Study of the optimal pulse current discharging frequency of the Li-ion battery

In this paper, the AC impedance analysis is used to explore the optimal discharging frequency for a Li-ion battery. Experiments indicate that the optimal discharging frequency is at the minimum AC impedance frequency fZmin for a conventional pulse current (PC) discharging This PC discharging strategy improves the discharging time, the discharging efficiency, and the minimum rising temperature of the Li-ion battery by about 0.9%, 0.9%, and 15.8%, respectively, as compared with the traditional constant-current (CC) discharging.

[1]  Jin Wang,et al.  High current battery impedance testing for power electronics circuit design , 2009, 2009 IEEE Vehicle Power and Propulsion Conference.

[2]  S. Rodrigues,et al.  AC impedance and state-of-charge analysis of a sealed lithium-ion rechargeable battery , 1999 .

[3]  Pascal Venet,et al.  Study of Accelerated Aging of Supercapacitors for Transport Applications , 2010, IEEE Transactions on Industrial Electronics.

[4]  Radu Marculescu,et al.  Hierarchical adaptive dynamic power management , 2004, Proceedings Design, Automation and Test in Europe Conference and Exhibition.

[5]  Yi-Hwa Liu,et al.  Search for an Optimal Five-Step Charging Pattern for Li-Ion Batteries Using Consecutive Orthogonal Arrays , 2011, IEEE Transactions on Energy Conversion.

[6]  Chunbo Zhu,et al.  State-of-Charge Determination From EMF Voltage Estimation: Using Impedance, Terminal Voltage, and Current for Lead-Acid and Lithium-Ion Batteries , 2007, IEEE Transactions on Industrial Electronics.

[7]  Bernard Davat,et al.  Energy Management of a Fuel Cell/Supercapacitor/Battery Power Source for Electric Vehicular Applications , 2011, IEEE Transactions on Vehicular Technology.

[8]  Liang-Rui Chen,et al.  A Design of an Optimal Battery Pulse Charge System by Frequency-Varied Technique , 2007, IEEE Transactions on Industrial Electronics.

[9]  Jingxian Yu,et al.  The effects of pulse charging on inner pressure and cycling characteristics of sealed Ni/MH batteries , 2004 .

[10]  Yi-Hwa Liu,et al.  Search for an Optimal Rapid-Charging Pattern for Li-Ion Batteries Using the Taguchi Approach , 2010, IEEE Transactions on Industrial Electronics.

[11]  B. Scrosati,et al.  An electrochemical impedance spectroscopic study of the transport properties of LiNi0.75Co0.25O2 , 1999 .

[12]  R. Spotnitz,et al.  AC impedance simulation for lithium-ion cells , 2000, Fifteenth Annual Battery Conference on Applications and Advances (Cat. No.00TH8490).

[13]  Hamid Sharif,et al.  Modeling Discharge Behavior of Multicell Battery , 2010, IEEE Transactions on Energy Conversion.

[14]  F. Huet.  A review of impedance measurements for determination of the state-of-charge or state-of-health of secondary batteries , 1998 .

[15]  Liang-Rui Chen,et al.  Design of Duty-Varied Voltage Pulse Charger for Improving Li-Ion Battery-Charging Response , 2009, IEEE Trans. Ind. Electron..

[16]  Kang G. Shin,et al.  Scheduling of Battery Charge, Discharge, and Rest , 2009, 2009 30th IEEE Real-Time Systems Symposium.

[17]  Liang-Rui Chen,et al.  A Design of a Grey-Predicted Li-Ion Battery Charge System , 2008, IEEE Transactions on Industrial Electronics.

[18]  Masatoshi Uno,et al.  Accelerated Charge–Discharge Cycling Test and Cycle Life Prediction Model for Supercapacitors in Alternative Battery Applications , 2012, IEEE Transactions on Industrial Electronics.

[19]  Rik W. De Doncker,et al.  Impedance-based simulation models of supercapacitors and Li-ion batteries for power electronic applications , 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..

[20]  A. Chih-Chiang Hua,et al.  Charge and discharge characteristics of lead-acid battery and LiFePO4 battery , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

[21]  Li Ran,et al.  Prediction of state of charge of Lithium-ion rechargeable battery with electrochemical impedance spectroscopy theory , 2010, 2010 5th IEEE Conference on Industrial Electronics and Applications.

[22]  Lihua Chen,et al.  A high frequency battery model for current ripple analysis , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[23]  C.S. Moo,et al.  Intermittent Discharging for Lead-Acid Batteries , 2007, 2007 Power Conversion Conference - Nagoya.

[24]  Jih-Sheng Lai,et al.  A high-efficiency grid-tie battery energy storage system , 2011, IEEE Transactions on Power Electronics.

[25]  Jiann-Jong Chen,et al.  A High-Efficiency Multimode Li–Ion Battery Charger With Variable Current Source and Controlling Previous-Stage Supply Voltage , 2009, IEEE Transactions on Industrial Electronics.

[26]  Deyang Qu,et al.  The ac impedance studies for porous MnO2 cathode by means of modified transmission line model , 2001 .

[27]  Xiaomin Xiang,et al.  Study of a battery grid-connected discharging system which based on Boost converter , 2011, 2011 International Conference on Electrical and Control Engineering.

[28]  Shuangdong Zhu,et al.  The Research on Detection Method of Battery Discharge , 2011, 2011 Second International Conference on Digital Manufacturing & Automation.

[29]  Liang-Rui Chen,et al.  Improving Phase-Locked Battery Charger Speed by Using Resistance-Compensated Technique , 2009, IEEE Trans. Ind. Electron..

[30]  Gia-Yo Han,et al.  Current-Pumped Battery Charger , 2008, IEEE Transactions on Industrial Electronics.

[31]  Christopher D. Rahn,et al.  Model-Based Electrochemical Estimation and Constraint Management for Pulse Operation of Lithium Ion Batteries , 2010, IEEE Transactions on Control Systems Technology.

[32]  Frank C. Walsh,et al.  Energy and Battery Management of a Plug-In Series Hybrid Electric Vehicle Using Fuzzy Logic , 2011, IEEE Transactions on Vehicular Technology.

[33]  Liang-Rui Chen,et al.  Phase-Locked Bidirectional Converter With Pulse Charge Function for 42-V/14-V Dual-Voltage PowerNet , 2011, IEEE Transactions on Industrial Electronics.

[34]  Issa Batarseh,et al.  A Review of Charging Algorithms for Nickel and Lithium Battery Chargers , 2011, IEEE Transactions on Vehicular Technology.

[35]  Ke-Horng Chen,et al.  A Li-Ion Battery Charger With Smooth Control Circuit and Built-In Resistance Compensator for Achieving Stable and Fast Charging , 2010, IEEE Transactions on Circuits and Systems I: Regular Papers.

[36]  M. Hejabi,et al.  Estimation of the kinetic parameters of processes at the negative plate of lead-acid batteries by impedance studies , 2010 .

[37]  Woei-Luen Chen,et al.  Active Voltage and Frequency Regulator Design for a Wind-Driven Induction Generator to Alleviate Transient Impacts on Power Grid , 2013, IEEE Transactions on Industrial Electronics.

[38]  Ruey-Hsun Liang,et al.  Design of a Reflex-Based Bidirectional Converter With the Energy Recovery Function , 2008, IEEE Transactions on Industrial Electronics.

[39]  Ying-Chun Chuang,et al.  High-Efficiency ZCS Buck Converter for Rechargeable Batteries , 2010, IEEE Transactions on Industrial Electronics.

[40]  K.S. Ng,et al.  Investigation on intermittent discharging for lead-acid batteries , 2008, 2008 IEEE Power Electronics Specialists Conference.

[41]  Yoshitsugu Sone,et al.  Cycle-life testing of large-capacity lithium-ion cells in simulated satellite operation , 2006 .

[42]  Min Chen,et al.  Accurate electrical battery model capable of predicting runtime and I-V performance , 2006, IEEE Transactions on Energy Conversion.