Effects of exposure temperature on degradation of polyphenylene sulfide non-woven bag-filter media by NO2 gas at high temperature

[1]  W. Hsu,et al.  Effect of the operation temperature on the hydrodynamics and performances of a cyclone separator , 2022, Advanced Powder Technology.

[2]  W. Hsu,et al.  Performance Characterization of a Novel Compact Dust Collector with Pleated Filter Cartridges , 2022, Separation and Purification Technology.

[3]  Zhenbo Lan,et al.  Thermal Aging Effects on the Mechanical Behavior of Glass-Fiber-Reinforced Polyphenylene Sulfide Composites , 2022, Polymers.

[4]  Zaijun Lu,et al.  Polyphenylene sulfide fabric with enhanced oxidation resistance and hydrophobicity through polybenzoxazine surface coating for emission control in harsh environment. , 2022, Journal of hazardous materials.

[5]  G. Shi,et al.  Research on the influence of pleat structure on effective filtration area during dust loading , 2022, Powder Technology.

[6]  Tomonori Fukasawa,et al.  Effects of surface finish of nonwoven fabric bag filters on filter efficiency , 2021, Chemical Engineering & Technology.

[7]  Tomonori Fukasawa,et al.  Effects of NO2 gas concentration on the degradation of polyphenylene sulfide non-woven bag filter at high temperature , 2021 .

[8]  Xianbo Huang,et al.  Thermal aging performance of glass fiber/polyphenylene sulfide composites in high temperature , 2021 .

[9]  M. Sakai,et al.  Direct numerical simulation of permeation of particles through a realistic fibrous filter obtained from X-ray computed tomography images utilizing signed distance function , 2021, Powder Technology.

[10]  F. Barbe,et al.  Experiments based analysis of thermal decomposition kinetics model. Case of carbon fibers PolyPhenylene Sulfide composites , 2021 .

[11]  I. Kimura,et al.  Distributions of Fiber Mass, Air Permeability, and Filter Efficiency in Nonwoven Fabric Bag Filters , 2021 .

[12]  Lin Yang,et al.  Heat-setting Effect on the Morphology and Phase Structures of PPS Nonwovens , 2020 .

[13]  Xiangyu Jin,et al.  Polytetrafluoroethylene (PTFE)/Polyphenylene Sulfide (PPS) Needle-Punched Triboelectric Air Filter for Efficient Particulate Matter Removal. , 2019, ACS applied materials & interfaces.

[14]  Tomonori Fukasawa,et al.  A continuous-flow exposure method to determine degradation of polyphenylene sulfide non-woven bag-filter media by NO2 gas at high temperature , 2019 .

[15]  M. Afrand,et al.  Effects of multi inlet guide channels on the performance of a cyclone separator , 2019, Powder Technology.

[16]  Juan Yu,et al.  Polyphenylene sulfide (PPS) fibrous felt coated with conductive polyaniline via in situ polymerization for smart high temperature bag-filter , 2019, Materials Research Express.

[17]  J. Fitoussi,et al.  Overall Investigation of Poly (Phenylene Sulfide) from Synthesis and Process to Applications—A Review , 2019, Macromolecular Materials and Engineering.

[18]  Chikao Kanaoka.  Fine Particle Filtration Technology Using Fiber as Dust Collection Medium , 2019, KONA Powder and Particle Journal.

[19]  J. Fitoussi,et al.  Multiscale physicochemical characterization of a short glass fiber-reinforced polyphenylene sulfide composite under aging and its thermo-oxidative mechanism , 2018, Polymers for Advanced Technologies.

[20]  Y. Ye,et al.  Effect of Corona Discharge on Polyphenylene Sulfide Filter Material of Electrostatic–Bag Composite Precipitators , 2018 .

[21]  Kunihiro Fukui,et al.  Classification performance analysis of a novel cyclone with a slit on the conical part by CFD simulation , 2018 .

[22]  Jörg Meyer,et al.  The contribution of small leaks in a baghouse filter to dust emission in the PM2.5 range—A system approach , 2017 .

[23]  B. Cheng,et al.  Effects of hydrogen bonding between MWCNT and PPS on the properties of PPS/MWCNT composites , 2016 .

[24]  K. Cen,et al.  Numerical simulation on the fine particle charging and transport behaviors in a wire-plate electrostatic precipitator , 2016 .

[25]  Gongren Hu,et al.  Oxidation degradation of polyphenylene sulfide needle felt at different sulfuric acid dew point temperatures , 2015 .

[26]  Xin Sun,et al.  A generalized kinetic model for heterogeneous gas-solid reactions. , 2012, The Journal of chemical physics.

[27]  Jie Yang,et al.  Thermal cross-link behavior of an amorphous poly (para-arylene sulfide sulfone amide) , 2011 .

[28]  Zhu Meifang,et al.  Kinetics of the thermal degradation of hyperbranched poly(phenylene sulfide) , 2009 .

[29]  K. Nitta,et al.  Mechanical degradation of filter polymer materials: Polyphenylene sulfide , 2006 .

[30]  K. Nitta,et al.  Degradation of semi-crystalline PPS bag-filter materials by NO and O2 at high temperature , 2006 .

[31]  D. Fino,et al.  A multifunctional filter for the simultaneous removal of fly-ash and NOx from incinerator flue gases , 2004 .

[32]  R. T. Hawkins.  Chemistry of the Cure of Poly(p-phenylene sulfide) , 1976 .

[33]  V. Weekman,et al.  Chemical Reaction Engineering , 1974 .

[34]  E. Tanabe,et al.  Evaluation of operating conditions during the pulse jet cleaning filtration using different surface treated fibrous filters , 2017 .

[35]  Ki-Hyun Kim,et al.  A review on the human health impact of airborne particulate matter. , 2015, Environment international.

[36]  Renjian Zhang,et al.  Chemical characterization and source apportionment of PM 2 . 5 in Beijing : seasonal perspective , 2013 .

[37]  K. Nitta,et al.  Degradation of bag-filter non-woven fabrics by nitric oxide at high temperatures , 2007 .

[38]  Qingyue Wang,et al.  FTIR-PAS investigation on polyphenylene sulphide , 1991 .