Experimental trends in polymer nanocomposites—a review
暂无分享,去创建一个
Karl I. Jacob | M. A. Sharaf | Rina Tannenbaum | Iwona Jasiuk | K. Jacob | R. Tannenbaum | I. Jasiuk | M. Sharaf | J. Jordan | Jeffrey Jordan
[1] K. Wei,et al. Mechanical properties of clay-polyimide (BTDA-ODA) nanocomposites via ODA-modified organoclay , 2000 .
[2] Anuvat Sirivat,et al. Preparation, structure, properties and thermal behavior of rigid-rod polyimide/montmorillonite nanocomposites , 2001 .
[3] F. Chang,et al. Preparation and characterization of polystyrene–clay nanocomposites by free‐radical polymerization , 2002 .
[4] J. Keum,et al. Deformation Behavior of Polyethylene/Silicate Nanocomposites As Studied by Real-Time Wide-Angle X-ray Scattering , 2002 .
[5] Zhao-Xia Guo,et al. The influence of silane treatment on nylon 6/nano-SiO2 in situ polymerization , 2002 .
[6] P. Ajayan,et al. Mechanical behavior of polymer and ceramic matrix nanocomposites , 2001 .
[7] V. Altstädt,et al. Effect of Sample Thickness on the Mechanical Properties of Injection-molded Polyamide-6 and Polyamide-6 Clay Nanocomposites , 2003 .
[8] L. Schadler,et al. Investigation into the Thermal and Mechanical Behavior of PMMA/Alumina Nanocomposites , 2000 .
[9] J. Lee,et al. Preparing PP/clay nanocomposites using a swelling agent , 2004 .
[10] H. Akita,et al. Studies on molecular composite. II. Processing of molecular composites using copolymers consisting of a precursor of poly(p‐phenylene benzobisthiazole) and aromatic polyamide , 1999 .
[11] Richard W. Siegel,et al. Glass transition behavior of alumina/polymethylmethacrylate nanocomposites , 2002 .
[12] J. S. Shelley,et al. Reinforcement and environmental degradation of nylon-6/clay nanocomposites , 2001 .
[13] M. Boyce,et al. Multiscale micromechanical modeling of polymer/clay nanocomposites and the effective clay particle , 2004 .
[14] J. Jog,et al. Poly(vinylidene fluoride)/clay nanocomposites prepared by melt intercalation: Crystallization and dynamic mechanical behavior studies , 2002 .
[15] O. Park,et al. The fabrication of syndiotactic polystyrene/organophilic clay nanocomposites and their properties , 2001 .
[16] O. Park,et al. Thermal and mechanical properties of syndiotactic polystyrene/organoclay nanocomposites with different microstructures , 2004 .
[17] S. Friedlander,et al. Elastic behavior of nanoparticle chain aggregates: A hypothesis for polymer–filler behavior , 2000 .
[18] E. Chiellini,et al. Structural characterization and transport properties of organically modified montmorillonite/polyurethane nanocomposites , 2002 .
[19] L. J. Lee,et al. Poly(methyl methacrylate) and polystyrene/clay nanocomposites prepared by in-situ polymerization , 2001 .
[20] T. Kurauchi,et al. Polymer—Clay Hybrids , 1995 .
[21] J. Schoonman,et al. Formation and characterization of metal-polymer nanostructured composites , 2002 .
[22] R. Mülhaupt,et al. Poly(Methyl methacrylate)/Palladium Nanocomposites: Synthesis and Characterization of the Morphological, Thermomechanical, and Thermal Properties , 2003 .
[23] C. Mijangos,et al. Preparation and characterization of poly(vinyl alcohol)‐based magnetic nanocomposites. 1. Thermal and mechanical properties , 2001 .
[24] Klaus Friedrich,et al. Tensile performance improvement of low nanoparticles filled-polypropylene composites , 2002 .
[25] Ivan Javni,et al. Structure and properties of polyurethane–silica nanocomposites , 2000 .
[26] Jin-Hae Chang,et al. Nanocomposites of polyurethane with various organoclays: Thermomechanical properties, morphology, and gas permeability* , 2002 .
[27] S. Kim,et al. Mechanical and Rheological Properties of the Maleated Polypropylene-Layered Silicate Nanocomposites with Different Morphology , 2003 .
[28] G. Vigier,et al. Mechanical properties of clay‐reinforced polyamide , 2002 .
[29] G. Vigier,et al. Nanofillers in polymeric matrix : a study on silica reinforced PA6 , 2001 .
[30] S. Jana,et al. Mechanism of Exfoliation of Nanoclay Particles in Epoxy−Clay Nanocomposites , 2003 .
[31] Isaac M. Daniel,et al. Characterization and modeling of mechanical behavior of polymer/clay nanocomposites , 2003 .
[32] R. Tannenbaum,et al. Adsorption and Polymer Film Formation on Metal Nanoclusters , 2003 .
[33] H. Akita,et al. Studies on molecular composite. III. Nano composites consisting of poly(p-phenylene benzobisthiazole) and thermoplastic polyamide , 1999 .
[34] E. Gdoutos,et al. Processing and characterization of epoxy/clay nanocomposites , 2003 .
[35] Z. Yu,et al. Polyamide 6/silica nanocomposites prepared by in situ polymerization , 1998 .
[36] K. Friedrich,et al. Structure–property relationships of irradiation grafted nano-inorganic particle filled polypropylene composites , 2001 .
[37] Z. Yu,et al. A new conception on the toughness of nylon 6/silica nanocomposite prepared via in situ polymerization , 1998 .
[38] T. D. Fornes,et al. Polymer matrix degradation and color formation in melt processed nylon 6/clay nanocomposites , 2003 .
[39] J. E. Mark,et al. Clay nanolayer reinforcement of cis‐1,4‐polyisoprene and epoxidized natural rubber , 2001 .
[40] H. Akita,et al. Studies on molecular composite. I. Processing of molecular composites using a precursor polymer for poly(p‐phenylene benzobisthiazole) , 1999 .
[41] B. Gnade,et al. Exfoliated and intercalated polyamide-imide nanocomposites with montmorillonite , 2002 .
[42] Pht Peter Vollenberg,et al. Particle size dependence of the Young's modulus of filled polymers: 1. Preliminary experiments , 1989 .