Microstructure evolution and acicular ferrite nucleation in inclusion-engineered steel with modified MgO@C nanoparticle addition

[1]  X. Sun,et al.  Effect of post-bond heat treatment on the microstructure and high temperature mechanical property of a TLP bonded γ′-strengthened co-based single crystal superalloy , 2021, Journal of Materials Science & Technology.

[2]  H. Fu,et al.  Distribution control and formation mechanism of gas inclusions in directionally solidified Al2O3-Er3Al5O12-ZrO2 ternary eutectic ceramic by laser floating zone melting , 2021 .

[3]  Zongqing Ma,et al.  Microstructure refinement and mechanical properties improvement in the W-Y2O3 alloys via optimized freeze-drying , 2021, International Journal of Refractory Metals and Hard Materials.

[4]  P. Peng,et al.  In-situ analysis on formation of micropores by Rayleigh instability in solidification of Sn-Ni alloy , 2020 .

[5]  Kong Xiangwei,et al.  Synthesis and characterization of nano TiC dispersed strengthening W alloys via freeze-drying , 2020 .

[6]  Wanlin Wang,et al.  In Situ Observation of the MnS Precipitation Behavior in High-Sulfur Microalloyed Steel Under Different Cooling Rates , 2020, Metallurgical and Materials Transactions B.

[7]  Zhang Qingjun,et al.  In-depth analysis of intragranular acicular ferrite three-dimensional morphology , 2020 .

[8]  Sunghak Lee,et al.  Effects of Cu addition on formability and surface delamination phenomenon in high-strength high-Mn steels , 2020 .

[9]  G. Miyamoto,et al.  Weak influence of ferrite growth rate and strong influence of driving force on dispersion of VC interphase precipitation in low carbon steels , 2020, Acta Materialia.

[10]  E. Palmiere,et al.  Influence of cooling rate on the grain-refining effect of austenite deformation in a HSLA steel , 2019, Materials Characterization.

[11]  S. Münstermann,et al.  Microstructure-based fatigue modelling with residual stresses: Prediction of the microcrack initiation around inclusions , 2019, Materials Science and Engineering: A.

[12]  Wei Liu,et al.  Control of MnS Inclusions in High- and Low-Sulfur Steel by Tellurium Treatment , 2019, Materials.

[13]  R. Misra,et al.  Evolution of Inclusions and Associated Microstructure in Ti–Mg Oxide Metallurgy Steel , 2019, ISIJ International.

[14]  Zhiliang Zhang,et al.  Effects of local grain size and inclusions on the low-temperature toughness of low-carbon as-quenched martensite , 2019, Materials Science and Engineering: A.

[15]  Hao Guo,et al.  Effects of Surface-Modified MgO Nanoparticles on Inclusion Characteristics and Microstructure in Carbon Structural Steel , 2018 .

[16]  Tiantian Wang,et al.  Synthesis of Core-Shell MgO Alloy Nanoparticles for Steelmaking , 2018 .

[17]  Y. H. Oh,et al.  Hetero-epitaxial nucleation of ferrite at a TiN encapsulating MgAl2O4 during rapid solidification in a newly developed ferritic stainless steel , 2017 .

[18]  Shenghua Zhang,et al.  Role of Lanthanum Addition on Acicular Ferrite Transformation in C–Mn Steel , 2017 .

[19]  Shuo Zhang,et al.  Effect of Mg Addition on the Refinement and Homogenized Distribution of Inclusions in Steel with Different Al Contents , 2017, Metallurgical and Materials Transactions B.

[20]  Changhee Lee,et al.  Correlation Between Microstructure and Low-Temperature Impact Toughness of Simulated Reheated Zones in the Multi-pass Weld Metal of High-Strength Steel , 2017, Metallurgical and Materials Transactions A.

[21]  H. Shibata,et al.  Ferrite Formation Dynamics and Microstructure Due to Inclusion Engineering in Low-Alloy Steels by Ti2O3 and TiN Addition , 2016, Metallurgical and Materials Transactions B.

[22]  Yu Zhang,et al.  Enhancement of Heat-Affected Zone Toughness of a Low Carbon Steel by TiN Particle , 2016, Metallurgical and Materials Transactions B.

[23]  Wei Gao,et al.  Addition of MgO Nanoparticles to Carbon Structural Steel and the Effect on Inclusion Characteristics and Microstructure , 2016, Metallurgical and Materials Transactions B.

[24]  Jung G. Lee,et al.  Effect of nano-sized TiC particle addition on microstructure and mechanical properties of SA-106B carbon steel , 2015 .

[25]  G. Yuan,et al.  Mechanism of Microstructural Control and Mechanical Properties in Hot Rolled Plain C–Mn Steel during Controlled Cooling , 2015 .

[26]  R. Misra,et al.  Influence of cooling rate on the precipitation behavior in Ti–Nb–Mo microalloyed steels during continuous cooling and relationship to strength , 2015 .

[27]  H. Matsuura,et al.  Effect of Inclusions’ Behavior on the Microstructure in Al-Ti Deoxidized and Magnesium-Treated Steel with Different Aluminum Contents , 2015, Metallurgical and Materials Transactions B.

[28]  Sunghak Lee,et al.  Effects of Oxides on Tensile and Charpy Impact Properties and Fracture Toughness in Heat Affected Zones of Oxide-Containing API X80 Linepipe Steels , 2014, Metallurgical and Materials Transactions A.

[29]  Z. D. Wang,et al.  Transformation behavior of a Ti–Zr deoxidized steel: Microstructure and toughness of simulated coarse grain heat affected zone , 2014 .

[30]  S. Sankaran,et al.  Microstructural Characterization and Mechanical Properties of Powder Metallurgy Dual Phase Steel Preforms , 2012 .

[31]  Song Bo,et al.  In Situ Observation of the Evolution of Intragranular Acicular Ferrite at Ce‐Containing Inclusions in 16Mn Steel , 2012 .

[32]  B. Song,et al.  Effect of SiMg alloy on inclusions and microstructures of 16Mn steel , 2011 .

[33]  Zhenguo Yang,et al.  Effect of Magnesium on the Austenite Grain Growth of the Heat-Affected Zone in Low-Carbon High-Strength Steels , 2011 .

[34]  Kohichi Isobe,et al.  Effect of Mg Addition on Solidification Structure of Low Carbon Steel , 2010 .

[35]  Shu-feng Yang,et al.  Behavior of MgO • Al2O3 Based Inclusions in Alloy Steel During Refining Process , 2010 .

[36]  Y. Komizo,et al.  In situ observation of the formation of intragranular acicular ferrite at non-metallic inclusions in C–Mn steel , 2010 .

[37]  A. Karasev,et al.  On the Role of Non-metallic Inclusions in the Nucleation of Acicular Ferrite in Steels , 2009 .

[38]  Jian Yang,et al.  Characteristics of Inclusions Generated during Al–Mg Complex Deoxidation of Molten Steel , 2007 .

[39]  S. Shanmugam,et al.  Effect of cooling rate on the microstructure and mechanical properties of Nb-microalloyed steels , 2007 .

[40]  L. Kolbeinsen,et al.  Microstructure Control of Steels through Dispersoid Metallurgy Using Novel Grain Refining Alloys , 2006 .

[41]  L. H. Almeida,et al.  Yttrium addition to heat-resistant cast stainless steel , 2006 .

[42]  H. Ohta,et al.  Effects of Dissolved Oxygen and Size Distribution on Particle Coarsening of Deoxidation Product , 2006 .

[43]  Beom-Jun Kim,et al.  Effects of Inclusions and Microstructures on Impact Energy of High Heat-Input Submerged-Arc-Weld Metals , 2005 .

[44]  J. Ai,et al.  Effect of controlled rolling and cooling on the microstructure and mechanical properties of 60Si2MnA spring steel rod , 2005 .

[45]  Dong Nyung Lee,et al.  Non-metallic inclusion and intragranular nucleation of ferrite in Ti-killed C–Mn steel , 2003 .

[46]  M. Díaz-Fuentes,et al.  Analysis of different acicular ferrite microstructures in low-carbon steels by electron backscattered diffraction. Study of their toughness behavior , 2003 .

[47]  H. Fujimura,et al.  Effect of Oxide Composition on Solidification Structure of Ti Added Ferritic Stainless Steel , 2001 .

[48]  P. Manohar,et al.  Simulation of Hot-band Microstructure of C–Mn Steels during High Speed Cooling , 2001 .

[49]  Dong Nyung Lee,et al.  Ferrite nucleation potency of non-metallic inclusions in medium carbon steels , 2001 .

[50]  Tae-Kyu Lee,et al.  Effect of Inclusion Size on the Nucleation of Acicular Ferrite in Welds , 2000 .

[51]  Dong Nyung Lee,et al.  Nucleation of intragranular ferrite at Ti2O3 particle in low carbon steel , 1999 .

[52]  M. Hasegawa,et al.  Strengthening of steel by the method of spraying oxide particles into molten steel stream , 1978 .

[53]  A. V. Nozhkina,et al.  Wetting of diamond and graphite by liquid iron-titanium alloys , 1971 .

[54]  B. L. Bramfitt.  The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron , 1970 .

[55]  W. Kingery,et al.  Metal‐Ceramic Interactions: III, Surface Tension and Wettability of Metal‐Ceramic Systems , 1954 .