AbstractGoal, Scope and Background The goal of this study is to determine the environmental impact of using one cubic metre of water in the Walloon Region. The whole anthropogenic water cycle is analysed, from the pumping stations to the wastewater treatment plants. The functional unit has been defined as one cubic metre of water at the consumer tap. This study was carried out in the context of the EU Water Framework Directive. It is part of a programme called PIRENE launched by the Walloon Region to fulfil the requirements of this Directive.Methods A model of the whole anthropogenic water cycle in the Walloon Region was developed. The model is mainly based on site-specific data given by the companies working in the field of water production and wastewater treatment. It was used to assess the environmental impact from the pumping station to the wastewater treatment plant using the Eco-Indicator 99 methodology. Eco-Indicator 99 has been adapted in order to better take into account environmental impact of acidification and eutrophication. Characterisation factors have been calculated for COD, nitrogen and phosphate emissions. From the reference model, different scenarios have been elaborated.Results and Discussion
On the basis of the inventory, the environmental impact of five scenarios has been evaluated. Acidification and eutrophication is the most important impact category. It is mainly caused by the wastewater that is discharged without any treatment, but also by the effluent of the wastewater treatment plant. So, this impact category has the lowest environmental load when the wastewater treatment rate is high. For the other impact categories, the impact generally increases with the wastewater treatment rate. During wastewater treatment, energy and chemicals are indeed consumed to improve the quality of the final outputs, and thus to reduce the environmental impact related to acidification and eutrophication. A comparison between the scenarios has also shown that the building of the sewer network has a significant contribution to the global environmental load and that the stages before the tap contribute less to the environmental impact than the stage after the tap. Conclusions
The three stages that contribute significantly to the global environmental load are: water discharge, wastewater treatment operation and, to a lesser extent, the sewer system. The results show that the wastewater treatment rate must be as high as possible, using either collective or individual wastewater treatment plants. Even a small water discharge without any treatment has a significant environmental impact. Operation of the wastewater treatment plants must also be improved to reduce the environmental impact caused by the effluent of the plants. For new wastewater treatment plants, building plants treating nitrogen and phosphorus should be encouraged. A sensitivity analysis was conducted and showed that the results of the study were not very affected by a modification of key parameters. Impact assessment using the CML methodology has confirmed the results obtained with Eco-Indicator 99.
[1]
R Otterpohl,et al.
Developing a model based decision support tool for the identification of sustainable treatment options for domestic wastewater.
,
2001,
Water science and technology : a journal of the International Association on Water Pollution Research.
[2]
Gerald Rebitzer,et al.
IMPACT 2002+: A new life cycle impact assessment methodology
,
2003
.
[3]
A. Tillman,et al.
Life cycle assessment of municipal waste water systems
,
1998
.
[4]
Olivier Jolliet,et al.
Life cycle assessment of processes for the treatment of wastewater urban sludge: energy and global warming analysis
,
2005
.
[5]
Patrick Rousseaux,et al.
An LCA of alternative wastewater sludge treatment scenarios
,
2002
.
[6]
M. Goedkoop,et al.
The Eco-indicator 99, A damage oriented method for Life Cycle Impact Assessment
,
1999
.
[7]
Göran Finnveden,et al.
Eutrophication as an impact category
,
1999
.
[8]
M. T. Moreira,et al.
Environmental performance of a municipal wastewater treatment plant
,
2004
.
[9]
Gerald Rebitzer,et al.
The LCIA midpoint-damage framework of the UNEP/SETAC life cycle initiative
,
2004
.