthesis and Electrochemical Performance of Nickel-Rich Layered-Structure LiNi0.65Co0.08Mn0.27O2 Cathode Materials Comprising Particles with Ni and Mn Full Concentration Gradients , 2016 .

[83]  John B. Goodenough,et al.  LixCoO2 (0, 1980 .

[84]  P. Manisankar,et al.  Synthesis, characterization and electrochemical studies of LiNi0·8M0·2O2 cathode material for rechargeable lithium batteries , 2008 .

[85]  Tsutomu Ohzuku,et al.  Novel lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries , 2003 .

[86]  Steven M. George,et al.  Enhanced Stability of LiCoO2 Cathodes in Lithium-Ion Batteries Using Surface Modification by Atomic Layer Deposition , 2010 .

[87]  Christopher S. Johnson,et al.  Electrochemical and Structural Properties of xLi2M‘O3·(1−x)LiMn0.5Ni0.5O2 Electrodes for Lithium Batteries (M‘ = Ti, Mn, Zr; 0 ≤ x ⩽ 0.3) , 2004 .

[88]  Yang‐Kook Sun,et al.  Effect of Residual Lithium Compounds on Layer Ni-Rich Li[Ni0.7Mn0.3]O2 , 2014 .

[89]  V. Manev,et al.  The LiNiO2 solid solution as a cathode material for rechargeable lithium batteries , 1995 .

[90]  Min Gyu Kim,et al.  Storage Characteristics of LiNi0.8Co0.1 + x Mn0.1 − x O2 (x = 0 , 0.03, and 0.06) Cathode Materials for Lithium Batteries , 2008 .

[91]  Ermete Antolini,et al.  LiCoO2: formation, structure, lithium and oxygen nonstoichiometry, electrochemical behaviour and transport properties , 2004 .

[92]  G. Ceder,et al.  The Stability of Orthorhombic and Monoclinic‐Layered LiMnO2 , 1999 .

[93]  E. Zhecheva,et al.  Stabilization of the layered crystal structure of LiNiO2 by Co-substitution , 1993 .

[94]  Liquan Chen,et al.  Comparison of structure and electrochemistry of Al- and Fe-doped LiNi1/3Co1/3Mn1/3O2 , 2006 .

[95]  C. Delmas,et al.  A new variety of LiMnO2 with a layered structure , 1996 .

[96]  Doron Aurbach,et al.  Electrode–solution interactions in Li-ion batteries: a short summary and new insights , 2003 .

[97]  C. Delmas,et al.  The cycling properties of the LixNi1-yCoyO2 electrode , 1993 .

[98]  T. Ohzuku,et al.  Electrochemistry and Structural Chemistry of LiNiO2 (R3̅m) for 4 Volt Secondary Lithium Cells , 1993 .

[99]  C. Delmas,et al.  Electrochemical and physical properties of the LixNi1$minus;yCoyO2 phases , 1992 .

[100]  C. Delmas,et al.  Lithium/vacancy ordering in the monoclinic LixNiO2 (0.50≤x≤0.75) solid solution , 1999 .

[101]  Jeff Dahn,et al.  Studies of Lithium Intercalation into Carbons Using Nonaqueous Electrochemical Cells , 1990 .

[102]  Jun Ho Song,et al.  Improved electrochemical and thermal properties of nickel rich LiNi 0.6 Co 0.2 Mn 0.2 O 2 cathode materials by SiO 2 coating , 2015 .

[103]  Jeff Dahn,et al.  Structure and electrochemistry of Li1±yNiO2 and a new Li2NiO2 phase with the Ni (OH)2 structure , 1990 .

[104]  B. Polzin,et al.  Functioning Mechanism of AlF3 Coating on the Li- and Mn-Rich Cathode Materials , 2014 .

[105]  I. Staffell,et al.  Current status of hybrid, battery and fuel cell electric vehicles: From electrochemistry to market prospects , 2012 .

[106]  M. Yoshio,et al.  Lithium-ion batteries , 2009 .

[107]  D. D. MacNeil,et al.  The Reaction of Charged Cathodes with Nonaqueous Solvents and Electrolytes: I. Li0.5CoO2 , 2001 .

[108]  L. Croguennec,et al.  Electrochemical Cyclability of Orthorhombic LiMnO2 Characterization of Cycled Materials , 1997 .

[109]  G. Prado,et al.  Lithium batteries: a new tool in solid state chemistry , 1999 .

[110]  Doron Aurbach,et al.  New Horizons for Conventional Lithium Ion Battery Technology. , 2014, The journal of physical chemistry letters.

[111]  Zhaolin Liu,et al.  Synthesis and characterization of LiNi1−x−yCoxMnyO2 as the cathode materials of secondary lithium batteries , 1999 .

[112]  Baojun Chen,et al.  An approach to application for LiNi0.6Co0.2Mn0.2O2 cathode material at high cutoff voltage by TiO2 coating , 2014 .