Potential and limitations of CsBi3I10 as a photovoltaic material

Herein we demonstrate the dry synthesis of CsBi3I10 both as a free-standing material and in the form of homogeneous thin films, deposited by thermal vacuum deposition. Chemical and optical characterization shows high thermal stability, phase purity, and photoluminescence centered at 700 nm, corresponding to a bandgap of 1.77 eV. These characteristics make CsBi3I10 a promising low-toxicity material for wide bandgap photovoltaics. Nevertheless, the performance of this material as a semiconductor in solar cells remains rather limited, which can be at least partially ascribed to a low charge carrier mobility, as determined from pulsed-radiolysis time-resolved microwave conductivity. Further developments should focus on understanding and overcoming the current limitations in charge mobility, possibly by compositional tuning through doping and/or alloying, as well as optimizing the thin film morphology which may be another limiting factor.

[1]  D. Mitzi,et al.  Is Cs2TiBr6 a promising Pb-free perovskite for solar energy applications? , 2020, Journal of Materials Chemistry A.

[2]  F. Palazón,et al.  Solvent-Free Synthesis and Thin-Film Deposition of Cesium Copper Halides with Bright Blue Photoluminescence , 2019 .

[3]  M. Grätzel,et al.  Mechanoperovskites for Photovoltaic Applications: Preparation, Characterization, and Device Fabrication. , 2019, Accounts of chemical research.

[4]  P. Fan,et al.  Inorganic and Pb-Free CsBi3I10 Thin Film for Photovoltaic Applications , 2019, The Journal of Physical Chemistry C.

[5]  Yan Wang,et al.  Photoresponsive Transistors Based on Lead‐Free Perovskite and Carbon Nanotubes , 2019, Advanced Functional Materials.

[6]  Oleksandr Voznyy,et al.  Solution-processed Perovskite-colloidal Quantum Dot Tandem Solar Cells for Photon Collection Beyond 1000 nm , 2019, Proceedings of the Asia-Pacific International Conference on Perovskite, Organic Photovoltaics and Optoelectronics.

[7]  M. Yanagida,et al.  Tailoring the film morphology and interface band offset of caesium bismuth iodide-based Pb-free perovskite solar cells , 2019, Journal of Materials Chemistry C.

[8]  M. Bawendi,et al.  The Effect of Structural Dimensionality on Carrier Mobility in Lead-Halide Perovskites , 2019, Journal of Materials Chemistry A.

[9]  Rohit Abraham John,et al.  Completely Solvent-free Protocols to Access Phase-Pure, Metastable Metal Halide Perovskites and Functional Photodetectors from the Precursor Salts , 2019, iScience.

[10]  F. Palazón,et al.  Low-dimensional non-toxic A3Bi2X9 compounds synthesized by a dry mechanochemical route with tunable visible photoluminescence at room temperature , 2019, Journal of Materials Chemistry C.

[11]  D. Gamelin,et al.  Single-Source Vapor Deposition of Quantum-Cutting Yb3+:CsPb(Cl1–xBrx)3 and Other Complex Metal-Halide Perovskites , 2019, ACS Applied Energy Materials.

[12]  J. Vela,et al.  Synthesis and mixing of complex halide perovskites by solvent-free solid-state methods , 2019, Journal of Solid State Chemistry.

[13]  L. Luo,et al.  Inorganic CsBi3I10 perovskite/silicon heterojunctions for sensitive, self-driven and air-stable NIR photodetectors , 2019, Journal of Materials Chemistry C.

[14]  Abdullah Al Mamun,et al.  A Review: Thermal Stability of Methylammonium Lead Halide Based Perovskite Solar Cells , 2019, Applied Sciences.

[15]  F. Palazón,et al.  Single-Source Vacuum Deposition of Mechanosynthesized Inorganic Halide Perovskites , 2018, Chemistry of Materials.

[16]  Chang Su Kim,et al.  Enhanced efficiency in lead-free bismuth iodide with post treatment based on a hole-conductor-free perovskite solar cell , 2018, Nano Research.

[17]  Tomas Leijtens,et al.  Opportunities and challenges for tandem solar cells using metal halide perovskite semiconductors , 2018, Nature Energy.

[18]  E. Johansson,et al.  The Effect of Dopant-Free Hole-Transport Polymers on Charge Generation and Recombination in Cesium-Bismuth-Iodide Solar Cells. , 2018, ChemSusChem.

[19]  A. Uddin,et al.  Tandem perovskite solar cells , 2018 .

[20]  Y. Tsang,et al.  Nanophotonic design of perovskite/silicon tandem solar cells , 2018 .

[21]  Henk J. Bolink,et al.  Vapor-Deposited Perovskites: The Route to High-Performance Solar Cell Production? , 2017 .

[22]  M. Kanatzidis,et al.  Interconversion between Free Charges and Bound Excitons in 2D Hybrid Lead Halide Perovskites , 2017, The journal of physical chemistry. C, Nanomaterials and interfaces.

[23]  L. Herz Charge-Carrier Mobilities in Metal Halide Perovskites: Fundamental Mechanisms and Limits , 2017 .

[24]  L. Luo,et al.  High-Performance Red-Light Photodetector Based on Lead-Free Bismuth Halide Perovskite Film. , 2017, ACS applied materials & interfaces.

[25]  Guangda Niu,et al.  Enhancement of thermal stability for perovskite solar cells through cesium doping , 2017 .

[26]  E. Johansson,et al.  Extended Photo-Conversion Spectrum in Low-Toxic Bismuth Halide Perovskite Solar Cells. , 2016, The journal of physical chemistry letters.

[27]  M. Kanatzidis,et al.  Effect of Cation Rotation on Charge Dynamics in Hybrid Lead Halide Perovskites , 2016 .

[28]  M. Grätzel,et al.  Mechanosynthesis of the hybrid perovskite CH3NH3PbI3: characterization and the corresponding solar cell efficiency , 2015 .

[29]  M. B. Rabeh,et al.  The Effect of Thickness on Optical Band Gap and N-type Conductivity of CuInS2 Thin Films Annealed in Air Atmosphere☆ , 2014 .