Improvement of the oxidation resistance of TiC-coated carbon black by high-temperature annealing in N2

The annealing of TiC-coated carbon black in N2 at 1000–1300 °C resulted in formation of a TiCxNy solid solution, grain growth and removal of nanocracks in coatings, which significantly increased the commencement and completion temperatures of carbon oxidation, effectively improving their oxidation resistance.

[1]  M. Mozafari,et al.  The effect of heat-treatment on the structural characteristics of nanocrystalline chlorapatite particles synthesized via an in situ wet-chemical route , 2015 .

[2]  R. Gupta,et al.  Improvement of oxidation resistance of TiCN films prepared by laser alloying , 2015 .

[3]  Jun Zhao,et al.  Cutting performance and wear mechanism of nanoscale and microscale textured Al2O3/TiC ceramic tools in dry cutting of hardened steel , 2014 .

[4]  William E Lee,et al.  Microstructure and rheological properties of titanium carbide-coated carbon black particles synthesised from molten salt , 2013, Journal of Materials Science.

[5]  P. Baumli,et al.  Fabrication of carbon fiber reinforced aluminum matrix composites via a titanium-ion containing flux , 2013 .

[6]  A. K. Tyagi,et al.  Synthesis, characterization and evaluation of titanium carbonitride surface layers with varying concentrations of carbon and nitrogen , 2012 .

[7]  R. Nomen,et al.  Thermal behavior of oxidation of TiN and TiC nanoparticles , 2011 .

[8]  S. Tao,et al.  Effect of annealing temperature on microstructure, hardness and adhesion properties of TiSixNy superhard coatings , 2011 .

[9]  Yaogen Shen,et al.  Effect of oxidation temperature on microstructure, mechanical behaviors and surface morphology of nanocomposite Ti–Cx–Ny thin films , 2011 .

[10]  Z. Hu,et al.  Fabrication and oxidation resistance of titanium carbide-coated carbon fibres by reacting titanium hydride with carbon fibres in molten salts , 2009 .

[11]  X. Liu,et al.  Low‐Temperature Preparation of Titanium Carbide Coatings on Graphite Flakes from Molten Salts , 2008 .

[12]  B. Rand,et al.  Preparation of a titanium carbide coating on carbon fibre using a molten salt method , 2008 .

[13]  J. M. Córdoba,et al.  Synthesis of Titanium Carbonitride Phases by Reactive Milling of the Elemental Mixed Powders , 2005 .

[14]  V. Medri,et al.  Synthesis of ultrafine titanium carbonitride powders , 2001 .

[15]  S. Zhang,et al.  In-situ synthesis and wear performance of TiC particle reinforced composite coating on alloy Ti6Al4V , 2001 .

[16]  Gerry Byrne,et al.  Cutting tool wear in the machining of hardened steels: Part I: alumina/TiC cutting tool wear , 2001 .

[17]  M. Iwaki,et al.  Improvement of high-temperature oxidation resistance of titanium nitride and titanium carbide films by aluminum ion implantation , 1998 .

[18]  J. Bouix,et al.  Influence of carbide coatings on the oxidation behavior of carbon fibers , 1995 .