Microstructure Evolution and Tensile Properties of Forged Mg-Zn-Zr Alloys: Effects of Zr Microalloying

[1]  Jie Zhou,et al.  Corrosion resistance and tribological behavior of ZK30 magnesium alloy coated by plasma electrolytic oxidation , 2021, Surface and Coatings Technology.

[2]  M. Sajid,et al.  Deformation behavior of Mg–Zn–Zr magnesium alloy on the basis of macro-texture and fine-grain size under tension and compression loading along various directions , 2020 .

[3]  Wei Wang,et al.  Revisiting the role of Zr micro-alloying in a Mg-Nd-Zn alloy , 2020 .

[4]  G. Zeng,et al.  Microstructural Study of a Mg–Zn–Zr Alloy Hot Compressed at a High Strain Rate , 2020, Materials.

[5]  I. Beyerlein,et al.  Influence of plastic properties on the grain size effect on twinning in Ti and Mg , 2020 .

[6]  Daokui Xu,et al.  Deformation and fracture mechanisms of an annealing-tailored “bimodal” grain-structured Mg alloy , 2019, Journal of Materials Science & Technology.

[7]  Joshua S. Herrington,et al.  Interplay between the effects of deformation mechanisms and dynamic recrystallization on the failure of Mg-3Al-1Zn , 2019, Acta Materialia.

[8]  D. StJohn,et al.  Effect of ultrasonic treatment on the alloying and grain refinement efficiency of a Mg – Zr master alloy added to magnesium at hypo- and hyper-peritectic compositions , 2019, Journal of Crystal Growth.

[9]  K. Guan,et al.  Microstructural characterization of intermetallic phases in a solution-treated Mg–5.0Sm–0.6Zn–0.5Zr (wt%) alloy , 2018, Materials Characterization.

[10]  A. Hadadzadeh,et al.  Bimodal grain microstructure development during hot compression of a cast-homogenized Mg-Zn-Zr alloy , 2018 .

[11]  Meng Huang,et al.  Deformation Behavior of Ultra-Strong and Ductile Mg-Gd-Y-Zn-Zr Alloy with Bimodal Microstructure , 2018, Metallurgical and Materials Transactions A.

[12]  O. Ruano,et al.  Superplasticity in a commercially extruded ZK30 magnesium alloy , 2018 .

[13]  A. Hadadzadeh,et al.  A new grain orientation spread approach to analyze the dynamic recrystallization behavior of a cast-homogenized Mg-Zn-Zr alloy using electron backscattered diffraction , 2018 .

[14]  S. K. Shaha,et al.  Microstructure, texture and mechanical behavior characterization of hot forged cast ZK60 magnesium alloy , 2017 .

[15]  M. Jiang,et al.  High-speed extrusion of dilute Mg-Zn-Ca-Mn alloys and its effect on microstructure, texture and mechanical properties , 2016 .

[16]  Ke Huang,et al.  A review of dynamic recrystallization phenomena in metallic materials , 2016 .

[17]  M. Barszcz,et al.  The forming of magnesium alloy forgings for aircraft and automotive applications , 2016 .

[18]  F. Mücklich,et al.  Precipitation hardening of an Mg-5Zn-2Gd-0.4Zr (wt. %) alloy , 2016 .

[19]  J. El-Awady,et al.  Grain size effects on dislocation and twinning mediated plasticity in magnesium , 2016 .

[20]  J. Robson,et al.  The interaction of grain refinement and ageing in magnesium–zinc–zirconium (ZK) alloys , 2015 .

[21]  H. Asgari,et al.  Grain size dependence of dynamic mechanical behavior of AZ31B magnesium alloy sheet under compressive shock loading , 2015 .

[22]  Shigeharu Kamado,et al.  Effect of microalloyed Zr on the extruded microstructure of Mg–6.2Zn-based alloys , 2014 .

[23]  D. Ando,et al.  The role of deformation twinning in the fracture behavior and mechanism of basal textured magnesium alloys , 2014 .

[24]  Ke Yang,et al.  The in vitro degradation process and biocompatibility of a ZK60 magnesium alloy with a forsterite-containing micro-arc oxidation coating. , 2013, Acta biomaterialia.

[25]  W. Ke,et al.  Influence of grain size on the tensile ductility and deformation modes of rolled Mg–1.02 wt.% Zn alloy , 2013 .

[26]  H. Watanabe.  Effect of Second-Phase Precipitates on Local Elongation in Extruded Magnesium Alloys , 2013, Journal of Materials Engineering and Performance.

[27]  Guohua Wu,et al.  Grain Refinement of Magnesium Alloys by Mg–Zr Master Alloys: The Role of Alloy Chemistry and Zr Particle Number Density , 2013 .

[28]  Chun‐Sing Lee,et al.  Shear band formation during hot compression of AZ31 Mg alloy sheets , 2012 .

[29]  Lei Zhang,et al.  Calculation of Schmid factors in magnesium: Analysis of deformation behaviors , 2012 .

[30]  K. T. Ramesh,et al.  Rate-dependent hardening due to twinning in an ultrafine-grained magnesium alloy , 2012 .

[31]  F. Chmelík,et al.  Grain size effects on deformation twinning in an extruded magnesium alloy tested in compression , 2011 .

[32]  J. Driver,et al.  Temperature dependency of slip and twinning in plane strain compressed magnesium single crystals , 2011 .

[33]  D. Sun,et al.  Microstructural study of strain localization in hot compressed Mg–3Al–1Zn alloy , 2010 .

[34]  K. Hono,et al.  Effect of Zr addition on the mechanical properties of as-extruded Mg–Zn–Ca–Zr alloys , 2010 .

[35]  T. Ohkubo,et al.  Bimodally grained microstructure development during hot extrusion of Mg–2.4 Zn–0.1 Ag–0.1 Ca–0.16 Zr (at.%) alloys , 2009 .

[36]  D. StJohn,et al.  The Loss of Dissolved Zirconium in Zirconium-Refined Magnesium Alloys after Remelting , 2009 .

[37]  P. Čížek,et al.  Characteristics of the contraction twins formed close to the fracture surface in Mg–3Al–1Zn alloy deformed in tension , 2008 .

[38]  I. Shigematsu,et al.  Mechanical properties of Mg–Al–Zn alloy with a tilted basal texture obtained by differential speed rolling , 2008 .

[39]  C. Tomé,et al.  Grain size effects on the tensile properties and deformation mechanisms of a magnesium alloy, AZ31B, sheet , 2008 .

[40]  M. Barnett.  Twinning and the ductility of magnesium alloys: Part II. “Contraction” twins , 2007 .

[41]  A. Ghosh,et al.  Deformation behavior of ultrafine-grain (UFG) AZ31B Mg alloy at room temperature , 2006 .

[42]  J. Koike.  Enhanced deformation mechanisms by anisotropic plasticity in polycrystalline Mg alloys at room temperature , 2005 .

[43]  Guohua Wu,et al.  Exceptional grain refinement of Mg-Zr master alloy treated by tungsten inert gas arc re-melting with ultra-high frequency pulses , 2022, Scripta Materialia.