Fault detection of a 6-DOF hydraulic platform based on equivalent-input-disturbance approach

This paper presents a method of fault detection for a 6-degree-of-freedom hydraulic platform based on the equivalent-input-disturbance (EID) approach. First, a model of the platform is derived based on the Lagrange equation. Then, the types of actuator faults are analyzed. Finally, an optimal feedback controller is designed and the EID approach is incorporated to detect and suppress actuator faults. Simulation results demonstrate the effectiveness of the method.

[1]  Alain Codourey,et al.  Dynamic Modeling of Parallel Robots for Computed-Torque Control Implementation , 1998, Int. J. Robotics Res..

[2]  Sung Jin Yoo.  Actuator fault detection and adaptive accommodation control of flexible-joint robots , 2012 .

[3]  Kok Kiong Tan,et al.  Fault Detection and Diagnosis Based on Modeling and Estimation Methods , 2009, IEEE Transactions on Neural Networks.

[4]  H. Kobayashi,et al.  Disturbance estimation and rejection - an equivalent input disturbance estimator approach , 2004, 2004 43rd IEEE Conference on Decision and Control (CDC) (IEEE Cat. No.04CH37601).

[5]  Mehrdad Saif,et al.  Actuator fault diagnosis for uncertain linear systems using a high‐order sliding‐mode robust differentiator (HOSMRD) , 2008 .

[6]  Minqiang Xu,et al.  A Combined Model-Based and Intelligent Method for Small Fault Detection and Isolation of Actuators , 2016, IEEE Transactions on Industrial Electronics.

[7]  Youmin Zhang,et al.  Experimental Test of a Two-Stage Kalman Filter for Actuator Fault Detection and Diagnosis of an Unmanned Quadrotor Helicopter , 2013, J. Intell. Robotic Syst..

[8]  D. Ho,et al.  Robust stabilization for a class of discrete-time non-linear systems via output feedback: The unified LMI approach , 2003 .

[9]  Yan Zhao,et al.  Optimal Actuator Fault Detection for a TGSCM System Based on Disturbance Compensation , 2016, IEEE Transactions on Industrial Electronics.

[10]  Mingxing Fang,et al.  Improving Disturbance-Rejection Performance Based on an Equivalent-Input-Disturbance Approach , 2008, IEEE Transactions on Industrial Electronics.

[11]  Yaodong Pan,et al.  Equivalent-Input-Disturbance Approach—Analysis and Application to Disturbance Rejection in Dual-Stage Feed Drive Control System , 2011, IEEE/ASME Transactions on Mechatronics.