Thermo‐oxidative stability study of polypropylene composites by using cone calorimetry and thermogravimetry

The flammability of polypropylene (PP) and recycled PP composite systems was thoroughly investigated by using cone calorimetry and thermogravimetry techniques in order to quantify the effect of brominated and chlorinated fire-retardant systems. In this study, the efficiency of the fire-retarding systems was defined from the relation between the amount of fire retardants and the characteristic quantities in cone calorimetry (M-HRR, THR, and M-EHC) and the limited oxygen index. The brominated fire retardants showed fire-retarding capability superior to that of the chlorinated systems, and the recycled polymer was thermo-oxidatively stabler than the pristine PP systems seemingly because of the fillers and blended polymers. Comparing the degradation behaviors of the composite systems in nitrogen and air environments, the halogen compounds retarded the decomposition rates in both cases, deactivating the reactive radicals of the polymer and restricting the flammable gases from being diffused into the unreacted polymer. Overall, the optimal amounts of fire retardants in different polymeric systems could be evaluated and correlated with several fire indicators in a relatively simple manner.

[1]  J. Nam,et al.  Thermo-Oxidative Stability of High Performance Composites under Thermal Cycling Conditions , 2001 .

[2]  J. Nam,et al.  The Study on Phase Separation Development by Curing Reaction Rate for Unsaturated Polyester/Polyvinylacetate Semi-IPN , 2001 .

[3]  P. Dubois,et al.  Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials , 2000 .

[4]  Bin Li.  A study of thermal degradation and decomposition of rigid poly(vinyl chloride) with metal oxides using thermogravimetry and cone calorimetry , 2000 .

[5]  Michelle K. Donnelly,et al.  Reduced gravity combustion of thermoplastic spheres , 2000 .

[6]  M. Checchin,et al.  Use of cone calorimeter for evaluating fire performances of polyurethane foams , 1999 .

[7]  M. Hardy,et al.  Regulatory status and environmental properties of brominated flame retardants undergoing risk assessment in the EU: DBDPO, OBDPO, PeBDPO and HBCD , 1999 .

[8]  S. Levchik,et al.  Phosphorus oxynitride: a thermally stable fire retardant additive for polyamide 6 and poly(butylene terephthalate) , 1999 .

[9]  Shih-hsuan Chiu,et al.  Dynamic flame retardancy of polypropylene filled with ammonium polyphosphate, pentaerythritol and melamine additives , 1998 .

[10]  B. Mortaigne,et al.  Thermal degradation and fire behaviour of unsaturated polyester with chain ends modified by dicyclopentadiene , 1998 .

[11]  G. Camino,et al.  Fire-retardant mechanistic aspects of melamine cyanurate in polyamide copolymer , 1997 .

[12]  Sabu Thomas,et al.  Flame retardant properties of binary blends: a comparison of miscible and immiscible blends , 1997 .

[13]  Kazuhiko Fukushima,et al.  Effect of the fire-retardant, melamine, on the combustion and the thermal decomposition of polyamide-6, polypropylene and low-density polyethylene , 1997 .

[14]  P. Cusack,et al.  Zinc hydroxystannate as an alternative synergist to antimony trioxide in polyester resins containing halogenated flame retardants , 1997 .

[15]  P. Carty,et al.  Flame‐retardancy and Smoke‐suppression Studies on Ferrocene Derivatives in PVC , 1996 .

[16]  E. Weil,et al.  A paradoxical flame‐retardant effect of nitrates in ATH‐filled ethylene–vinyl acetate copolymer , 1995 .

[17]  Lazaros Tsantaridis,et al.  Correlation between cone calorimeter data and time to flashover in the room fire test , 1994 .

[18]  L. Goff.  Investigation of polymeric materials using the cone calorimeter , 1993 .

[19]  X. Xiaoming,et al.  Studies on characteristics and mechanisms of X–MoO3 synergism in fire‐retarded epoxy resin , 1992 .

[20]  C. F. Cullis,et al.  Studies of the effects of phosphorus and its compounds on the combustion of cellulose , 1992 .

[21]  J. Nam,et al.  Generalized composite degradation kinetics for polymeric systems under isothermal and nonisothermal conditions , 1992 .

[22]  Jae-Do Nam,et al.  Initial polymer degradation as a process in the manufacture of carbon-carbon composites , 1992 .

[23]  J. Nam,et al.  A composite methodology for multistage degradation of polymers , 1991 .

[24]  G. Nelson.  Fire and Polymers: Hazards Identification and Prevention , 1990 .

[25]  Harry S. Katz,et al.  Handbook of fillers and reinforcements for plastics , 1978 .

[26]  R. E. Smallman,et al.  An assessment of high voltage electron microscopy (HVEM). An invited review , 1977 .