A planar triangular monopole antenna with modified ground for UWB application

A new design about planar triangular monopole antenna using a modified ground plane for bandwidth enhancement is proposed. By symmetrically etching a pair of modified L-shaped slots in the ground plane, the impendence bandwidth is increased to 2.5–10.8 GHz under the condition of VSWR<2. Comparing with the original antenna (not slotted), the operating band of the proposed antenna is largely expended, whereas good radiation characteristics hold. The measured and simulated results show that the operating band of the proposed antenna completely covers the frequency range of ultra-wide band (UWB). © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26100

[1]  Kin-Lu Wong,et al.  Stripline-fed printed triangular monopole , 1997 .

[2]  Qi Wu,et al.  Printed Omni-Directional UWB Monopole Antenna With Very Compact Size , 2008, IEEE Transactions on Antennas and Propagation.

[3]  J. Nourinia,et al.  Bandwidth Enhancement of Novel Compact Single and Dual Band-Notched Printed Monopole Antenna With a Pair of L-Shaped Slots , 2009, IEEE Transactions on Antennas and Propagation.

[4]  Abdolali Abdipour,et al.  A Very Compact Ultrawideband Printed Omnidirectional Monopole Antenna , 2010, IEEE Antennas and Wireless Propagation Letters.

[5]  Chien-Jen Wang,et al.  Novel Broadband Monopole Antennas With Dual-Band Circular Polarization , 2009, IEEE Transactions on Antennas and Propagation.

[6]  Z. Qian,et al.  Design of a compact ultra-wideband printed antenna , 2010, 2010 International Conference on Microwave and Millimeter Wave Technology.

[8]  Girish Kumar,et al.  Wide band planar modified triangular monopole antennas , 2007 .