Quality assessment of used-products under uncertain age and usage conditions

Quality of a used-product is often highly uncertain, impacts pricing decisions, and is influenced by many factors like age and usage. However, analysis of usage and its uncertain nature is not well understood. In this paper, joint effects of age and usage on quality of used/end-of-life products are analysed. To conduct this research, Product State Transformation Diagram is proposed and used to analyse quality of used-products under uncertain age and usage conditions. Subsequently, governing multivariate stochastic partial differential equation is derived and paired with operational conditions to develop Quality Degradation Model (QDM). Then, QDM is numerically analysed and compared with common age-based model. Results indicate that age-based models overestimate quality. Using one-factor-at-time approach, sensitivity of QDM to its parameters and inputs is analysed. In a real-life case study, QDM is applied to evaluate prices of used-cars. To validate QDM and to generate insights towards its accuracy, a pool of popular statistical and machine learning models are trained and compared with QDM. Results show that performance of QDM is comparable to known models like SVM, LR, ANN-MLP for this application.

[1]  M. Kubát.  An Introduction to Machine Learning , 2017, Springer International Publishing.

[2]  Qingdi Ke,et al.  Proactive remanufacturing timing determination method based on residual strength , 2015 .

[3]  Christos Zikopoulos,et al.  On the attractiveness of sorting before disassembly in remanufacturing , 2008 .

[4]  Margaret J. Robertson,et al.  Design and Analysis of Experiments , 2006, Handbook of statistics.

[5]  V. Guide,et al.  Closed‐Loop Supply Chains: An Introduction to the Feature Issue (Part 1) , 2006 .

[6]  Weihua Liu,et al.  Refund policies for cores with quality variation in OEM remanufacturing , 2015 .

[7]  Bernhard Schölkopf,et al.  A tutorial on support vector regression , 2004, Stat. Comput..

[8]  Michael R. Galbreth,et al.  Optimal Acquisition and Sorting Policies for Remanufacturing , 2006 .

[9]  William E. Schiesser,et al.  A Compendium of Partial Differential Equation Models: Three-Dimensional Partial Differential Equation , 2009 .

[10]  R. Dekker,et al.  Modelling product returns in inventory control - exploring the validity or general assumptions , 2001 .

[11]  William E. Schiesser,et al.  A Compendium of Partial Differential Equation Models: Preface , 2009 .

[12]  Ho-Gyun Kim.  The Optimal Warranty Servicing for Repairable Products with Phase-Type Lifetime Distributions , 1997 .

[13]  Jaime A. Camelio,et al.  Partial disassembly sequencing considering acquired end-of-life product age distributions , 2014 .

[14]  William E. Schiesser,et al.  A Compendium of Partial Differential Equation Models: Frontmatter , 2009 .

[15]  Vedat Verter,et al.  Investing in reusability of products of uncertain remanufacturing cost: The role of inspection capabilities , 2012 .

[16]  Richard Fries.  Analysis of Field Data , 2016 .

[17]  Markus Klausner,et al.  Reverse-Logistics Strategy for Product Take-Back , 2000, Interfaces.

[18]  Shaligram Pokharel,et al.  Pricing used products for remanufacturing , 2009, Eur. J. Oper. Res..

[19]  Surajit Pal,et al.  An application of Gumbel's bivariate exponential distribution in estimation of warranty cost of motor cycles , 2003 .

[20]  Simon P. Wilson,et al.  Calculating the reserve for a time and usage indexed warranty , 1997 .

[21]  Simon P. Wilson,et al.  Failure models indexed by two scales , 1998, Advances in Applied Probability.

[22]  Johan Östlin,et al.  Product life-cycle implications for remanufacturing strategies , 2009 .

[23]  John D. Kalbfleisch,et al.  Methods for the analysis and predic tion of warranty claims , 1991 .

[24]  Min Jung,et al.  Analysis of field data under two-dimensional warranty , 2007, Reliab. Eng. Syst. Saf..

[25]  Serra Caner Bulmus,et al.  Optimal core acquisition and pricing strategies for hybrid manufacturing and remanufacturing systems , 2014 .

[26]  Jaime A. Camelio,et al.  Value flow characterization during product lifecycle to assist in recovery decisions , 2007 .

[27]  M. Toffel.  Strategic Management of Product Recovery , 2004 .

[28]  Jennifer L. Hartnett,et al.  Managing Quality: The Strategic and Competitive Edge , 1988 .

[29]  H. Kaebernick,et al.  Remaining life estimation of used components in consumer products: Life cycle data analysis by Weibull and artificial neural networks , 2007 .

[30]  Kwei Tang,et al.  Cost analysis of two-attribute warranty policies based on the product usage rate , 1999 .

[31]  B. M. Rao,et al.  Expected warranty cost of two-attribute free-replacement warranties based on a bivariate exponential distribution , 2000 .

[32]  Mahmood Shafiee,et al.  Two-Dimensional Warranty Cost Analysis for Second-Hand Products , 2011 .

[33]  Jie Mi,et al.  Warranty policies and burn-in , 1997 .

[34]  Herbert Moskowitz,et al.  A poisson regression model for two‐attribute warranty policies , 1994 .

[35]  Luc Muyldermans,et al.  Hewlett-Packard Company Unlocks the Value Potential from Time-Sensitive Returns , 2005, Interfaces.

[36]  F. Mallor,et al.  An introduction to statistical modelling of extreme values. Application to calculate extreme wind speeds , 2009 .

[37]  Hong-Chao Zhang,et al.  Remaining Useful Life Assessment and its Application in the Decision for Remanufacturing , 2014 .

[38]  Tom Chen,et al.  Maintenance policies with two-dimensional warranty , 2002, Reliab. Eng. Syst. Saf..

[39]  D. N. Prabhakar Murthy,et al.  A new repair-replace strategy for items sold with a two-dimensional warranty , 2005, Comput. Oper. Res..

[40]  Ingram Olkin,et al.  The Exponential Distribution , 2007 .

[41]  Ruud H. Teunter,et al.  Optimal core acquisition and remanufacturing policies under uncertain core quality fractions , 2011, Eur. J. Oper. Res..

[42]  D. N. P. Murthy,et al.  Product warranty management -- I: A taxonomy for warranty policies , 1992 .

[43]  S. Ryan,et al.  Using forecasted information from early returns of used products to set remanufacturing capacity , 2006 .

[44]  D. N. P. Murthy,et al.  Two-Dimensional Failure-Free Warranty Policies: Two-Dimensional Point Process Models , 1995, Oper. Res..

[45]  Gilvan C. Souza,et al.  Multiperiod Remanufacturing Planning With Uncertain Quality of Inputs , 2010, IEEE Transactions on Engineering Management.

[46]  Caglar S. Aksezer,et al.  Failure analysis and warranty modeling of used cars , 2011 .

[47]  Xiang Li,et al.  Optimal acquisition and production policy in a hybrid manufacturing/remanufacturing system with core acquisition at different quality levels , 2014, Eur. J. Oper. Res..

[48]  김호균.  The Optimal Warranty Servicing for Repairable Products with Phase-Type Lifetime Distributions , 1997 .

[49]  Abdelhakim Khatab,et al.  State of the art review of quality, reliability and maintenance issues in closed-loop supply chains with remanufacturing , 2017, Int. J. Prod. Res..