Comparison of digital models generated from three-dimensional optical scanner and cone beam computed tomography

*Correspondence to: Won-Jin Yi Professor, Department of Oral and Maxillofacial Radiology, Dental Research Institute, College of Dentistry, Seoul National University, 101 Daehak-ro, Jongnogu, Seoul, 03080, Republic of Korea Tel: +82-2-2072-3049, Fax: +82-2-744-3919, E-mail: wjyi@snu.ac.kr Received: February 22, 2016/Last Revision: March 16, 2016/Accepted: March 16, 2016 comparison of digital models generated from three-dimensional optical scanner and cone beam computed tomography

[1]  Florian Beuer,et al.  Precision of fit: zirconia three-unit fixed dental prostheses , 2009, Clinical Oral Investigations.

[2]  R P Chappell,et al.  Marginal fit of porcelain-fused-to-metal and two types of ceramic crown. , 1990, The Journal of prosthetic dentistry.

[3]  Scott D Ganz,et al.  Use of Cone Beam Computed Tomography and a Laser Intraoral Scanner in Virtual Dental Implant Surgery: Part 1 , 2012, Implant dentistry.

[4]  J Martin Palomo,et al.  Reliability and accuracy of cone-beam computed tomography dental measurements. , 2009, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[5]  Thomas J Cangialosi,et al.  Comparison of space analysis evaluations with digital models and plaster dental casts. , 2009, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[6]  S. Zhao,et al.  X-ray CT metal artifact reduction using wavelets: an application for imaging total hip prostheses , 2000, IEEE Transactions on Medical Imaging.

[7]  G H Johnson,et al.  Marginal adaptation of castable ceramic crowns. , 1991, The Journal of prosthetic dentistry.

[8]  Sandro Barone,et al.  Integration of 3D anatomical data obtained by CT imaging and 3D optical scanning for computer aided implant surgery , 2011, BMC Medical Imaging.

[9]  S. Di Carlo,et al.  Comparison of Conventional Methods and Laser-Assisted Rapid Prototyping for Manufacturing Fixed Dental Prostheses: An In Vitro Study , 2015, BioMed research international.

[10]  P. Proussaefs.  Crowns cemented on crown preparations lacking geometric resistance form. Part II: effect of cement. , 2004, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[11]  Sebastian B. M. Patzelt,et al.  Accuracy of computer-aided design/computer-aided manufacturing-generated dental casts based on intraoral scanner data. , 2014, Journal of the American Dental Association.

[12]  C. Clercq,et al.  A cone-beam CT based technique to augment the 3D virtual skull model with a detailed dental surface. , 2009, International journal of oral and maxillofacial surgery.

[13]  K Hero Breuning,et al.  Dental models made with an intraoral scanner: a validation study. , 2012, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[14]  S.-H. Kang,et al.  Dental image replacement on cone beam computed tomography with three-dimensional optical scanning of a dental cast, occlusal bite, or bite tray impression. , 2014, International journal of oral and maxillofacial surgery.

[15]  R. Cibrián,et al.  A comparison between dental measurements taken from CBCT models and those taken from a digital method. , 2013, European journal of orthodontics.

[16]  G. Christensen.  Marginal fit of gold inlay castings. , 1966, The Journal of prosthetic dentistry.

[17]  Peter Yaman,et al.  Marginal adaptation and color stability of four provisional materials. , 2008, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[18]  S. Nikzad,et al.  The evolution of rapid prototyping in dentistry: a review , 2009 .

[19]  J. Mclean,et al.  The estimation of cement film thickness by an in vivo technique , 1971, British Dental Journal.

[20]  A Jäger,et al.  Construction and testing of a computer-based intraoral laser scanner for determining tooth positions. , 2000, Medical engineering & physics.

[21]  S Karlsson,et al.  The fit of Procera titanium crowns. An in vitro and clinical study. , 1993, Acta odontologica Scandinavica.

[22]  Milan Sonka,et al.  3D Slicer as an image computing platform for the Quantitative Imaging Network. , 2012, Magnetic resonance imaging.

[23]  U Hägg,et al.  Virtual model analysis as an alternative approach to plaster model analysis: reliability and validity. , 2010, European journal of orthodontics.

[24]  Mi young Lim,et al.  Comparison of model analysis measurements among plaster model, laser scan digital model, and cone beam CT image , 2009 .

[25]  Albert Mehl,et al.  Accuracy of complete-arch dental impressions: a new method of measuring trueness and precision. , 2013, The Journal of prosthetic dentistry.

[26]  A. Kato,et al.  Construction of three-dimensional tooth model by micro-computed tomography and application for data sharing , 2009, Clinical Oral Investigations.

[27]  Erwin Keeve,et al.  Geometric accuracy of a newly developed cone-beam device for maxillofacial imaging. , 2007, Oral surgery, oral medicine, oral pathology, oral radiology, and endodontics.

[28]  Heidi B. Aaronson,et al.  Dental impressions using 3D digital scanners: virtual becomes reality. , 2008, Compendium of continuing education in dentistry.

[29]  M I MacEntee,et al.  Fit of three porcelain-fused-to-metal marginal designs in vivo: a scanning electron microscope study. , 1985, The Journal of prosthetic dentistry.