A new structure-related model to predict the permeability of non-crimp fabric preform

The permeability of the fabric preform is a critical input parameter for analyzing the liquid composite molding impregnation process. However, the permeability prediction is challenging due to its complex dependence on the fabric structure. In this paper, a novel analytical model is developed to predict the permeability of non-crimp fabric preform based on the relation between the pressure drop and geometric parameters of the microchannel cross section. The model takes into account four structural parameters including the width, the height, the semi-major axis length of the ellipse section of fiber bundle and the distance between fiber bundles. The permeability of the unit cell is calculated by the presented analytical model and the finite element simulation, respectively. The results show that the channels between fiber bundles play an important role in determining the fabric permeability. The structural parameters of the unit cell have important effects on the permeability. The new structure-related permeability model can accurately predict the permeability of the non-crimp fabric preform in a certain range.

[1]  R. Umer,et al.  The effect of yarn length and diameter on permeability and compaction response of flax fibre mats , 2011 .

[2]  M. Yovanovich,et al.  Pressure Drop of Fully-Developed, Laminar Flow in Microchannels of Arbitrary Cross-Section , 2006 .

[3]  Hua Tan,et al.  Multiscale modeling of unsaturated flow in dual-scale fiber preforms of liquid composite molding I: Isothermal flows , 2012 .

[4]  A. Jakovics,et al.  Permeability of Clustered Fiber Networks: Modeling of the Unit Cell , 2003 .

[5]  Majid Bahrami,et al.  A novel solution for pressure drop in singly connected microchannels of arbitrary cross-section , 2007 .

[6]  Huiying Wu,et al.  Friction factors in smooth trapezoidal silicon microchannels with different aspect ratios , 2003 .

[7]  C. Lekakou,et al.  Computer modelling for the prediction of the in-plane permeability of non-crimp stitch bonded fabrics , 2006 .

[8]  Markus Nordlund,et al.  Numerical Study of the Local Permeability of Noncrimp Fabrics , 2005 .

[9]  Majid Bahrami,et al.  SINGLE PHASE THROUGH-PLANE PERMEABILITY OF CARBON PAPER GAS DIFFUSION LAYERS , 2012 .

[10]  Jiang Liu,et al.  Numerical study of fluid flow and heat transfer in microchannel cooling passages , 2007 .

[11]  D. F. James,et al.  The permeability of fibrous porous media , 1986 .

[12]  L. J. Lee,et al.  A simplified in‐plane permeability model for textile fabrics , 2000 .

[13]  Jian Li,et al.  Numerical simulation of fluid flow and heat transfer in a microchannel heat sink with offset fan-shaped reentrant cavities in sidewall ☆ , 2011 .

[14]  Kumar K. Tamma,et al.  Microscale Permeability Predictions of Porous Fibrous Media , 1999, Application of Porous Media Methods for Engineered Materials.

[15]  Aydin Nabovati,et al.  A general model for the permeability of fibrous porous media based on fluid flow simulations using the lattice Boltzmann method , 2009 .

[16]  Majid Bahrami,et al.  Laminar Flow in Microchannels With Noncircular Cross Section , 2010 .

[17]  M. M. Tomadakis,et al.  Viscous Permeability of Random Fiber Structures: Comparison of Electrical and Diffusional Estimates with Experimental and Analytical Results , 2005 .

[18]  C. Binetruy,et al.  Unified microporomechanical approach for mechanical behavior and permeability of misaligned unidirectional fiber reinforcement , 2010 .

[19]  H. Tan,et al.  Numerical simulation of reactive flow in liquid composite molding using flux-corrected transport (FCT) based finite element/control volume (FE/CV) method , 2010 .

[20]  A. Hoekstra,et al.  Permeability of Three-Dimensional Random Fiber Webs , 1998 .

[21]  T. Lundström.  The permeability of non-crimp stitched fabrics , 2000 .

[22]  W. Lee,et al.  Modeling and simulation of voids and saturation in liquid composite molding processes , 2011 .

[23]  Majid Bahrami,et al.  Analytical determination of viscous permeability of fibrous porous media , 2009 .

[24]  Simon L. Goren,et al.  Model for predicting pressure drop and filtration efficiency in fibrous media , 1968 .

[25]  L. Lessard,et al.  An Experimental Study of Saturated and Unsaturated Permeabilities in Resin Transfer Molding Based on Unidirectional Flow Measurements , 2004 .

[26]  Jae Ryoun Youn,et al.  Prediction of permeability tensor for three dimensional circular braided preform by applying a finite volume method to a unit cell , 2004 .

[27]  A. Vázquez,et al.  Study of saturated and unsaturated permeability in natural fiber fabrics , 2010 .

[28]  M. Nordlund,et al.  Effect of Multi-Scale Porosity in Local Permeability Modelling of Non-Crimp Fabrics , 2008 .

[29]  A. Tamayol,et al.  Thermal Analysis of Flow in a Porous Medium Over a Permeable Stretching Wall , 2010 .

[30]  B. R. Gebart,et al.  Permeability of Unidirectional Reinforcements for RTM , 1992 .

[31]  Sven Bossuyt,et al.  2D permeability tensor identification of fibrous reinforcements for RTM using an inverse method , 2008 .

[32]  Andrew C. Long,et al.  A model for the in-plane permeability of triaxially braided reinforcements , 2011 .

[33]  A. Tamayol,et al.  Transverse permeability of fibrous porous media. , 2011, Physical review. E, Statistical, nonlinear, and soft matter physics.

[34]  H. Brinkman.  A calculation of the viscous force exerted by a flowing fluid on a dense swarm of particles , 1949 .

[35]  L. An,et al.  Mesoscopic simulation of the impregnating process of unidirectional fibrous preform in resin transfer molding , 2006 .

[36]  Han Zhao.  The numerical solution of gaseous slip flows in microtubes , 2001 .

[37]  Zuorong Chen,et al.  Permeability Predictions for Woven Fabric Preforms , 2010 .