论文信息 - A flying gauge change model in tandem cold strip mill

A flying gauge change model in tandem cold strip mill

The flying gauge change (FGC) model is an important control model for continuous tandem cold strip mill, which determines whether the welded strip with different gauges can be shifted stably during cold strip rolling. In the paper, a model has been developed successfully for satisfying the requirement of FGC control in tandem cold strip mill with the conditions of different strip gauges and tensions. An optimum model of the roll gap dynamic setup has been built up to compensate the influence of deviations between the setup values and the real values of strip thickness, and the effect of the deformation resistance of strip on the thickness accuracy. The practical application verifies that the optimum model of the FGC rolling meets the requirement of the rolled strip thickness accuracy and can improve the rolling stability.

[1] N. Venkata Reddy,et al. A set-up model for tandem cold rolling mills , 2001 .

[2] Zhengyi Jiang,et al. Effect of rolling parameters on cold rolling of thin strip during work roll edge contact , 2003 .

[3] Toru Kaneko,et al. Development of Cold Rolling Technology for High Thickness Accuracy and Excellent Tensile Property Sheet , 1997 .

[4] Y. Washikita,et al. MODERNIZATION OF GAGE CONTROL SYSTEM AT SUMITOMO WAKAYAMA 5-STAND COLD MILL , 1999 .

[5] Hideo Kijima,et al. Improvement of the accuracy in thickness during flying gauge change in tandem cold mills , 1998 .

[6] Y. Nakagawa,et al. Automatic rolling technology for a fully continuous cold tandem mill , 1998 .

[7] G. Keintzel,et al. Automation of a linked pickling and tandem mill at Bethlehem Steel , 2001 .

[8] Brian G. Thomas,et al. Prediction and control of subsurface hooks in continuous cast ultra-low-carbon steel slabs , 2009 .