Estimation of Unbalanced Loads in Washing Machines Using Fuzzy Neural Networks

The performance of the washing machines is limited by the grouping of the clothes in spinning cycle, generally called as the unbalanced load (UL). The UL may cause vibrations, noise, and possible damage to the machine; therefore, accurate estimation of ULs, including their magnitudes and locations in washing drum, is required. In this paper, we propose an approach to evaluate the position and mass of the UL in a horizontal loading washing machine. The approach uses fuzzy logic and artificial neural networks to obtain fast and accurate estimate of the UL. An experimental system has been developed and the algorithms are implemented on a real-time system to show the effectiveness of the approach. Successful experiments involving a distribution algorithm suggests that UL estimation and elimination in real time is possible.

[1]  E. H. Mamdani,et al.  Twenty years of fuzzy control: experiences gained and lessons learnt , 1993, [Proceedings 1993] Second IEEE International Conference on Fuzzy Systems.

[2]  M.A. Masrur,et al.  Model-based fault diagnosis in electric drives using machine learning , 2006, IEEE/ASME Transactions on Mechatronics.

[3]  Alexander G. Parlos,et al.  Induction motor fault diagnosis based on neuropredictors and wavelet signal processing , 2002 .

[4]  Toshio Fukuda,et al.  An exoskeletal robot for human shoulder joint motion assist , 2003 .

[5]  Wang Zhiyan,et al.  An active control strategy of vibration attenuation system based on nonlinear decoupling , 2003, 2003 IEEE International Symposium on Industrial Electronics ( Cat. No.03TH8692).

[6]  R.V. Patel,et al.  Stable identification of nonlinear systems using neural networks: theory and experiments , 2006, IEEE/ASME Transactions on Mechatronics.

[7]  Yangmin Li,et al.  Parameters identification and vibration control for modular manipulators , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[8]  Patrick van der Smagt,et al.  Introduction to neural networks , 1995, The Lancet.

[9]  P. Meckl,et al.  Intelligent feedforward control and payload estimation for a two-link robotic manipulator , 2003 .

[10]  L. Wang,et al.  Fuzzy systems are universal approximators , 1992, [1992 Proceedings] IEEE International Conference on Fuzzy Systems.

[11]  Won-jong Kim,et al.  Adaptive-Neuro-Fuzzy-Based Sensorless Control of a Smart-Material Actuator , 2011, IEEE/ASME Transactions on Mechatronics.

[12]  H. Yamamoto,et al.  Development of the vibration control system "G-Fall Balancer" for a drum type washer/dryer , 2003, Proceedings 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2003).

[13]  Jintai Chung,et al.  DYNAMIC ANALYSIS OF AN AUTOMATIC DYNAMIC BALANCER FOR ROTATING MECHANISMS , 1999 .

[14]  Yingqin Yuan.  Sensor fusion based testing station for unbalanced load estimation in horizontal washing machines , 2008, 2008 IEEE Instrumentation and Measurement Technology Conference.

[15]  Leehter Yao,et al.  Learning of Hybrid Fuzzy Controller for the Optical Data Storage Device , 2006, IEEE/ASME Transactions on Mechatronics.

[16]  S. Preitl,et al.  Design and Experiments for a Class of Fuzzy Controlled Servo Systems , 2008, IEEE/ASME Transactions on Mechatronics.

[17]  Insop Song,et al.  Soft-Computing-Based Embedded Design of an Intelligent Wall/Lane-Following Vehicle , 2008, IEEE/ASME Transactions on Mechatronics.

[18]  F. Lin,et al.  A hybrid computed torque controller using fuzzy neural network for motor-quick-return servo mechanism , 2001 .

[19]  George J. Klir,et al.  Fuzzy sets and fuzzy logic - theory and applications , 1995 .

[20]  Martin T. Hagan,et al.  An introduction to the use of neural networks in control systems , 2002 .

[21]  Jian Huang,et al.  Model-Based Intelligent Fault Detection and Diagnosis for Mating Electric Connectors in Robotic Wiring Harness Assembly Systems , 2008, IEEE/ASME Transactions on Mechatronics.

[22]  Kaspar Althoefer,et al.  Pipe inspection using a laser-based transducer and automated analysis techniques , 2003 .

[23]  Evangelos Papadopoulos,et al.  Modeling, design and control of a portable washing machine during the spinning cycle , 2001, 2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Proceedings (Cat. No.01TH8556).

[24]  Xiaoping Liu,et al.  Parameter identification and vibration control in Modular manipulators , 2004, IEEE/ASME Transactions on Mechatronics.

[25]  Ferhat Daldaban,et al.  Phase inductance estimation for switched reluctance motor using adaptive neuro-fuzzy inference system , 2006 .

[26]  M. Azizur Rahman,et al.  Online self-tuning ANN-based speed control of a PM DC motor , 1997 .

[27]  Kok-Meng Lee,et al.  Harnessing Embedded Magnetic Fields for Angular Sensing With Nanodegree Accuracy , 2012, IEEE/ASME Transactions on Mechatronics.

[28]  Erdinc Altug,et al.  Determining the mass and angular position of the unbalanced load in horizontal washing machines , 2009, 2009 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[29]  Li-Xin Wang,et al.  Adaptive fuzzy systems and control , 1994 .

[30]  F. Ashrafzadeh,et al.  Unbalanced Load Estimation Algorithm Using Multiple Mechanical Measurements for Horizontal Washing Machines , 2007, 2007 IEEE Sensors.