A Ka-Band Receiver Front-End With Noise Injection Calibration Circuit for CubeSats Inter-Satellite Links

This paper proposes a Ka-band receiver front-end for future CubeSats Low-Earth Orbit (LEO) to Geostationary (GEO) inter-satellite links. The receiver is able to support very high data rates (up to 100 Mbit/s) in Quadrature Phase-Shift Keying (QPSK) when in the line of sight of a GEO satellite that is equipped with a steerable 70-cm antenna and transmitting a 25-W signal. The originality of the proposed approach is twofold. First we will demonstrate the receiver feasibility based on a class of miniaturized and low-cost microwave integrated circuits, currently available on the market. In particular, our receiver is based on a novel combination of integrated Low-Noise Amplifiers (LNA) with an image rejection filter, the latter exploiting the Substrate Integrated Waveguide (SIW) technology. An optimization of the via placement proved to be able to reduce the need for shielding apparatuses, thus simplifying the mechanics and reducing mass, volume and hardware costs. Secondly, we will propose a noise injection circuit capable of measuring and calibrating the receiver gain, also during in-orbit operation. Self testing capabilities are particularly relevant for CubeSats because the usage of commercial components poses serious reliability issues.

[1]  V. Greco,et al.  The ADAHELI solar mission: Investigating the structure of Sun's lower atmosphere , 2010 .

[2]  Mina Mitry,et al.  Routers in space: Kepler communications' CubeSats will create an Internet for other satellites , 2020, IEEE Spectrum.

[3]  L. Roselli,et al.  Rigorous modeling of packaged Schottky diodes by the nonlinear lumped network (NL/sup 2/N)-FDTD approach , 2000 .

[4]  Luca ALUIGI,et al.  MIDAS : Automated Approach to Design Microwave Integrated Inductors and Transformers on Silicon , 2013 .

[5]  Roberto Sorrentino,et al.  Efficient analysis of waveguide components by FDTD combined with time domain modal expansion , 1995 .

[6]  M. Feudale,et al.  Fully Integrated Ka/K Band Hermetic Receiver Module , 2000, 2000 30th European Microwave Conference.

[7]  Ian D. Robertson,et al.  Design and performance of a 60-GHz multi-chip module receiver employing substrate integrated waveguides , 2007 .

[8]  Ke Wu,et al.  Broadband coplanar-waveguide and microstrip low-noise amplifier hybrid integrations for k-band substrate integrated waveguide applications on low-permittivity substrate , 2014 .

[9]  Vignesh Manohar,et al.  For Satellites, Think Small, Dream Big: A review of recent antenna developments for CubeSats. , 2017, IEEE Antennas and Propagation Magazine.

[10]  Xiupu Zhang,et al.  Substrate integrated waveguide six-port broadband front-end circuit for millimeter-wave radio and radar systems , 2009, 2009 European Microwave Conference (EuMC).

[11]  Ian D. Robertson,et al.  60 GHz multi-chip-module receiver with substrate integrated waveguide antenna and filter , 2006 .

[12]  Joseph A. Downey,et al.  Pre-Flight Testing and Performance of a Ka-Band Software Defined Radio , 2012 .

[13]  Kimberley W. Eccleston.  Effect of microstrip feeds on half-mode SIW distributed amplifier performance , 2015, 2015 Asia-Pacific Microwave Conference (APMC).

[14]  Chan-Wang Park,et al.  Full mode substrate integrated waveguide type high power amplifier with second harmonic suppression , 2017, 2017 IEEE Asia Pacific Microwave Conference (APMC).

[15]  Nacer E. Chahat.  A mighty antenna from a tiny CubeSat grows , 2018, IEEE Spectrum.

[16]  Wei Hong,et al.  Study of dual-balanced mixer with half mode substrate integrated waveguide , 2008, 2008 International Conference on Microwave and Millimeter Wave Technology.

[17]  Chan-Wang Park,et al.  Novel substrate integrated waveguide (SIW)-based power amplifier using SIW-based filter to suppress up to the fourth harmonic , 2012, 2012 Asia Pacific Microwave Conference Proceedings.

[18]  Guo-Ping Hu,et al.  Microwave Brightness Temperature of the Moon: The Possibility of Setting a Calibration Source of the Lunar Surface , 2016, IEEE Geoscience and Remote Sensing Letters.

[19]  A. Georgiadis,et al.  X-band substrate integrated waveguide (SIW) active antenna self-oscillating mixer (SOM) , 2012, Proceedings of the 2012 IEEE International Symposium on Antennas and Propagation.

[20]  Lluís Pradell i Cara,et al.  Extraction of an avalanche diode noise model for its application as on-wafer noise source , 2003 .

[21]  Maurizio Bozzi,et al.  Advanced modeling and design of substrate integrated waveguide components , 2014, 2014 IEEE International Wireless Symposium (IWS 2014).

[22]  Wenquan Che,et al.  A Bandpass Push–Pull High Power Amplifier Based on SIW Filtering Balun Power Divider , 2019, IEEE Transactions on Plasma Science.

[23]  M. Shahabadi,et al.  X-Band Substrate Integrated Waveguide Amplifier , 2008, IEEE Microwave and Wireless Components Letters.

[24]  Maurizio Bozzi,et al.  Radiation losses in Substrate Integrated Waveguides: A semi-analytical approach for a quantitative determination , 2013, 2013 IEEE MTT-S International Microwave Symposium Digest (MTT).

[25]  Thomas H. Zurbuchen,et al.  Achieving Science with CubeSats: Thinking Inside the Box , 2016 .

[26]  Ke Wu,et al.  180-degree substrate integrated waveguide hybrid and its application to broadband millimeter-wave single balanced mixer design , 2010, 2010 Asia-Pacific Microwave Conference.

[27]  Apostolos Georgiadis,et al.  22.8 GHz Substrate Integrated Waveguide Analog Frequency Divide-by-3 Circuit , 2015, IEEE Microwave and Wireless Components Letters.

[28]  Ke Wu,et al.  High Isolation Substrate Integrated Waveguide Passive Front-End for Millimeter-Wave Systems , 2006, 2006 IEEE MTT-S International Microwave Symposium Digest.

[29]  Cyril Botteron,et al.  Avalanche Microwave Noise Sources in Commercial 90-nm CMOS Technology , 2016, IEEE Transactions on Microwave Theory and Techniques.

[30]  Kimberley W. Eccleston.  SIW distributed amplifier: Analysis, prospects and challenges , 2016, 2016 IEEE MTT-S International Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization (NEMO).

[31]  Cyril Botteron,et al.  Avalanche noise diodes: A compact circuit model compatible with advanced CAD tools , 2015, 2015 International Conference on Noise and Fluctuations (ICNF).

[32]  Chan-Wang Park,et al.  Substrate integrated waveguide (SIW) power amplifier using CBCPW-to-SIW transition for matching network , 2012, 2012 IEEE/MTT-S International Microwave Symposium Digest.

[33]  Luca Roselli,et al.  K/Ka-Band Very High Data-Rate Receivers: A Viable Solution for Future Moon Exploration Missions , 2019 .

[34]  Anna Gregorio,et al.  CubeSats for Future Science and Internet of Space: Challenges and Opportunities , 2018, 2018 25th IEEE International Conference on Electronics, Circuits and Systems (ICECS).

[35]  Chan-Wang Park,et al.  Novel substrate integrated waveguide (SIW) type high power amplifier using microstrip-to-SIW transition , 2013, 2013 Asia-Pacific Microwave Conference Proceedings (APMC).

[36]  J. S. Knogl,et al.  Geostationary Data Relays for Low Earth Orbit Satellites , 2015 .

[37]  Wei Hong,et al.  Realization of a sub-harmonic mixer with a substrate integrated waveguide filter , 2005, IEEE/ACES International Conference on Wireless Communications and Applied Computational Electromagnetics, 2005..

[38]  Kamal K. Samanta,et al.  Advanced multilayer photoimaged substrate integrated waveguides and RF front-end for emerging mm-wave wireless applications , 2014, 2014 IEEE Topical Conference on Wireless Sensors and Sensor Networks (WiSNet).

[39]  L. Roselli,et al.  A Ka-Band Transceiver for CubeSat Satellites: Feasibility Study and Prototype Development , 2018, 2018 48th European Microwave Conference (EuMC).

[40]  Ke Wu,et al.  Substrate Integrated Waveguide Cross-Coupled Filter With Negative Coupling Structure , 2008, IEEE Transactions on Microwave Theory and Techniques.