Preparation of mullite whiskers reinforced SiC/Al2O3 composites by microwave sintering

Mullite whiskers reinforced SiC/Al2O3 composites were prepared by microwave sintering in a microwave chamber with TE 666 resonant mode. Original SiC particles were coated with SiO2 using sol-gel processing and mixed with Al2O3 particles. Mullite was formed in the reaction between SiO2 and Al2O3. The isostatically pressed cylindrical pellets were sintered from 1350 °C to 1600 °C for 30 min. Physical and chemical responses were investigated by detecting changes in reflected power during the microwave sintering process. XRD was carried out to characterize the samples and showed that mullite could be formed at 1200 °C. Bridging of mullite whiskers between Al2O3 and SiC particles was observed by SEM and is due to a so-called local hot spot effect, which was the unique feature for microwave sintering. The optimized microwave sintering temperature was 1500 °C corresponding to the maximum amount of mullite whiskers within SiC/Al2O3 composites. The high electro-magnetic field enhanced the decomposition of mullite at higher temperatures above 1550 °C. The mechanical properties of mullite whiskers reinforced SiC/Al2O3 composites are much better than the SiC/Al2O3 composites without mullite whiskers.

[1]  Lidong Li,et al.  Template free synthesis of highly ordered mullite nanowhiskers with exceptional photoluminescence , 2015 .

[2]  Jianfeng Yang,et al.  Preparation and characterization of continuous alumina based fiber reinforced with orientated mullite whisker , 2015 .

[3]  B. Fan,et al.  Rapid densification of SiC ceramic rollers by microwave sintering , 2015 .

[4]  B. Fan,et al.  Preparation of m-ZrO2 compacts by microwave sintering , 2014 .

[5]  G. Qiao,et al.  Molten salt synthesis of mullite whiskers on the surface of SiC ceramics , 2014 .

[6]  Yuancheng Teng,et al.  Microstructure and mechanical properties of high-pressure sintered Al2O3/SiC nanocomposites , 2013 .

[7]  J. Molimard,et al.  Densification and thermal gradient evolution of alumina during microwave sintering at 2.45 GHz , 2013 .

[8]  E. Olevsky,et al.  Microwave Sintering: Fundamentals and Modeling , 2013 .

[9]  Jinhui Peng,et al.  Effects of in situ synthesized mullite whiskers on flexural strength and fracture toughness of corundum-mullite refractory materials , 2013 .

[10]  R. M. Khattab,et al.  Thermo-mechanical properties of mullite/zirconia reinforced alumina ceramic composites , 2012 .

[11]  Nick Serpone,et al.  On the Generation of Hot-Spots by Microwave Electric and Magnetic Fields and Their Impact on a Microwave-Assisted Heterogeneous Reaction in the Presence of Metallic Pd Nanoparticles on an Activated Carbon Support , 2011 .

[12]  M. Cologna,et al.  Influence of Externally Imposed and Internally Generated Electrical Fields on Grain Growth, Diffusional Creep, Sintering and Related Phenomena in Ceramics , 2011 .

[13]  Xiaolei Shi,et al.  Mechanical properties of hot-pressed Al2O3/SiC composites , 2010 .

[14]  Morteza Oghbaei,et al.  Microwave versus Conventional Sintering: A Review of Fundamentals, Advantages and Applications , 2010 .

[15]  R. Kiminami,et al.  Microwave sintering of alumina–zirconia nanocomposites , 2008 .

[16]  Xiaoming Chen,et al.  Effects of Y2O3 addition on microwave dielectric characteristics of Al2O3 ceramics , 2007 .

[17]  T. Basak,et al.  Role of ceramic supports on microwave heating of materials , 2005 .

[18]  R. Chen,et al.  Mechanical properties of Al2O3/ZrO2 composites , 2002 .

[19]  J. Yeomans,et al.  Processing and mechanical properties of Al2O3–5 vol.% Cr nanocomposites , 2002 .

[20]  D. Jiang,et al.  Pinning effect of SiC particles on mechanical properties of Al2O3–SiC ceramic matrix composites , 1998 .

[21]  Suxing Wu,et al.  Reaction Bonding and Mechanical Properties of Mullite/Silicon Carbide Composites , 1994 .

[22]  R. Cook,et al.  Mechanical behavior of alumina-silicon carbide «Nanocomposites» , 1993 .

[23]  R. Kiminami,et al.  Effect of Y2O3 additive on conventional and microwave sintering of mullite , 2011 .

[24]  L. Gao,et al.  Mechanical properties and electrical conductivity of TiN-Al2O3 nanocomposites , 2003 .

[25]  Chun Cheng,et al.  Mechanical properties of Al 2O 3/ZrO 2 composites , 2002 .

[26]  F. Gnanam,et al.  Influence of MnO and TiO2 additives on density, microstructure and mechanical properties of Al2O3 , 2002 .

[27]  A. Samanta,et al.  Near net shape SiC–mullite composites from a powder precursor prepared through an intermediate Al-hydroxyhydrogel , 2001 .

[28]  K. Niihara,et al.  Microstructure and mechanical properties of pressureless sintered Al2O3/Sic nanocomposites , 1997 .

[29]  Byung-Hoon Kim,et al.  Fabrication of fiber-reinforced porous ceramics of Al2O3-mullite and SiC-mullite systems , 1995 .