The Effect of the Selection of Three-Dimensional Random Numerical Soil Models on Strip Foundation Settlements

This paper delivers a probabilistic attempt to prove that the selection of a random three-dimensional finite element (FE) model of a subsoil affects the computed settlements. Parametric analysis of a random soil block is conducted, assuming a variable subsoil Young’s modulus in particular finite elements. The modulus is represented by a random field or different-sized sets of random variables; in both cases, the same truncated Gaussian model is assumed. Mean values and standard deviations of random soil settlement are estimated by a Monte Carlo simulation procedure. With regard to the adopted FE model, the estimated settlement mean values do not vary significantly, but standard deviations do strongly. Similarities also appear in the diagrams of random field correlation length versus settlement standard deviation and the diagrams displaying a total number of model random variables versus settlement standard deviation. Thus, relevant single random variable models represent the random field approach well with regard to settlement parameter estimation. This remark is verified upon a settlement analysis of a three-dimensional FE model of a hypothetical strip foundation. Following the preliminary model observations, various probabilistic geotechnical analyses may be supported, e.g., continuous footing design, slope stability analysis, and foundation reliability assessment.

[1]  K. Phoon,et al.  Effective Young’s modulus of a spatially variable soil mass under a footing , 2018, Structural Safety.

[2]  A. Soubra,et al.  Kriging-Based Reliability Analysis of Strip Footings Resting on Spatially Varying Soils , 2018, Journal of Geotechnical and Geoenvironmental Engineering.

[3]  J. Campbell.  SPATIAL VARIABILITY OF SOILS , 1979 .

[4]  M. Chwała,et al.  Random bearing capacity evaluation of shallow foundations for asymmetrical failure mechanisms with spatial averaging and inclusion of soil self-weight , 2018, Computers and Geotechnics.

[5]  A. Truty.  On consistent nonlinear analysis of soil–structure interaction problems , 2018, Studia Geotechnica et Mechanica.

[6]  J. Górski,et al.  Shells with random geometric imperfections simulation — based approach , 2002 .

[7]  H. Zheng,et al.  Numerical study of soil-rock mixture: Generation of random aggregate structure , 2018 .

[8]  Jacek Tejchman,et al.  Modeling of bearing capacity of footings on sand within stochastic micro‐polar hypoplasticity , 2011 .

[9]  Władyslaw Knabe,et al.  Spatial averages for linear elements for two-parameter random field , 1998 .

[10]  Dian-Qing Li,et al.  Reliability-based robust geotechnical design using Monte Carlo simulation , 2017, Bulletin of Engineering Geology and the Environment.

[11]  G. Pande,et al.  Stochastic Finite Element Analysis using Polynomial Chaos , 2016 .

[12]  Karol Winkelmann,et al.  Probabilistic analysis of settlements under a pile foundation of a road bridge pylon , 2020 .

[13]  Yu-xin Jie,et al.  Generation of 3D random meso-structure of soil-rock mixture and its meso-structural mechanics based on numerical tests , 2015 .

[14]  Tomasz Mikulski,et al.  Effect of geometric imperfections on aluminium silo capacities , 2015 .

[15]  Kok-Kwang Phoon,et al.  Reliability-based design and its complementary role to Eurocode 7 design approach , 2015 .

[16]  P. de Buhan,et al.  A homogenization method for estimating the bearing capacity of soils reinforced by columns , 2005 .

[17]  G. Vessia,et al.  Random field theory to interpret the spatial variability of lacustrine soils , 2015 .

[18]  T. Schweckendiek,et al.  Some observations on ISO2394:2015 Annex D (Reliability of Geotechnical Structures) , 2016 .

[19]  Mircea Grigoriu,et al.  Algorithm for Generating Samples of Homogeneous Gaussian Fields , 2003 .

[20]  Kok-Kwang Phoon,et al.  Reliability analysis with scarce information: Comparing alternative approaches in a geotechnical engineering context , 2013 .

[21]  David Mašín,et al.  Probabilistic analyses of a strip footing on horizontally stratified sandy deposit using advanced constitutive model , 2011 .

[22]  Gordon A. Fenton,et al.  Probabilistic Foundation Settlement on Spatially Random Soil , 2002 .

[23]  Ming Cai,et al.  A numerical homogenization study of the elastic property of a soil-rock mixture using random mesostructure generation , 2018, Computers and Geotechnics.

[24]  Chenfeng Li,et al.  Structural reliability and stochastic finite element methods , 2018, Engineering Computations.

[25]  Th. Zimmermann,et al.  Numerics for geotechnics and structures. Recent developments in ZSoil.PC , 2007 .

[26]  Patrick de Buhan,et al.  An elastoplastic homogenization procedure for predicting the settlement of a foundation on a soil reinforced by columns , 2007 .

[27]  Scott W. Sloan,et al.  Probabilistic stability assessment using adaptive limit analysis and random fields , 2017 .

[28]  Shui-Hua Jiang,et al.  Modelling of spatial variability of soil undrained shear strength by conditional random fields for slope reliability analysis , 2018, Applied Mathematical Modelling.

[29]  W. Puła,et al.  Estimation of the probability distribution of the random bearing capacity of cohesionless soil using the random finite element method , 2015 .

[30]  Bak Kong Low,et al.  FORM, SORM, and spatial modeling in geotechnical engineering , 2014 .

[31]  Abdul-Hamid Soubra,et al.  Probabilistic analysis of strip footings resting on a spatially random soil using subset simulation approach , 2012 .

[32]  L. Zabuski,et al.  Reliability-Based Stability Analysis of a Baltic Cliff by the Combined Response Surface Method , 2020, Geotechnical and Geological Engineering.

[33]  Andrew J. Whittle,et al.  Bearing Capacity of Spatially Random Cohesive Soil Using Numerical Limit Analyses , 2011 .

[34]  Tamara Al-Bittar,et al.  Bearing capacity of strip footings on spatially random soils using sparse polynomial chaos expansion , 2011 .

[35]  M. Ahmadabadi,et al.  Assessment of the application of point estimate methods in the probabilistic stability analysis of slopes , 2015 .

[36]  G. L. Sivakumar Babu,et al.  Influence of Spatial Variability on Pavement Responses Using Latin Hypercube Sampling on Two-Dimensional Random Fields , 2014 .

[37]  Kok-Kwang Phoon,et al.  Characterisation of geotechnical model uncertainty , 2019, Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards.

[38]  D. V. Griffiths,et al.  Three-Dimensional Probabilistic Foundation Settlement , 2005 .

[39]  P. Guo,et al.  A physically meaningful homogenization approach to determine equivalent elastic properties of layered soil , 2018 .

[40]  Bak Kong Low,et al.  Practical second‐order reliability analysis applied to foundation engineering , 2012 .