Thermal performance evaluation of a compact two-fluid finned heat exchanger integrated with cold latent heat energy storage

[1]  S. Memon,et al.  Forecasting energy demand of PCM integrated residential buildings: A machine learning approach , 2023, Journal of Building Engineering.

[2]  Y. Diao,et al.  Thermal performance of cold thermal energy storage system with fin and fin–foam structures , 2023, Applied Thermal Engineering.

[3]  S. Zendehboudi,et al.  Multiphysics CFD Modeling to Assess Performance of a Perforated Multi-Plate Indirect Solar Dryer with a V-Corrugated Absorber Surface , 2023, Applied Thermal Engineering.

[4]  Meryem Terhan,et al.  Investigation of used PCM-integrated into building exterior walls for energy savings and optimization of PCM melting temperatures , 2023, Construction and Building Materials.

[5]  L. Gu,et al.  Numerical study on conjugate heat transfer in a liquid-metal-cooled pipe based on a four-equation turbulent heat transfer model , 2023, Nuclear Engineering and Technology.

[6]  A. Fartaj,et al.  Numerical thermal performance analysis of a PCM-to-air and liquid heat exchanger implementing latent heat thermal energy storage , 2023, Journal of Energy Storage.

[7]  F. Su,et al.  Optimum orthogonally structured fins in charging enhancement of phase change materials (PCMs): PCMs’ thermophysical properties effects , 2023, International Journal of Thermal Sciences.

[8]  S. Zendehboudi,et al.  CFD modeling and performance evaluation of an open-aperture partially evacuated receiver with internal twisted inserts in solar PTCs: energy and exergy analysis , 2023, Environmental Science and Pollution Research.

[9]  F. Pennec,et al.  Experimental study of solid-liquid phase change in the presence of supercooling and natural convection , 2023, International Journal of Thermal Sciences.

[10]  S. Mazari,et al.  MXene-based phase change materials for solar thermal energy storage , 2022, Energy Conversion and Management.

[11]  A. Mohammadi,et al.  Novel thermoelectric generator heat exchanger for indirect heat recovery from molten CuCl in the thermochemical Cu–Cl cycle of hydrogen production , 2022, International Journal of Hydrogen Energy.

[12]  A. Fartaj,et al.  Transient experimental study of a latent heat thermal energy storage in a heat exchanger for effective thermal management , 2022, Journal of Energy Storage.

[13]  Qiuwan Wang,et al.  Heat transfer enhancement of phase change materials embedded with metal foam for thermal energy storage: A review , 2022, Renewable and Sustainable Energy Reviews.

[14]  Zhenjun Ma,et al.  Experimental study on heat transfer characteristics of metal foam/paraffin composite PCMs in large cavities: Effects of material types and heating configurations , 2022, Applied Energy.

[15]  G. Ziskind,et al.  Experimental and numerical evaluation of phase-change material performance in a vertical cylindrical capsule for thermal energy storage , 2022, Applied Thermal Engineering.

[16]  M. Cheralathan,et al.  Charging and discharging processes of low capacity nano-PCM based cool thermal energy storage system: An experimental study , 2022, Energy.

[17]  Jianning Ding,et al.  Experimental and numerical investigation of a hybrid battery thermal management system based on copper foam- paraffin composite phase change material and liquid cooling , 2022, Applied Thermal Engineering.

[18]  P. Kumari,et al.  Strategies for phase change material application in latent heat thermal energy storage enhancement: Status and prospect , 2022, Journal of Energy Storage.

[19]  Srinivas Singirikonda,et al.  Adaptive secondary loop liquid cooling with refrigerant cabin active thermal management system for electric vehicle , 2022, Journal of Energy Storage.

[20]  M. Bady,et al.  Investigation of an Innovative Canadian Well System Combined with a Frozen Water/PCM Heat Exchanger for Air-Cooling in Hot Climate , 2022, Applied Thermal Engineering.

[21]  I. Lagaris,et al.  Effect of fins and nanoparticles in the discharge performance of PCM thermal storage system with a multi pass finned tube heat exchange , 2022, Applied Thermal Engineering.

[22]  N. Bianco,et al.  Enhancing PCMs Thermal Conductivity: A Comparison Among Porous Metal Foams, Nanoparticles and Finned Surfaces in Triplex Tube Heat Exchangers , 2022, Applied Thermal Engineering.

[23]  Shuli Liu,et al.  Investigation on the cooling performance of a buoyancy driven earth-air heat exchanger system and the impact on indoor thermal environment , 2022, Applied Thermal Engineering.

[24]  Li Li,et al.  Compact latent heat exchanger for the fast supply of hot water with serpentine tubes in shape-stabilized composite phase change material and auxiliary electric heating , 2022, Applied Thermal Engineering.

[25]  M. Ghalambaz,et al.  Simultaneous and consecutive charging and discharging of a PCM-based domestic air heater with metal foam , 2021 .

[26]  A. Sohani,et al.  A high-resolution daily experimental performance evaluation of a large-scale industrial vapor-compression refrigeration system based on real-time IoT data monitoring technology , 2021 .

[27]  Vahid Madadi Avargani,et al.  Integrating paraffin phase change material in the storage tank of a solar water heater to maintain a consistent hot water output temperature , 2021 .

[28]  A. Fartaj,et al.  Transient experimental investigation of airside heat transfer in a crossflow heat exchanger , 2021, Applied Thermal Engineering.

[29]  A. Rachek,et al.  Numerical investigation and experimental validation of the thermal performance enhancement of a compact finned-tube heat exchanger for efficient latent heat thermal energy storage , 2021, Journal of Cleaner Production.

[30]  L. Cabeza,et al.  Thermal energy storage (TES) with phase change materials (PCM) in solar power plants (CSP). Concept and plant performance , 2019, Applied Energy.

[31]  S. Chamoli,et al.  Recent advancement in heat transfer and fluid flow characteristics in cross flow heat exchangers , 2019, Renewable and Sustainable Energy Reviews.

[32]  Lokesh Kalapala,et al.  Influence of operational and design parameters on the performance of a PCM based heat exchanger for thermal energy storage – A review , 2018, Journal of Energy Storage.

[33]  A. Fartaj,et al.  Transient response of a meso heat exchanger with temperature step variation , 2018, International Journal of Heat and Mass Transfer.

[34]  A. Fartaj,et al.  Experimental transient response of a minichannel heat exchanger with step flow variation , 2017 .

[35]  Li Jia,et al.  Paraffin and paraffin/aluminum foam composite phase change material heat storage experimental study based on thermal management of Li-ion battery , 2015 .

[36]  Vaughan R Voller,et al.  ENTHALPY-POROSITY TECHNIQUE FOR MODELING CONVECTION-DIFFUSION PHASE CHANGE: APPLICATION TO THE MELTING OF A PURE METAL , 1988 .