Tailoring Properties of Biocompatible PEG-DMA Hydrogels with UV Light

Hydrogels are highly water-absorbent hydrophilic polymer networks, which show potential in many biocompatible applications. In previous work, we demonstrated the feasibility of using poly(ethylene glycol) dimethacrylate (PEG-DMA) gels polymerized with a photoinitiator for encapsulation and stabilization of painted biomimetic membrane arrays for novel separation technologies or biosensor applications. These gels were formed from PEG-DMA monomers suspended in phosphate buffered saline (PBS) solution and gelated by radical polymerization in the presence of the photoinitiator Darocur 1173. In this work, we show that the properties of a PEG-DMA hydrogel formed by photoinitiated polymerizetion can be tailored by varying the photocrosslinking time. Fourier Transform Infrared Spectroscopy (FTIR) and Raman Spectroscopy (RS) showed that the optimal crosslinking time for the gel was 6 - 10 minutes and that the water content of the gels could be tuned in the range of 50 - 90 wt%. The resistivity was between 0.8 - 3.5 Ωm, which is comparable to that of PBS. The low resistivity of the gel makes it compatible for encapsulating membranes for (ion channel based) biosensor applications. With FTIR and RS we identified spectral features of the hydrogel, which may serve as a diagnostic tool to monitor changes in the gels due to variation in parameters such as time, pH, temperature, aging or exposure to chemicals or biological material.

[1]  O. Geschke,et al.  Development of an automation technique for the establishment of functional lipid bilayer arrays , 2009 .

[2]  D. Mooney,et al.  Hydrogels for tissue engineering. , 2001, Chemical Reviews.

[3]  R. Pashley,et al.  De-gassed water is a better cleaning agent. , 2005, The journal of physical chemistry. B.

[4]  L Jensen,et al.  Reaction Kinetics of Acetone Peroxide Formation and Structure Investigations Using Raman Spectroscopy and X-Ray Diffraction , 2009, Applied spectroscopy.

[5]  Mark Ladd,et al.  Introduction to physical chemistry: Index , 1986 .

[6]  Kinzi Asaka.  Dielectric properties of cellulose acetate reverse osmosis membranes in aqueous salt solutions , 1990 .

[7]  H. Bohr,et al.  Large scale biomimetic membrane arrays , 2009, Analytical and bioanalytical chemistry.

[8]  Ali Khademhosseini,et al.  A simple soft lithographic route to fabrication of poly(ethylene glycol) microstructures for protein and cell patterning. , 2004, Biomaterials.

[9]  J. Hubbell,et al.  In Vitro and in Vivo Performance of Porcine Islets Encapsulated in Interfacially Photopolymerized Poly(Ethylene Glycol) Diacrylate Membranes , 1999, Cell transplantation.

[10]  A. Hoffman.  Hydrogels for Biomedical Applications , 2001, Advanced drug delivery reviews.

[11]  Fernanda F. Rossetti,et al.  Native supported membranes on planar polymer supports and micro-particle supports. , 2009, Journal of structural biology.

[12]  F M Andreopoulos,et al.  Light-induced tailoring of PEG-hydrogel properties. , 1998, Biomaterials.

[13]  Claus Hélix-Nielsen.  Biomimetic membranes for sensor and separation applications , 2012 .

[14]  D. Mooney,et al.  Hydrogels for tissue engineering: scaffold design variables and applications. , 2003, Biomaterials.

[15]  E. Sackmann,et al.  Supported membranes as biofunctional interfaces and smart biosensor platforms , 2006 .

[16]  Douglass S. Kalika,et al.  Water uptake, transport and structure characterization in poly(ethylene glycol) diacrylate hydrogels , 2010 .

[17]  Bernard A. Boukamp,et al.  A package for impedance/admittance data analysis , 1986 .

[18]  N. Peppas,et al.  Hydrogels in Pharmaceutical Formulations , 1999 .

[19]  J. Elisseeff,et al.  Photoencapsulation of chondrocytes in poly(ethylene oxide)-based semi-interpenetrating networks. , 2000, Journal of biomedical materials research.

[20]  N. Peppas,et al.  Physicochemical foundations and structural design of hydrogels in medicine and biology. , 2000, Annual review of biomedical engineering.

[21]  O. Geschke,et al.  A support structure for biomimetic applications , 2009 .

[22]  C. Hélix-Nielsen,et al.  Electrochemical characterization of hydrogels for biomimetic applications , 2011 .

[23]  H. Bohr,et al.  Hydrogels for in situ encapsulation of biomimetic membrane arrays , 2012 .

[24]  Tae-Joon Jeon,et al.  Hydrogel-encapsulated lipid membranes. , 2006, Journal of the American Chemical Society.

[25]  Pierre-Emile Duhamel,et al.  Progress in the development of interpenetrating polymer network hydrogels. , 2008, Polymers for advanced technologies.

[26]  J. Benavente,et al.  Modification of a regenerated cellulose membrane with lipid nanoparticles and layers. Nanoparticle preparation, morphological and physicochemical characterization of nanoparticles and modified membranes , 2010 .