Chip Flow and Scaling Laws in High Speed Metal Cutting

[1]  J. H. Dautzenberg,et al.  Material behaviour in metal cutting: strains, strain rates and temperatures in chip formation , 2002 .

[2]  Sung-Lim Ko,et al.  Prediction of tool-chip contact length using a new slip-line solution for orthogonal cutting , 2003 .

[3]  Sylvain Philippon,et al.  Temperature Measurement by Visible Pyrometry: Orthogonal Cutting Application , 2004 .

[5]  Erhan Budak,et al.  Analytical and experimental investigation of rake contact and friction behavior in metal cutting , 2009 .

[6]  W. F. Hastings,et al.  A machining theory for predicting chip geometry, cutting forces etc. from work material properties and cutting conditions , 1980, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[7]  Alain Molinari,et al.  Numerical and analytical modeling of orthogonal cutting: The link between local variables and global contact characteristics , 2011 .

[8]  R. Komanduri,et al.  A review of the experimental techniques for the measurement of heat and temperatures generated in some manufacturing processes and tribology , 2001 .

[9]  Gustavo Sutter,et al.  Analysis of the Cutting Force Components and Friction in High Speed Machining , 2005 .

[10]  P. Wright,et al.  Stress analysis in machining with the use of sapphire tools , 1987, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[11]  A. A. Radwan.  Investigation of secondary deformation zone and mean coefficient of friction during the machining of 5083-H34 aluminum alloy , 1985 .

[12]  Paul K. Wright,et al.  Boundary conditions at the chip-tool interface in machining: Comparisons between seizure and sliding friction , 1979 .

[13]  M. C. Shaw,et al.  Mechanics of Saw-Tooth Chip Formation in Metal Cutting , 1999 .

[14]  K. Nakayama.  A Study on Chip-breaker , 1961 .

[15]  M. Y. Friedman,et al.  Investigation of the tool-chip contact length in metal cutting , 1970 .

[16]  R. Komanduri,et al.  On the Mechanics of Chip Segmentation In Machining , 1981 .

[17]  Alain Molinari,et al.  An experimental technique for the measurement of temperature fields for the orthogonal cutting in high speed machining , 2003 .

[18]  D. Lee.  The Effect of Cutting Speed on Chip Formation Under Orthogonal Machining , 1985 .

[19]  Gustavo Sutter,et al.  An Experimental Study of High Speed Orthogonal Cutting , 1998 .

[20]  Guy Sutter,et al.  Chip geometries during high-speed machining for orthogonal cutting conditions , 2005 .