In-situ experiment tests and particulate simulations on powder paving process of additive manufacturing

[1]  Huamin Zhou,et al.  Numerical simulation of the flow behavior and powder spreading mechanism in powder bed-based additive manufacturing , 2021, Powder Technology.

[2]  Q. Wei,et al.  Dynamics of short fiber/polymer composite particles in paving process of additive manufacturing , 2021 .

[3]  A. Yu,et al.  Powder deposition mechanism during powder spreading with different spreader geometries in powder bed fusion additive manufacturing , 2021, Powder Technology.

[4]  A. Demir,et al.  Single point exposure LPBF for the production of biodegradable Zn-alloy lattice structures , 2021, Additive Manufacturing.

[5]  Q. Wei,et al.  Two-step heat treatment for laser powder bed fusion of a nickel-based superalloy with simultaneously enhanced tensile strength and ductility , 2021 .

[6]  Kaifei Zhang,et al.  Powder-spreading dynamics and packing quality improvement for laser powder bed fusion additive manufacturing , 2021 .

[7]  X. An,et al.  Numerical insights on the spreading of practical 316 L stainless steel powder in SLM additive manufacturing , 2021 .

[8]  Zheng Chen,et al.  Effects of obstacle's curvature on shock dynamics of gravity-driven granular flows impacting a circular cylinder , 2021 .

[9]  C. Davies,et al.  The effect of recoater geometry and speed on granular convection and size segregation in powder bed fusion , 2021, Powder Technology.

[10]  W. Tillmann,et al.  Coatability of diamond-like carbon on 316L stainless steel printed by binder jetting , 2021 .

[11]  Shengqiang Jiang,et al.  Comparison of roller-spreading and blade-spreading processes in powder-bed additive manufacturing by DEM simulations , 2021, Particuology.

[12]  A. Yu,et al.  Effects of spreader geometry on powder spreading process in powder bed additive manufacturing , 2021 .

[13]  E. Olevsky,et al.  Modeling of effect of powder spreading on green body dimensional accuracy in additive manufacturing by binder jetting , 2021 .

[14]  K. Dong,et al.  Dynamic investigation on the powder spreading during selective laser melting additive manufacturing , 2020 .

[15]  Shane J. Burns,et al.  Critical time step for discrete element method simulations of convex particles with central symmetry , 2020, International Journal for Numerical Methods in Engineering.

[16]  Wentao Yan,et al.  Packing quality of powder layer during counter-rolling-type powder spreading process in additive manufacturing , 2020 .

[17]  V. Zivkovic,et al.  Compaction and dilatancy of irregular particles avalanche flow in rotating drum operated in slumping regime , 2020 .

[18]  L. Wang,et al.  Adhesion effects on spreading of metal powders in selective laser melting , 2020 .

[19]  Wenguang Nan,et al.  Numerical simulation of particle flow and segregation during roller spreading process in additive manufacturing , 2020, Powder Technology.

[20]  Wentao Yan,et al.  Powder-spreading mechanisms in powder-bed-based additive manufacturing: Experiments and computational modeling , 2019, Acta Materialia.

[21]  A. Chiba,et al.  Molten pool behavior and effect of fluid flow on solidification conditions in selective electron beam melting (SEBM) of a biomedical Co-Cr-Mo alloy , 2019, Additive Manufacturing.

[22]  Wenguang Nan,et al.  Numerical simulation of powder flow during spreading in additive manufacturing , 2019, Powder Technology.

[23]  L. Duan,et al.  Comparisons on microstructure, mechanical and corrosion resistant property of S136 mold steel processed by selective laser melting from two pre-alloy powders with trace element differences , 2018, Optics & Laser Technology.

[24]  Wenguang Nan,et al.  Jamming during particle spreading in additive manufacturing , 2018, Powder Technology.

[25]  Li Yang,et al.  Process development for green part printing using binder jetting additive manufacturing , 2018 .

[26]  Wolfgang A. Wall,et al.  Critical Influences of Particle Size and Adhesion on the Powder Layer Uniformity in Metal Additive Manufacturing , 2018, Journal of Materials Processing Technology.

[27]  Zhongwei Li,et al.  Flow behavior of powder particles in layering process of selective laser melting: Numerical modeling and experimental verification based on discrete element method , 2017 .

[28]  Sina Haeri,et al.  Optimisation of blade type spreaders for powder bed preparation in Additive Manufacturing using DEM simulations , 2017 .

[29]  Feng Lin,et al.  Multi-physics modeling of single/multiple-track defect mechanisms in electron beam selective melting , 2017 .

[30]  Kevin J. Hanley,et al.  A Methodical Calibration Procedure for Discrete Element Models , 2017 .

[31]  Marc Holmes,et al.  Powder Bed Layer Characteristics: The Overseen First-Order Process Input , 2016, Metallurgical and Materials Transactions A.

[32]  Etienne Barthel,et al.  Adhesive elastic contacts: JKR and more , 2008 .

[33]  Yutaka Tsuji,et al.  Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe , 1992 .

[34]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[35]  S. Haeri,et al.  Discrete element simulation and experimental study of powder spreading process in additive manufacturing , 2017 .